I am fixing to buy a 5075E with a loader 4x4 and backhoe attachment to do mission work with here in Alaska. I enjoy watching your videos. They helped me make a decision to buy the tractor
The lights are a lot better I would much rather hear the frogs outside the shop than the buzz in the shop.Great video I like how you take the time to explain what you’re doing.
We just bought a 5075E for the farm, ours has the H240 loader, cab, and 4wd The AC in the cab will be nice for hay work! Glad to see you make this video, now I know what I'll be getting into when it comes time to service ours Thanks!
Wished I'd watched you first. Just did my 500 on a 5045E and lost 4 Gallons of diesel following Deere's stupid instructions and dealing with the free flow. Never thought of clamp and no 5045 videos on YT. Found out about you on TractorbyNet. Great video and camera and sound are excellent.
I think you can take a small piece of flashing metal and make a little tray to slip under that filter and direct the oil off the frame and into the pan below. I did that for my boat motor and it works perfect.
Thanks for the reminder Tim! I had been looking at air nozzles and for the life of me could not remember what I needed it for so I did not buy it. When you mentioned the air filter and it hit me; I can't use the nozzle I have to clean my shop vac filter.
Wow, don't think I ever serviced a tractor that clean ! 😊 Have done a lot of them but are usually so nasty or muddy that you have to steam clean just to see where things are ! Yeah, those lights are nice, and NO BUZZING ! I've seen other colors of the hand panties but not the green, gonna have to look for them. Thanks for sharing and take care. 👍
They're making the tractors more compact and it seams everything is in the way. I have the same problem when working on JR (6400). You have to compact yourself to get in there to the filters.
Thanks for the video. Procedure similar to servicing my Workmaster. Just like your Deere the dang dipstick is aggrrvating to access. I prefer white colored filters to mark with a black sharpie for date and hours. I use blue disposable gloves when servicing my New Holland. Never seen green ones before. Thanks again for all the videos.
The funnels are part numbers 720-1087, 720-1088, 720-1089, 821-2734 & 821-2735. According to size. You've set us up for failure on the filter, doesn't look like we offer that yet. Anyways Napa Mike is gonna send you a check for the plug!!!
Yea no cross on that one Brent that’s ok he’s not sure how to get to the Napa store he should try gps in that dodge if it has it hahaha see ya Napa mike
I have actually added a shut off to several of these tractors. Fuel line should run right along the frame rail back to the tank in the rear. I put the valve about even with the steps if I remember right. Been a while since I’ve done one but if I remember correctly that’s how I done it. Take care.
There’s a company called air comb that makes wands for blowing out air filters, radiators, and anything else you need to reach into to blow out. I have the 12” and a 36” wands and use the snot out of them on my tractor. I don’t remember where I got mine from but they were sure worth the money!
cotontop3 oh cool, I got mine a couple 3 years ago and looked for them online back then and couldn’t find anything on them. I have a buddy that drives trucks and he turned me onto them.
Tim, I had a 2012 5075E OOS that had a red fuel shutoff right before the filter. I now have a 2018 Cab 5075E that as the red fuel shutoff right before the filter. I've been looking at the JDParts website and can see it on the Tier2, 3 and IT4 versions, but the first tractors with the FT4 engines do not have a fuel shutoff for some reason.
I hate horizontal filter positions because you can't pre-charged them to prevent blowing a huge snot of air across the bearings on start-up ! In this sort of situation I "pre-wet" the filter media with some of the new oil. Works for me but everyone that's worked with machinery for any length of time has their own habits and tricks !
It seems as though Deere deliberately places their filters in non convenient locations to where owners might prefer the Deere shop over DIY. One reason i am debating on LS over Deere is simplicity of maintaining it myself vs complexity of poor access and time vs shop doing it. Curious how Case does theirs on the 75hp range. Clean tractor though, does it work or gets prepped for shows? From what i here Deere does have really great parts distribution though.
