ADVANCED Blowgun Darts 2024 (Difficulty Level ★★★★★!)
HTML-код
- Опубликовано: 17 окт 2024
- A guide to Poor Man's shooting sport!
The best blow dart cone material, Not an average King of Random paper blow darts. ULTRA HEAVY DUTY Stuff! Waterproof, 'RobinHood' shot resistant! Shows what a cheap PVC Blowgun is capable of! Have been making and shooting Blowguns way back in 2004's as a teenager, so it's time to share the true art of Blowgunning, Take a Deep Breath and Blow Hard!....
Put on your headphones to enjoy the sound clearly. Enjoy the Advanced LED Darts :)
#blowgun #zombiesurvival #archery #bamboo #creative #art #asmr #slingshot
![ARGENTINA vs. BOLIVIA [6-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 10](http://i.ytimg.com/vi/C3wPtKNbAOA/mqdefault.jpg)
This deserves 10mil views... severely underrated!
The crap ones usually get viralled while the genuinely good ones gets buried!
Absolutely 💯
have been pondering about the best way to make durable cones the last few days. My man, you've found the way! Absolutely brilliant
3D printing :)
It’s been known
@@Niriniumpls would break opon impact with concrete what material do you
0:00 DESTRUCTION! ☠☠☠
2:57 HDPE Cone Making 🔥🎯
5:59 Bamboo Darts
7:06 Nail Darts
8:14 Spearhead Darts
9:48 Heat Treatment!🔥🔥🔥
Tracer BlowDart Tutorial!
ruclips.net/video/4BJkZc7UseM/видео.html
Life saver
I love the bamboo darts
Heavily Upgraded Pvc Blowgun:
( ruclips.net/video/_-CHFRGTg9g/видео.html )
Homemade Slockmaster Blowdart:
( ruclips.net/video/hVqqPdJP4fI/видео.html )
Tracer Blowdarts Tutorial
( ruclips.net/video/4BJkZc7UseM/видео.html )
Parachute Blowdart
( ruclips.net/video/ApZt8HO_2D4/видео.html )
Ice Block vs Spearhead Darts
( ruclips.net/video/49ns5vMqIZc/видео.html )
0:00 Total Destruction
2:12 30m Shooting
2:58 Making the Plastic Cones!
5:58 Bamboo Darts Making
7:06 Nail Darts Making
8:13 SPEARHEAD Darts Making
9:47 HEAT TREATMENT!
Nice Darts Brother. Will do mine the same. Question....I made a blowgun out of aluminum, it's 3/4" inside bore. Is that too large?? Should I go down to 1/2" inside bore? Thanks if you reply.
You need 5/8" = .62cal = 15.8mm.
3/4" is indeed too large to build up efficient pressure. I'll always try my best to answer questions, don't worry :) Get a 4' pipe
I've tried 3/4" pvc pipe when I was new to blowguns, indeed not ideal...
This is simply genius!!!
Thank ya, neighbor, for sharing.
Clever way of creating a lot of cones inexpensively!
Thanks:)
Thank’s very much!...you are beautiful!!!
I just purchased a Cold Steel 5 Ft. blowgun...and have been shooting the darts that came with it. I am impressed at the accuracy, but they are quite spendy! This vid was EXACTLY what I was looking for. Do you have a tip on straightening bent bamboo shafts? How about favorite lengths for the various shaft materials? Def gonna try all of these.
13 inches length, diametre 4mm thick bamboo skewers is the best. They are dirt cheap. There's no need to straighten them, just select the most perfect ones from the bunch :)
These large bamboo skewers fly the best as seen in the video. The slimmer lighter ones are only good at 5 metres, farther than that they get blown away by wind.
Coldsteel is the best, I wish to have one too, but can't buy one here without getting ripped off, have to resort to my cheapass PVC.
The darts that came with ColdSteel blowgun are said to be inconsistent in different barrels, just very slight hairline thickness variation in different barrels, dependson your luck, and might result in too loose fit inside the barrel and slide down. Homemade hdpe cones can be precisely customized to fit.
brilliant idea... thanks
These cones will last forever as long as you don't lose them or get Robinhooded by being too good shot!
