When I started as an apprentice years ago they told me to be careful. Dude said, Plumber mess up might flood the place. Carpenter makes a mistake building might fall down. You F-Up and you might burn that place to the ground. then they sent me to the truck to get the wire stretcher.
Oh the wire stretcher prank. My journeyman got me to call the Project Manager at the shop and ask if the wire stretcher is there. I'll never forget that.
Tip for apprentices you can get a klein multi nut driver that has alot of the sizes mentioned in 1 handle. Also the small termination screwdriver klein has a 4 in 1 so you dont need to carry multiple tiny screwdrivers you will have all the tips you need in 1 handle as well. Klein and milwaukee have nice 13-1 screwdrivers that have torx heads and more importantly square #1 and #2 in one handle. Moral of the story look into the klein multi use handles. Also look into the milwaukee rechargeable headlights and flashlights you will save burning through regular batteries.
I've got a few rechargeable headlights. My phone is usb-c so I just got a Klein that charges with that - so far it's great - but about twice the price of my smaller microusb one from walmart. Theres some things I don't like about it, but it also clips to my (klein) hard hat - overall it's great. None of my lights use replaceable batteries anymore. You can get rechargeable batteries, but they don't last as long, and you gotta deal with the chargers, and a bunch of batteries. I like multi drivers, but I never liked the Kleins. I do REALLY like the little 4 in 1 mini drivers though. For a long time they only had 5/16 nut drivers - 5 in 1 instead of 6 in 1. Also don't like the feel in my hand even though they're great for putting down a lot of torque. I use the Ideal 7 in 1 even though the wire nut thing is kind of a gimmick and can be a dirt collector. I'm not so sure I like the ones where each tip has a flip tip - like the 14 in 1 or whatever. Too much time flipping around trying to find the right bit. I am eyeballing a Klein though - the 15 in 1 classic because I've never liked ratcheting screwdrivers, and it's the only one I can find with good bit storage without a ratchet or other gimmicky stuff that adds weight for no good reason. The multi nut driver ... I'm not sold on those. There's 3 of them starting with a 5 in 1 with 3/16, 1/4, 5/16, 3/8, and 9/16 - skips 7/16, and 1/2" which I use. The 6 in 1 adds 7/16. The 7 in 1 adds 11/32 which I don't remember the last time I used and 1/2" but it's a big heavy clunky thing I don't want to carry or wrap my hand around. Great idea, but I'm holding out for something better. For now I carry driver tips like you use on a drill that I can stick in the 1/4" side of my multi screwdriver.
Great list Dustin! If you guys are working a union apprenticeship, keep in mind that there are approved tool lists that you are expected to keep to. That generally means having everything on the list, but it can also mean leaving some tools at home or packed up. If a tool isn't on the list it means that the contractor is expected to provide it if it is necessary for the job (Power drills are a common example). This can certainly be annoying, especially for folks who just like to have their own stuff and for gear lovers like myself, but it is about maintaining a reasonable expectation and level playing field for what an electrician should have to keep in the tool bag and what a contractor should provide for their laborers to get the job done. If you have a specialized tool you would really like to bring to a job but it isn't on the list and the contractor isn't interested in providing it, run it by an experienced journeyman - they might say its fine to use, or have a simpler solution for the problem you are trying to solve with that tool.
Great explanation. Ibew journeyman here, and there's be plenty of times people have almost come to blows over the tool list. Wanting to get a job done is great, but making sure that line in the sand doesn't get shifted back towards us guys in the field is more important.
That was good timing. Just got onto my first job site and borrowed some tools from the guys who had been working for a few years, but I want to get my own within the next few weeks! Appreciate the list.
@@KinglyMinotaur Eh, I took the entry exam last February and hadn't heard anything back. I eventually just ran into someone at a get together who I didn't even know ran his own business lol, so until I hear anything from the JATC I'm working with him. I'm just getting the basics anyways (not worrying about the drill for at least a month or two); I didn't see a point in buying tools before I even got in somewhere.
I'm two years in and the first year, I'd buy tools every friday (hand tools, bits, smaller stuff) and then put away like 40 bucks every paycheck also if I could to save up for all my power tools. Also spray paint them an outrageous color and it helps from people stealing your tools. For the most part at least. Bit now I have a bunch of tools that I've accumulated over the past two years and journeyman don't ever complain when they know I'm coming to help out, because I'm all set!
The video edit quality is definitely noticeable! The editor and team you have brought on really showing! I love it. Hopefully apprenticeship soon at my local 890!
Holy Cats! I'm not an electrician but I have every one of those items with one tiny exception, my plug tester doesn't have a GFI button. I feel a little more confident now. Thank you!