You need to do some mods .fuel shut off on tank or right before filter and cut some more room around that oil filter and repaint the guard.I hate diesel fuel smell get that on you and it stays for days on your leather boots and it's stays for weeks ! I can deal with 90 weight smell seems easier to get rid of that smell of your skin
Im surprised you were able to service a new tractor and didn't need to order some $65 special double extra oddball socket to fit at least one of the drain plugs.
i was teaching a freind how to sevice and change oil in his concrete truck before i got under there he pulled the plug on the hydrolic tank dumped all 20 gallons lol
I have been quite happy with mine. I bought mine with a cab on it. They put in the cheapest radio (Jensen JHD xxxx) and I found a plug and play Jensen JHD 1635BT on Amazon that had am, fm, Bluetooth, Weather, and Sirius for $270. Two Allen bolts and 30 minutes and it was done. Exterior lighting for night use is pretty good front and back. If you want to disconnect the three point quickly, the imatch option is the best $300 you can spend. It runs more than a day on one tank if light duty, and about 6 hours if you are pulling hard (20 gallon tank). The A/C will keep you cool up to about 110 F. Above that, the A/C starts having a hard time keeping it cool, but it is NOT uncomfortable to run that way for hours. I wasn’t going to get the cab option (“too much money, I can work at night on hot days.....”) but am VERY thankful I did get it. I would have had numerous days on the farm where I wouldn’t have worked at all due to the heat without a cab. The rear window opens as well as the two side windows. My only issue was in day one. After about 2 hours of work, I noticed the three point wasn’t lifting all the way. I got out and saw there was a small puddle of hyd fluid under the cab. The seals on the manifold had blown (I found drips on the trailer that I brought it home with, so it was blown before I picked it up). I called the dealer and she had a service truck out to my farm by 3:15 that afternoon. Not a problem since then. All in all, I love the tractor. Instead if a box blade as part of the package, I swapped it for the Frontier 84” rear blade. I used that to cut my 1600 foot long driveway. Lately, I have been using the tractor to prep my field for grass planting next month.
Good service is key. I tried one at our place after it was in the shop like 6 weeks and it died on me a few days later & ended up sitting there for 2(!) weeks before they came back to get it. I ended up getting a Massey 4707 and have loved it the past nearly 2 years & 208 hrs. It’s a tad heavier than I need but works great when using the grapple with logs/trees & no rear weight/attachment needed. Also really love the tires..ag like performance yet r4 smooth. Glad you’ve enjoyed your JD!
Them special JD Green kid glove "hand panties" are a must have to keep from voiding the warranty. Hehehe! Time to start selling a new line of JD CT3 lingerie in your store???😱
Sometimes i wonder what idiot decides to hide the filters or put 20 things around it. I'm an engineer and it makes me made. In the airplane/jet engine business they have people review the design to see there's any issue in getting to certain critical areas. Anyway how many hours have you racked up in her?
Diesel does not bother me near as bad as 90 wt or the new synthetic gear oil chevrolet uses. They think putting a grape scent in it would help, just made it worse. That crap has to wear off instead of wash off.
Brenton meanders like I said before you can leadem to the water but can’t makem drink I sent him a picture of ssx pads if your picking up what I’m putting down see ya Napa mike
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
I am fixing to buy a 5075E with a loader 4x4 and backhoe attachment to do mission work with here in Alaska. I enjoy watching your videos. They helped me make a decision to buy the tractor
The lights are a lot better I would much rather hear the frogs outside the shop than the buzz in the shop.Great video I like how you take the time to explain what you’re doing.
Those frogs were making some noise when I had the door open.
cotontop3 That’s a peaceful sound👍. Good time of the year to go camping. It won’t be long until the whippoorwills get started Thanks for the video
Very Cool Tim, looking forward to the work she'll do for ya..
Take Care Tim and Have a great day.
thanks for sharing. I just got a 5065 and videos like this help so I have a visual idea on what service intervals will be like.
She's ready for Spring! I am going to get one of those funnels- I am tired of cleaning mine out before I can use them. Thanks for the tip!!
Or you can put the funnel after use in a plastic bag.😁
We just bought a 5075E for the farm, ours has the H240 loader, cab, and 4wd The AC in the cab will be nice for hay work! Glad to see you make this video, now I know what I'll be getting into when it comes time to service ours Thanks!