This is the best blowgun video! Subscribed!!
The best method ever!
Wow!!! Impressive.
Look inside the channel, more amazing stuff in there :)
this guy is ready...
as long as there is wood,nails or regular toothpicks on the planet..
this dude is ready for zombie apocalypse.
Excellent tutorial!
Instead of trimming down the last bit with scissors or knife.. I use sandpaper because it makes it perfectly flat and you end up with a better fit in the pipe
That's a brilliant idea! Thanks.
That accuracy at 30 meters shows how much you have practiced! Very impressive! I have made blowgun darts from milk jugs the way you did but you have taken the skill a step further! I’m hitting subscribe!
Thanks 💀👍
You can check out my more latest uploads too. And yes, hdpe milk jug is the best way at the moment
Nice shooting ! A very interesting method with the plastic jugs. In terms of caliber adaptation, I would suggest using a thin marker pen to mark off the outer cone extension with the cone inserted inside the tube end, and cutting the unwanted extra length using sharp scissors. Using that knife to do so is an accident waiting to happen. Nail tip sharpening is best achieved by cutting off the nail head, inserting the nail in a drill chuck with the drill mounted on a drill press, and using a metal file to shape the nail tip as it rotates inside the drill. Perfect arrow-shape tips guaranteed with this approach.
It's impossible to cut with scissors, the cones are very thick, must be trimmed with knife.
Thanks for your ideas!
Pebble Shooter?!? It's MakoPat. I am so glad to see you here. Between your ideas and LKH9 I am going to make a boat load of .625 cones and harvest some river cane for target and frog gig darts.
Take care, friend.
PS- I am definitely using shears and then sanding down. Hurt my frame hand/arm and just have no strength for knife work outside light kitchen prep.
@@MrPatrick7777 Hi there, hope all is well with you in these strange times. Indeed, I've been messing around with blowguns for a while now...good fun!
@Pebble Shooter I just tried using scissors to trim it as you said, it works REAL GOOD! It just needs a tiny scissors with lots of leverage, so I used my new tiny delicate Chinese scissors. I first mark the line with my knife, then cut along the line carefully. The right tool for the right job! Big scissors don't work on delicate works.
Thanks for your advice! And thanks for the concern of my safety too!
Nice to see the Slingshotforum guys here :)
Best video I’ve seen on how to make your own darts
这个制作过程很棒!👍👍👍😍😍😍
Thanks for the tips on caps! I use a little butane soldering gun that is a heat gun as well, and a carpenter's plum to press out cones. Very light oil on the shaft and some hot glue. After centering and hot gluing, they will come off cleanly if you want for hunting. Good work!
I use a plum as well...
Does the muzzle break silence the pop when the dart exits? I've thought about putting one on mine but I don't know if it would cause the pipe to loose pressure before the dart exits.
This muzzle brake doesn't work because it's diameter is totally different from the 15mm pipe. For it to work, it has to be exaxtly the same size as the blowgun barrel. You think of the same issue as I do, but after I attach an extension barrel on into this "muzzle brake", I purposefully left an opening in the middle of the extension through the existing holes.
The shot still looks powerful. Hopefully reduce the recoil, yes, blowgun has a recoil when you shoot heavy darts. The pipe wobbles! Noticed that in the camera.
This
ruclips.net/video/_-CHFRGTg9g/видео.html
Bravo!
Hello 👋 you are such a great person ❤️ Keep it on. I am looking forward to see more creations in the near future .
You are the Best!
This is the best!
Very sweet darts
Awesome video :-)
Hello LKH9 I enjoyed n learned lots from this 1st, video. I just subscribed. I have to shoot at night n the lit darts are just the thing i care to make, do you have a video for those lit darts? or will you make a new video showing us? Thanks again, great job
Thanks for enjoying my works, there's already a tutorial on the tracer darts. You can buy Bobber lights alternatively. I cannot get Bobber lights, so I used led arrow nocks instead.
ruclips.net/video/4BJkZc7UseM/видео.html
Thanks for responding, so quickly. I will check the link. I hope to see more good videos from your channel. Have a great day.
awesome skills...quenching in oil is better than water. not sure which type of oil tho and the blue part of the flame is the coldest. best to place steel is just after the blue part about 5mm towards the tip.