I carry only what is needed for the task on tool belt. The rest goes in my 5 gallon bucket. What I carry as an apprentice, working new construction EMT: Tape Measure, Two Channellocks, Conduit Reamer, Torpedo Level, Pencil, Screwdriver, Speed Square (for bending kicks), Hole Cutter (or Hole Saw) Material Pouch: Couplings, Connectors, Structural Support: One Hole Straps, Two Piece strap, Minerallacs, Strut Straps. Anchors. TapCon, Wedge. IMC/RMC: See above, not including Conduit Reamer, Speed Square, and structural support. Do include Ear Plugs, Metal File, Angle Finder, No-Dog Level, Speed Wrench, Clean rags because of threading oil, cutting oil, and STL8 means a mess. MC/AC/Flex/LiquidTight-SealTight: Rotosplit, Diagonal Cutters (or MC Cutters), Tin Snips (I prefer Bulldog style) Material Pouch: Connectors, Anti-Short (red devils), 3/8 One Hole Straps. Wire Pulling/ Wire Makeup: Wire Number Labels, Sharpie, Wire Stripper, Screwdriver (Robertson #2 Square). Optional: Linesman (if #10 solids are pulled), Ratcheting Crimper Material Pouch: Wire nuts, Ground Pigtails, Stickybacks, Zip Ties, Plastic Bushing Basket Tray: Mini Bolt Cutter, 9/16 Nut Driver Material Pouch: Tray splicers (3 piece kit), Tray Tie Downs (usually two washers) with spring nuts. PVC/Underground/(Deckwork?): Knee Pads with Belt Buckle, Tape Measure, Ratcheting PVC Cutter or SawZall Blad, Utility Knife Material Pouch: Couplings, Tie wire, Mason String, Red Roll Duct Tape Lights: Contractor should provide green laser level for elevation with plumb laser level for layout on the ground. Mounting Metal JBoxes/Layout Metal JBoxes/KO: Tape Measure, Speed Square, Torpedo Level, SDS Bit Set, Hole Cutter (or Hole Saw), 6 inch bit extender, Nut Driver Bits Material Pouch: Hex Head Tek Screws, Anchors- Hilti KwikHus, TapCon, Wedge Panel Work: Needle Nose, Screwdriver (Robertson #2 Square), Contractor should provide: Cable Cutter, Crimper, Cable Bender, Torque Wrench, Large Zip Ties Romex/Drywall: Tape Measure, Hammer, Jabsaw, Torpedo Level, Paddle Bits Material Pouch: Staples, Connectors, Drywall Anchors: EZ Anchors, Toggle Bolts, etc Energized Buildings: Tic Tracer De-Energized Buildings: Headlamp Tool Bag: Deep Impact SAE 3/8 Socket Set with adapter, Hole Cutter Kit, SDS Bit Set, Folding Allen Set, Milwaukee Right Angle Attachment (49-22-8510),
Bout to graduate my college electrical program. Have experience in only a couple of houses but I have the knowledge and experience to tackle my first year apprenticeship with confidence. Can’t wait to start working.
I've had the Bosch baby 12v drill and impact set since shortly after they came with lithium ion batteries. Both are used a lot and still going strong, even the original batteries. Best $100 or so I've spent in many years of their use, and I'd buy another set if these ever fail.
Great video and that's a good list! Personally I use this tool bag and love it, DEWALT DG5582 Electrical and Maintenance Tool Carrier & Parts Tray, 11 In., 23 Pocket , I can carry most of my everyday tools and an assortment of screws for trim out. Than I have a belt with canvas bag and small leather pouch for a few tools I need with me.
a handful of things i keep in my bag not mentioned here- from a 6 month apprentice. -some skinny knipex needle nose. the klein ones are more robust but dont fit as well in tight gaps. this is especially prevalent when fishing into an existing switch box -a long handled flathead with a fine tip. i run into a lot of tiny flatheads. mostly just on face plates but also in light fixtures where they can be recessed and impossible for an 11 in 1 to access -i keep 8” pieces of 12-2 and 14-2 in my pouch for pigtails
also for your giant flathead, get one with a solid steel core. you’re gonna be hitting your flathead with your hammer a lot. best to get on where the handle wont break
It'll take an hour or more to show & explain everything us contractors should have (use) but to me the answer is everything ..........but a service bag (EDC) for call outs & the whole load out for new electrical construction/systems...I have everything and I'm still buying new tools , ... never enough😎
I'm surprised you don't include an automatic stripping tool, is there a reason why? The one I had was terrible, but I think it was because I didn't spend enough on it. I just spent a week, manually stripping the ends of multistrand wire, and it was such a pain.
Don’t get any phase tapes, just throw black on that chain, if you need them let your lead supply it. Otherwise your lead will take your tapes, and it will drive you crazy. Grab a multi-tool like a 11-1 it will save you in a pinch. If your lead has their own phase tapes then your good. Lead guys love using your tools, just be cautious.
@@ElectricianU is a brand called Readywares. Its a waxed canvas material, very durable, people think its leather. My main issue with a bucket bag is it tips over alot in the van, especially with a drill strapped to the side.