Between you and Wes ya'll have taught me a lot. Thanks. Later.
Love seeing the JD 5075E in the videos.
Wished I'd watched you first. Just did my 500 on a 5045E and lost 4 Gallons of diesel following Deere's stupid instructions and dealing with the free flow. Never thought of clamp and no 5045 videos on YT. Found out about you on TractorbyNet. Great video and camera and sound are excellent.
Placed a WPS shut-off valve on the fuel line today. Saves the clamping, easy and hidden. A theft deterrent, too. Just a thought.
I agree with you on filters most of our tractors have the either under or right on the side of the motor so it runs down everywhere
That's the life of equipment and vehicles is keeping them serviced thank you Tim for sharing.
I think you can take a small piece of flashing metal and make a little tray to slip under that filter and direct the oil off the frame and into the pan below. I did that for my boat motor and it works perfect.
Thanks for making this video. It gave me the confidence to change my own engine in my tractor.
Man I love the tractor videos
Good program on PM for the John Deere. Cheers and Thanks !
Thanks for the reminder Tim! I had been looking at air nozzles and for the life of me could not remember what I needed it for so I did not buy it. When you mentioned the air filter and it hit me; I can't use the nozzle I have to clean my shop vac filter.
Good job
Great service job cotontop3.
Good info I have the 5065 with the same setup. And I will be doing my unit
Wow, don't think I ever serviced a tractor that clean ! 😊 Have done a lot of them but are usually so nasty or muddy that you have to steam clean just to see where things are ! Yeah, those lights are nice, and NO BUZZING !
I've seen other colors of the hand panties but not the green, gonna have to look for them.
Thanks for sharing and take care. 👍
Awesome video Tim. The shop looks good. Later
thanks for this video. it will help when i service my 5065.
Enjoy your video tim thank you for sharing
Great video. Very helpful. Thanks for putting this out there. Just bought the same tractor and will be servicing this spring.
Another learning opportunity. Thanks for sharing.
You need a “form-a-funnel” I bought the large one for my tractor and they’re great!
They're making the tractors more compact and it seams everything is in the way. I have the same problem when working on JR (6400). You have to compact yourself to get in there to the filters.
Good video! I am always picking up something helpful for your videos. Thanks for sharing
Thanks for the video. Procedure similar to servicing my Workmaster. Just like your Deere the dang dipstick is aggrrvating to access. I prefer white colored filters to mark with a black sharpie for date and hours. I use blue disposable gloves when servicing my New Holland. Never seen green ones before. Thanks again for all the videos.
The funnels are part numbers 720-1087, 720-1088, 720-1089, 821-2734 & 821-2735. According to size. You've set us up for failure on the filter, doesn't look like we offer that yet. Anyways Napa Mike is gonna send you a check for the plug!!!
I shoulda gave the oil filter number too 😁
Most of the 5E tractors I've seen use a 7076 Napa Gold oil filter.
Yea no cross on that one Brent that’s ok he’s not sure how to get to the Napa store he should try gps in that dodge if it has it hahaha see ya Napa mike
Brenton has ya covered on the funnel numbers that 2735 is about right and yup checks in the mail hahaha see ya Napa mike
Brenton Medders does your Napa have the half off filter sale on March 12-16?
Hand Panties LMAO!!!!!!! I wear them too when working on equipment. Helps stay a lil bit cleaner
I have actually added a shut off to several of these tractors. Fuel line should run right along the frame rail back to the tank in the rear. I put the valve about even with the steps if I remember right. Been a while since I’ve done one but if I remember correctly that’s how I done it. Take care.
Good man Tim, course the loader brackets make the job a little more interesting for you:)
Take care of it and it will take care of you right Tim
Thanks again for another great video
There’s a company called air comb that makes wands for blowing out air filters, radiators, and anything else you need to reach into to blow out. I have the 12” and a 36” wands and use the snot out of them on my tractor. I don’t remember where I got mine from but they were sure worth the money!