I also read somewhere that after you heat tip and shape it, then you quench in oil then re heat it and let it air cool.
That hardens it but I'm not sure if that would make it brittle or not.
Thanks. A guy here tells me that these bicycle spokes are not really carbon steel. Therefore the quenching is unnecessary.. by hammering alone already work-hardened them he says. Which I believe is true, a nice experiment anyway! I think you're talking about tempering! By heating to a certain temperature after quenching. Thanks for letting me know the hottest part of the flame, yes!
Carbon steel should produce sparks when abraded hard, didn't watch for that. I've shot nail darts that glided through tile flooring, left a trail of bright sparks! Now that nail dart is carbon steel!
@@LKH9Channel ok thanks
what is the thickness of the bamboo darts? in my area i can find only 3mm.
Pretty slim I can get here, all from China anyway. The thin one = 2mm. Thicker ones = 3mm
Great video
Thank you :)
This is genius!
How long do I have to wait for the hdpe to dry?
Blow with your mouth, it will quickly turn white as you blow air into it.
What diameter of tubing are you using with 30 meter targets?
This
ruclips.net/video/moq6Pqx5fnE/видео.html
Rubber tipped golf tees with bike wheel spokes,hot melt glue,17mm big bore. They hit hard.
You can try mini steel cap nuts
Just a wicked video
👍👍👍
Congratulations, you are a genius!!
Thanks:)
That was strong blowgun... Totally, powerful weapon...I love the glowing one... It look beautiful..!!
This blowgun is hunting grade stuff, designed for maximum damage. I have a specially made video on the tracer darts coming soon :)
@@LKH9Channel No wonder why it's powerful...That's amazing...!!! 👍👍👍
I would love to be able have one of these, but they were made illegal to own or possess
in the UK a few years ago...
Uk has lots of things made illegal, really ridiculous man. If people want to destroy each other, life will find its way. You can ban folding knives, switchblades, yet most crimes are done with common chef knives or machetes. Ridiculous law makers.
Look at China, no guns, but horrifying crimes are done with chef knife, and they dual wield it..
I know...the one thing that cannot be legislated against... Human nature....
Where do you keep your bandages?
Very, very cool!!!! 👍👍👍👍
On the subject of fixating the cones to the shafts, you should also try epoxy putty Milliput. Is very versatile, sticks fine to many materials and once dried, is very light. Cheers!!!
Thanks for your suggestion :)
Was wondering how to make better cones. This seems like it will work so awesome for that. I use 12 and 16 penny nails for my darts. Sometimes a little heavy but nothing an angle grinder can’t take care of
Hey man, I am the one you told to leave a comment. We been chatting a bit on FB😊
Hey man! Subscribed!
Nice work
Why did u put heat treatment on the nail? ( after sharpening the point..)
I was experimenting, but learned that it's useless since bike spoke is not carbon steel, so the cold hammering actually work-hardened it sufficiently!
Nice
Hi there Mr. AC Scott :)
muito bom esses seus moldes, parabéns mesmo 👏🏻👏🏻👏🏻👏🏻👏🏻 vou fazer assim também.
Watch this the latest invention
ruclips.net/video/-2PIb1SvYhg/видео.html
Good stuff little brother. Quite creative
Thanks
wonderful
Nice
What a great video! I really like the way you made the cones. If you used a torch to heat the tip of the spoke
to a bright red you could move the steel more easily. Set each aside as you heat and beat. Once you make
the point by stock removal on each dart heat the tips to red. In dim light watch it turn to oxblood then quench
In water. That will harden the tip a bit and allow sharpening if you were to hunt small critters. Not knowing
the type of steel in the spokes this method will improve the edge holding of the tip even though it may not be
the perfect method to harden and quench. I should add that once you've heated and hammered the points
wide the next heat and quench can be done en mass.Best wishes.
