Finally......phew. First video, IN A L O N G time.... DECENT , REAL MUSIC - NOT techno - noise. NO talent, there....GOOD BOY ! MATCHES - YOUR CREATIVITY -. (...heres' an idea : Take large nut, with big enough hole, to go over battery terminals. DRILL hole - one of the hex points, until you got a 1/4 inch hole throu to the threads. Take grinder - ( thin wheel ) and grind a V in the ends, of the large nut - opposite both ends of the hole you just drilled . .. Take smaller nut - weld sideways onto top of hole. YOU now have, a self-tightening, terminal, with a PLACE FOR A wire, to go into that slot you just ground. Tighten small bolt, in the smaller nut , which you welded over the drilled hole - into LARGE nut. take care.....ALL
A concept, the 10 millimeter iron grip is not ergonomic, but it is an excellent idea.
Very genius mind
You have a lot of ideas
Good job
Thanks
Muito bom, ideia genial.
🙏❤️
Finally......phew. First video, IN A L O N G time.... DECENT , REAL MUSIC - NOT techno - noise. NO talent, there....GOOD BOY ! MATCHES - YOUR CREATIVITY -. (...heres' an idea :
Take large nut, with big enough hole, to go over battery terminals. DRILL hole - one of the hex points, until you got a 1/4 inch hole throu to the threads. Take grinder - ( thin wheel ) and grind a V in the ends, of the large nut - opposite both ends of the hole you just drilled . .. Take smaller nut - weld sideways onto top of hole. YOU now have, a self-tightening, terminal, with a PLACE FOR A wire, to go into that slot you just ground. Tighten small bolt, in the smaller nut , which you welded over the drilled hole - into LARGE nut. take care.....ALL
Don’t see the point, plenty of tools that can do the same job better