They’re on amazon.
cotontop3 oh cool, I got mine a couple 3 years ago and looked for them online back then and couldn’t find anything on them. I have a buddy that drives trucks and he turned me onto them.
love the video thanks for the service video and sharing tim
Couldn't agree more about gear oil. That smell takes weeks to come out of your skin!
I like that funnel. I think I need a couple of those. One for fuel and maybe one for oil.
Tim, I had a 2012 5075E OOS that had a red fuel shutoff right before the filter. I now have a 2018 Cab 5075E that as the red fuel shutoff right before the filter. I've been looking at the JDParts website and can see it on the Tier2, 3 and IT4 versions, but the first tractors with the FT4 engines do not have a fuel shutoff for some reason.
I have a 2021 and the Wix 57076 filter doesn’t fit. The screw hole diameter is larger on the newer tractor.
thanks tim
I hate horizontal filter positions because you can't pre-charged them to prevent blowing a huge snot of air across the bearings on start-up ! In this sort of situation I "pre-wet" the filter media with some of the new oil. Works for me but everyone that's worked with machinery for any length of time has their own habits and tricks !
Good video CT3
Have an open station 5075e needs some this month.
Thanks
I've seen that before on free flow fuel my 3588 IH use to do that its aggravating
Thank you.
Peep frogs in back ground springs a comin ye ye
It that John Deere gloves or gloves that just happen to be green? Good video. Thanks for sharing.
They’re just green.
I was going to ask if the gloves come with the tractor.
It seems as though Deere deliberately places their filters in non convenient locations to where owners might prefer the Deere shop over DIY. One reason i am debating on LS over Deere is simplicity of maintaining it myself vs complexity of poor access and time vs shop doing it. Curious how Case does theirs on the 75hp range. Clean tractor though, does it work or gets prepped for shows? From what i here Deere does have really great parts distribution though.
You need to do some mods .fuel shut off on tank or right before filter and cut some more room around that oil filter and repaint the guard.I hate diesel fuel smell get that on you and it stays for days on your leather boots and it's stays for weeks ! I can deal with 90 weight smell seems easier to get rid of that smell of your skin
If you can can make video for hydraulic oil change also for same tractor please?
You might check your JD book but I have a smaller JD tractor and the fuel line shut off is on the opposite side of the engine up by the fuel tank.
Im surprised you were able to service a new tractor and didn't need to order some $65 special double extra oddball socket to fit at least one of the drain plugs.
Is that the first time you changed the oil on the 5075e?
i was teaching a freind how to sevice and change oil in his concrete truck before i got under there he pulled the plug on the hydrolic tank dumped all 20 gallons lol
Still happy with the 5075E? I'm considering one. The video was helpful to see how easy it is to service. Thanks
I have been quite happy with mine. I bought mine with a cab on it. They put in the cheapest radio (Jensen JHD xxxx) and I found a plug and play Jensen JHD 1635BT on Amazon that had am, fm, Bluetooth, Weather, and Sirius for $270. Two Allen bolts and 30 minutes and it was done. Exterior lighting for night use is pretty good front and back. If you want to disconnect the three point quickly, the imatch option is the best $300 you can spend. It runs more than a day on one tank if light duty, and about 6 hours if you are pulling hard (20 gallon tank). The A/C will keep you cool up to about 110 F. Above that, the A/C starts having a hard time keeping it cool, but it is NOT uncomfortable to run that way for hours. I wasn’t going to get the cab option (“too much money, I can work at night on hot days.....”) but am VERY thankful I did get it. I would have had numerous days on the farm where I wouldn’t have worked at all due to the heat without a cab. The rear window opens as well as the two side windows.
My only issue was in day one. After about 2 hours of work, I noticed the three point wasn’t lifting all the way. I got out and saw there was a small puddle of hyd fluid under the cab. The seals on the manifold had blown (I found drips on the trailer that I brought it home with, so it was blown before I picked it up). I called the dealer and she had a service truck out to my farm by 3:15 that afternoon. Not a problem since then. All in all, I love the tractor. Instead if a box blade as part of the package, I swapped it for the Frontier 84” rear blade. I used that to cut my 1600 foot long driveway. Lately, I have been using the tractor to prep my field for grass planting next month.