The spokes are too thin to remain red hot when forging the tips, so I just hammered them cold. Yeah, I'm not sure of the type of steel, but after quenching, the tips do feel harder when shooting at hard targets. The sharp tip doesn't deform like common nails do! Low carbon steel can be heated to brighter colour before quenching, like what Cold Steel does to their 1095 carbon steel swords, well, they said it before. Thanks for your detailed comment, you sound passionate about this weaponry stuff! :)
Edit: Yes, it is a must to watch the cherry red temperature before quenching, I purposefully do it at night.
@@LKH9Channel I understand about thin metal cooling rapidly. I've worked bearing race as a knife blade and as I was forging it thin with no plans to do any file work except for the bezel (the edge). The piece air hardened. Another much more experienced smith heard the blue tink on the anvil and growled,
"Don't hit that" just in time. The anvil was also cold. I heated some plate steel short of cheery and laid it on the anvil which acted as a heat sink. With the anvil warm I was able to continue smithing moving the piece from the heat to the anvil quickly. It wasn't even cold in the shop.
That's a nice tip from the experienced blacksmith, I learned something new today.
When he used the nail clippers 🤣
What kind of plastic container are you using? I'm pretty sure I've tried a milk jug before and it didn't work... lol thanks!
HDPE, High Density Polyethylene, is the material of milk jugs. Look for that abbreviation on the bottom of your milk jugs. It should work like mine, maybe you heat it too much until it melt?
Hdpe is white semi translucent if uncoloured. Bleach, shampoo bottles are also hdpe.
Good gracious, you should buy a small anvil or at least use a three lb hammer as one. $7 at Agra supply. Great method of making cones, 👍👍
The Golden Scissors used for this project
ruclips.net/video/pB4XuGyc2nE/видео.html
What type of container did u use for hdpe bamboo dart?
Any bottle made from HDPE I can get :)
@@LKH9Channel I used a milk jug but it was super thin like foil when the cone dried
Try getting thicker hdpe bottles. Thin ones can be good too, easier to cut with scissors. The thick ones like in my video are a pain to cut.
@@LKH9Channel what bottle has thick hdpe
5Litre bottles, the one seen in my video, with a handle. Floor detergent or shampoo bottles. Look for the word 'hdpe' under the bottles.
Asthmatics sobbing in the corner🤣
Awesome 👏 great video subscribed
You are a true genius!!!
Tanks :)
@@LKH9Channel you're welcome!!!
Check this new dart out, with spinning fins
ruclips.net/user/shortsB3RcAuwyNgE?feature=share
Which is better lkh9, tape or the bottle for the cones?and nail dart or bamboo?
If you want durability, hdpe bottles...
Paper + Tape cone is also good, but won't last as long if you shoot a lot like everyday.
I used paper cones for hunting rats 18 years ago because it's cheap and disposable, because rats are filthy....Hdpe cones are reserved for fun target shooting ;)
Darts choice is a matter of preference, I actually like them all! Especially the bike spoke Spearhead darts. You should try them all. Bamboo is fun to shoot and you won't lose them in the outdoor.
@@LKH9Channel I used nail darts and manage to stick it in wood over 100 feet away with duct tape and bamboo kept flying sideways lol, also is if a good idea to cut up a plastic milk carton and make a cone?
@@LKH9Channel what is the most accurate out of bamboo or nail? And which is good for range
You must heat and mold the hdpe for strength and durability. My bamboo darts fly dead straight even over 100feet(30m). Maybe your bamboo skewers are not big enough or not straight. I carefully select each bamboo skewer.
Yes, steel darts is the way to go if you want destruction. Bamboo is the best for range. If only the nail can be combined with the bamboo, that will be perfect! Steel tipped bamboo dart! I'm still figuring that out
How do you make those sick tracer darts, dude? Awesome vid!
I'll show it in future, quite busy.