Good service is key. I tried one at our place after it was in the shop like 6 weeks and it died on me a few days later & ended up sitting there for 2(!) weeks before they came back to get it.
I ended up getting a Massey 4707 and have loved it the past nearly 2 years & 208 hrs. It’s a tad heavier than I need but works great when using the grapple with logs/trees & no rear weight/attachment needed. Also really love the tires..ag like performance yet r4 smooth.
Glad you’ve enjoyed your JD!
By any chance did you use a crush washer with the lug nut for the engine oil? I understand these type of washers are used to stop leakage. Thank you
Lol you said Broxton GA. Less then 10 miles from me
Them special JD Green kid glove "hand panties" are a must have to keep from voiding the warranty. Hehehe! Time to start selling a new line of JD CT3 lingerie in your store???😱
nice job ,, an nice machine
Good morning. What year is your 5057e and what loader do you have? Thanks
We ever going to get a tour of the reloading room, asking for a friend lol
Tim I love to see the inside of your tools. I never had color match John Deere gloves. Do you think I can get Toyota white or Stihl orange gloves? :)
Another great video hand panties is a good one
On my 5075-e can I put a 12.4 front tire or will it hit the frame.
Tim, do you heat your shop?
The frontaxle needs an oil change to !
What cylinder in 5075 e please
Hey Tim what was the stuff in the red can you were spraying?
can you show the lock for the boom ??
Hey Tim i want to get a GoPro to film some of the Logging I do what do you recommend
Thanks for the video.
I’ve got the same stuff to do to my 1 series too.
Hi Tim we have the same tractor on our farm here in tn have u had a problem with yours starting in cold weather
None at all. I let preheat and it cranks right up.
Tim, At what age did you start collecting tools? Thanks for sharing!
Either 9 or 10.
Sometimes i wonder what idiot decides to hide the filters or put 20 things around it. I'm an engineer and it makes me made. In the airplane/jet engine business they have people review the design to see there's any issue in getting to certain critical areas. Anyway how many hours have you racked up in her?
How much money did you save by doing this job by yourself?
Hey friend Greece says hello. What do you do with the oils after changing them, how do you discard them? Thank you in advance!!
How often to you Service you tractor?
I hate the oil filter placement on my new Cat skid steer
How many hours do you have on the John Deere now? It does look like the perfect size tractor for most things. Is it more than 8’ tall?
It is just about 8 feet tall. I parked it in a 9” tall “high cube” shipping container and there was about 6 to 8 inches of clearance above it.
I use starting fulid for cleaning works great less money
Wix make filters for the tractor
Good stuff!!
How about the Deere part number for those gloves : )
Do you have to wear green gloves to work on a john deer? lol
Or Yellow. Either one is fine to service Deere products.
50 hour service?
Do you use a microphone because it sounds like you use one please answer
Yes
Tim, Does the name U TUBE required to be on your clothing?. Jim in Boise Idaho
No
500 hours service?
I think this was to get the break in oil out at 100 hours.
@@cotontop3 ahh ok 100 hours is not bad :) seems to be a good machine so far right?
I haven’t had any problems and it’s almost 3 years old now.
Diesel does not bother me near as bad as 90 wt or the new synthetic gear oil chevrolet uses. They think putting a grape scent in it would help, just made it worse. That crap has to wear off instead of wash off.
I've never heard of rubber gloves being called hand panties lol haha
I live in broxton Georgia and know Napa Brent
👍👍👍
The day I buy a tractor first mod I'm doing is a oil filter relocation mount
What's your snap chat I can't seem to find it ?
Newer equipment they really put filters in hard to reach places;;;;;
Brenton meanders like I said before you can leadem to the water but can’t makem drink I sent him a picture of ssx pads if your picking up what I’m putting down see ya Napa mike
Mike Wawrzkiewic
that's why jd cost so much-they come with a box of gloves
Hand panties…..subscribed!