After a year, still the best blowdart ever made on youtube, cant seem to find any decent blowgun vids. Thanks!
And 100k views is underrated man....
I fix it, but it doesn't work properly, it goes on loading, how can I make it work properly?
What do you mean, too tight in the barrel you mean?
Making Potato Cannon
ruclips.net/video/5nICrDRSkhg/видео.htmlsi=NYF1UXjhCdBL-e2W
Wow!!
Are you in the philippines
I have a question does the hand grip makes it more accurate?
@@RajdeepChakmait's a personal preference, but to be more accurate, a heavy support frame make much more impact to reduce recoil
Awesome tutorial!
Anyone else taken by the beautiful golden pair of scissors?
I discovered that by making several vertical cuts 2-3 mm long around the rim of the cone you can make the cone a little tight in the pipe. The rim collapses a little to allow the dart into the pipe but then it expand when you blow air into the cone. This creates a good seal against the inside of the pipe.
Yes! You just reminded of what I did with paper cones back in 18years ago! Yes, just cut multiple tails, around 1mm apart. Thanks:) I need to make a short video on this! A forgotten blow dart...
This doesn't work with these hdpe cones though, mines are very thick and tough!
@@LKH9Channel Maybe smearing some engine oil into the inner wall of the pipe can increase the friction of the dart. Good air and minimal duct friction increase flight quality
@@LKH9Channel reduce friction
I think silicone based lube will be great. Engine oil is carcinogenic ☠☠☠
You could also try by coating the darts on some candle wax, it should lubricate the barrel while shooting, making it easier to shoot i think.
I've been doing something similar, but better, for over fifty years. First, I make my blow-gun from 1/2" metal conduit. I use a 5 foot piece for the blow-pipe and a 6" section for a die to form my cones. I put the 6" piece into a vice (or anything that will hold it securely). I heat the plastic much the same way this guy did, holding it over the piece of pipe. After the plastic softens, I push a plumb-bob (or whatever conical tool you're using) into the plastic, into the end of the short pipe. You twist the plumb-bob about 1/4 of a turn, it cuts the cap off even with the top of the pipe, and you're done. With a little practice, you can make 250-300 in an hour, already perfectly sized for your blow-gun. I sharpen an 8d nail, stick it through with a drop of hot glue, and it will go through a half-inch piece of plywood.
5 stars from me also my friend, very good job!
Thanks :)
The nails were probably actually stronger after you hammered them and before heat treatment. Nails like that are not really hardenable at all. But cold hammering them work hardened them probably enough to make a difference in holding an edge
Hmm, probably yes. Thanks for the info, since the steel spec is totally unknown. I feel that the tips after heat treatment are harder, they don't deform like normal nails after hitting hard surface like concrete. Not really sure... Got to experiment more.
@@LKH9Channel YOU CAN FEEL THAT WAY, BUT YOU ARE WRONG. they are a mild steel with zinc. hammer hardened is stronger than the flame. besides that, you didnt anneal it first anyways.
Thanks for explaining, I didn't know the type of steel of the bike spoke before
@@LKH9Channel really depends on the brand/date and what not to figure that out. general rule of thumb take it to a grinder lots of sparks high in carbon. (hard steel alloy) low sparks (prolly zinc alloy)
Oh yes, sparks!
Can i use it for fishing?
You need a barbed steel point + string for fishing
Here I learned to make my darts
Really very few people truly learn this art, you're great
this was awsum
Dude, are you in any FB groups or have a FB page? Your videos are really good. Helped me out a lot, thanks man.
Give me your Facebook name, we got a Blowgun group there, I will invite you in
@@LKH9Channel What's the group called?
Can't find your name, join Blowgun Hulks group
@@LKH9Channel I can't find that page anywhere on Facebook? Oh well.
Which type of bottle i make a cone.
HDPE (High Density Polyethylene)
Usually used in milk bottles or shampoo bottles, look for the word "HDPE" underneath the bottles :)
Nice!!! I’d say to insure longevity of the bamboo point add a bit of heat to the points and maybe a bit of beeswax
I learned that fire-hardening is only applicable on wet wood. The reason is 'hardens' the wood is because it instantly dries the moisture on green wood. I need metal points!!
@@LKH9Channel oh ok makes since I see
This is what I'm looking for, thank you.
Glad that it helped :)
@@LKH9Channel Front sighting center How straight you are I want to know how to do it.
@Kemal Güvel you can use shampoo bottles! Look for plastic bottles that is printed HDPE at the bottom. Maybe have a look at recycling centres?
Well thanks. I've been using pvc blowgun since 15 years ago. I just don't like those copycat videos making Grant Thompson "Laser Assisted Blowgun". They don't understand the power and precision of the blowgun as a weapon, simply film something, talk bullshit to rake in views.
Grant Thompson is great, his presentation is excellent! Everyone wants to copy his videos. I totally enjoy watching his Laser Assisted Blowgun as well, just not those copycat videos. RIP Grant.
What bottle did you use to make the darts?
HDPE Bottle. You can use milk bottle, shampoo bottle or yogurt drink bottles. Look at the bottom and you will see the "HDPE" word
@@LKH9Channel thank you
Oh yeah...i forgot to ask what you used for your cone to make the flights? Thanks. Great Vid!
HDPE, better known as "milk jug"
Jajaja que ocurrente hacerlo de embaces de plástico, 10 puntos, genio 😁
I tried making HDPE cone for my alcohol rifle with steel darts but that didn't work that well the reason why is because the the cone either breaks on impact basically dis attaches from the dart or it immediately disattaches from the dart since It leaves the barrel I find cardboard cones much easier to make and more durable in terms of pressure for example the strongest dart gun I have made is a air powered one with bottle pressurized with air from bike pump if the dart can survive a shot into a wooden plank from that gun it's gonna work just fine in the alcohol one when I tested some plastic cone darts with the air gun they broke on instant but whenever I used cardboard glued cones with some tape on too they handled the pressure just fine I'll be from now on making cardboard cones cuz I find that tons easier to make than the plastic cones these ones were nightmare cuz I kept losing ton of plastic just to get one right also I'd like u to try the cardboard cone darts in ur new video I personally used cardboard from old shoe boxes
I've used cardboard cones before, yes, they are good! Will try it again. Nice experience with strong air guns..
But I wonder why they break though, are they too thin? Hdpe is one of the toughest materials on earth..
@@LKH9Channel no it's not that it's just that the connection toward the plastic with the dart is very thin and due to high pressure it slips out of the dart or the glue just fails too Its not big deal tho I can easily make thick cardboard cones from shoe boxes and use tape and glue on them wich will make them work so far I've never had a single dart made of cardboard cone fail me with glue and tape also the darts fly pretty good and accurately too with the alcohol gun unless the dart is not straight only than it will not be accurate or if the cone is glued in a bad way not symetrical way for hunting the cardboard cones work just as good as any other cone they are durable Flexibile the only issue is when they get wet if that happens than better make new cone for that dart so they only lack the ability to use on rainy days but overall I'm happy with it
@@LKH9Channel btw if u don't mind would u try to test the range and accuracy of a cone dart in comparison to a string fluffy type of wadding dart
I've tested them a year ago actually, the fluffy yarn darts are no good for more than 8 metres! More like FluFlu arrows in archery. Cone darts can easily travel 30 metres+
Now I've got a use for the chopsticks I get from the restaurant. Excellent video.
Yes, disposable bamboo chopsticks work too, but needs a metal point. Too thick to penetrate well.
which type of bottle i make cone.
HDPE bottle, shampoo or milk/yogurt bottle is suitable.
Am i used 10 liter water bottle.
Great video! Subbed
Thanks :)
The plastic cones are perfectly done..
ruclips.net/video/i0Q-vquxOoQ/видео.html
Almost perfected here, more different ways to shape the plastic cones
@@LKH9Channel I tried this a couple of years ago and I think I had too much heat. Your vid made it more clear as to what to look for as the plastic heats up. I try again I'm sure..
@@kenamaro3942 well yes, it takes practice. When the plastic becomes transparent, stop the heat immediately, work fast before it cools down and turns back to white.
My tip is, always Move the flame around Non-Stop! This is another video in a few sec.
ruclips.net/user/shortsXYQuC1LI9bI?feature=share
How do you make the led darts? Those are cool too
Made the tutorial since the beginning. You can click my channel and maybe you will find something you like, lots of homemade darts💀👍
ruclips.net/video/4BJkZc7UseM/видео.html
Different led colors demo
ruclips.net/user/shortssm5SrNGaLQk?feature=share
Show.
Good idea I tried I missed a few but it works
It takes practice
Buenas noches quisiera hacer una cervatana
I just bought mine instead... It just seemed like too much work. I'm not much of a DIYer unless it comes to electronicsm. You can get hunting broad head darts fairly cheap also if you don't wanna make the darts. Also you can attach a fishing reel to the bottom and add rod eyelets and attach fishing string to the darts to make a harpoon blow gun. Be sure to put a barb on the dart tho so whatever you shoot doesn't fall off...
Still nicely done tho if you're into DIY stuff. 🙃
We living in Asia have to diy. Coldsteel blowgun is not available and not popular here. Tim Wells also taught you how you make your own if needed.
Also you can read Micheal Janich Breath of Death book, that was way back from the 80s before commercial blowguns appear. We made our own stuff back then.
My channel name is BOWGUN, not blowgun. Another name for a crossbow.
I like blowguns too. Lol
I have a cold steel one
Lol
Not many cats crapping all over your garden I bet?
Incense ash mixed with white pepper wrapped in toilet paper, or Pop firecracker wrapped in toilet paper :) You're right.
RUclips shadowbanned some of my replies to you, unable to tell tales, no more freedom of speech💀👎
Try using it in potato gun spud gun .i think it will definitely maximize the range and power ..or probably destroy that dart
Alcohol Combustion :)
ruclips.net/video/5nICrDRSkhg/видео.htmlsi=NYF1UXjhCdBL-e2W
this is cool thanks for this video - i just got my blowgun its alot of fun in pa state
Enjoy making your own custom darts and enjoy shooting! It's a fun tool.
Hi i am very late but my darts are not powerful enough and flipping halfway like the tip is not going first
Has to do with cone shape alignment and length of the dart.
This is the latest innovation
ruclips.net/video/APGoBz_qP24/видео.html
And this
ruclips.net/video/cMFJv6jzaFs/видео.html
Maybe you can add this rotating fins to your dart
ruclips.net/video/TX1jbtRZ1tU/видео.html
Bro mine just becomes like a pice of plastic cover idk why any tips / help pls
Use this trick
ruclips.net/video/APGoBz_qP24/видео.html
The heavier darts, that you made out of the bicycle wheel's spokes, can perform way better, on a longer blowgun! Have you made a longer blowgun?!!
I got a 1 foot extension that can connect to my muzzle guard. Total length will be 5 feet :) But the place that I shoot is only 6 metres, a 5 footer will be overkill. The glowing darts are actually heavier, those bike spokes are quite light.
I do feel the significant increase in power from the 5 footer!
@@LKH9Channel 5 ft blowgun, is better for open areas that you can find outdoors! The 4 ft has the advantage on less roomy space, like urban enviroments! The weather is getting better, time for some blowgun fun outside!!
And easier to carry in a car. Have fun shooting your 5 footer! :) It's like hangun vs a rifle in comparison
The weather here is getting really hot, hard to film out there without filming myself soaked in sweat!
Can i use Some Plastic From a mineral water bottle?
Those clear plastic bottles never work, use milk / shampoo bottles, look for the word "hdpe" under the bottles.
We have the same process
Watch this, latest improvement with holes drilled in ruclips.net/video/APGoBz_qP24/видео.html
And this, without cone dart
ruclips.net/video/cMFJv6jzaFs/видео.html
What’s the mouth peace made from
Look at the tutorial here
ruclips.net/video/1_jRGWPVVDA/видео.html