@@donmonarch9549 look for the round stackable bucket trays used to fill them up with screws and nails other heavy fittings on the bottem layers than the lighter fittings made it stable plus i used as a seat just stuck a pce of scrap wood on top like 4 or 5 would fill up to the bottem of pockets on mine
Hi, I myself am an electrician, come from Denmark. Think it's great to see how the electrician profession is in other countries. Seems like it's super powerful hand tool and very different, you lug around on your hips all day. I can look great with 3-5 screwdrivers, a knife, 1 cable scissors, 1 pointed rod and a ruler in the work trousers. I have the rest in my toolbox. In the container. Should you bring your own tools with you from home, if you do, because in that supplement in the salary for it. Decrease the size indication on the conductors even if the conductors get larger. What does an electrician in the United States earn? In Denmark, the earning electrician is approx. Between 32usd and 50usd, of course there are also some it earns more.
well i had to drop my apprenticeship because i had to feed a family they where paying me $5.25 an hour (minimum wage) late 1990's had to buy own tools and pay for my own gas transportation the needed schooling it was costing me money it was like being a starving artist yes over the past few decades im self taught and up to date on most home dwelling codes but not working professionally more of a hobby helping frnds family
Union IBEW journeyman electrician make between $30usd and $75usd, depending on the state. Ibew union electricians are not required to bring any power tools, only hand tools.
I'm 52 years old and recently retired from public safety. I've always had an interest in electrical work. Do you think it would be worth trying to go into that career field this late in life? Would I need to go to school first? There are no tech schools in my area that I know of that focus on being an electrician.
(Third Year Union Apprentice) I've run into 40 and 50-year-old apprentices and helpers out here in SoCal. Great people. I can't speak for them, but from what they've shared it seems worth it based on the benefits, the pay, and fairly steady work depending on where you live. My short answer to the second part is that with just a little bit of learning, I'd say just about anyone can pick up the skills to bend conduit, pull the wire from point A to point B, make-up switches or lighting, etc. RUclips or good books can teach all that. What sets a trade school or jumping into the industry as a "helper" apart is what happens when that switch is flipped. It's all basic construction until there's enough energy flowing through the circuit to kill or seriously harm a person. In my humble opinion, the bare minimum is that a beginning electrician needs a teacher, a journeyperson, or a mentor to learn how to handle that. Good luck.
We have a 60+ yo man in the class. We see it is difficult to him to get the things, we are on level 1, the majority is about 20-30, few have more then 40, but they already work on construction. The electrician career request so many years of practice to consider a professional electrician.
don't know about where your located at but here even the cheapest hands tools Add up over time, buying cheap tools even for an apprentice is not always the best thing, as you really need tools that are going to last past your first paycheck, main thing id like to point out is that not everyone can afford even the basics of hand tools etc when starting out on their first job, my opinion if an employer see value in someone then they should offer to equip potential employees with a basic supply of hand tools, at the very most offer to equip them with a startup bag of the tools they,ll need to do the job/s that they are given, even if its agreed that they pay the employer back for the tools, although i believe that most employers could write them off as a work expense on their tax,
That looks more like a Journeyman tool list. No pump pliers? Green apprentices need a note pad and pencil if they don't wanna get bitched out after forgetting what was told to them 10 minutes.. heck one minute ago.
So newbie question here: why are screwdrivers still so prevalent? Wouldn't it be easier to just carry a ton of 1/4" hex bits with an impact driver? Is it just reaching recessed/tight areas, insulating properties or what? Not trying to be snide, genuinely just curious
Because you will lose all of them and you have a lot more control over the screw so you won't over tighten or strip screws like the one on a panel or a transformer
You forgot the will to want to learn and work and not be lazy .. but I know this video is 2 yrs old . Wish my bro in law was down to work with me he’s smart asf
Hey dustin id love to see a video explaining all the uses of the fluke T5/6. Make fun of me if you want but ive been in the trade a long time and i dont know all the functions.
*Volts AC/DC up 600v *Amps/Current 100 A *Resistance/ohms 1000 *frequency /Hertz *Continuity testing *Open jaw oppose to a clamp *Hold function button *Live voltage ⚡ indicator.......sorry didn't mean to answer for him , I have one in my meter arsenal.
Absolutely, most testers are the same - regardless of the model. I'm about to do one on Klein's models but I'll put this on the list to do the T5 as well. I don't have a t6 yet
Okay I'm going to give you a overview what I just watched I've been into your video for 2 minutes. There are different types of electrical work that you will do as an electrician one as commercial one is industrial one is residential one is maintenance. Basic hand tools a big flat head screwdriver a Phillips head screwdriver a pair of Kline's. A razor knife is nice. In your bag for almost every type of job you will do you need those tools. A tape measure a level a voltage tick a tester tape hey 5/8 and 7/16 nut driver. I like your Skinner but I don't like the skinny part of it I use that as a screw threader cutter a pair of rubber gloves for when you need to work on something hot or stick your hand in something that you're in doubt about. A small pair of channel locks a slightly larger pair o f channel locks. A Keyhole saw and a hacksaw and a flashlight. And a level with a strong magnet. you're putting weight on the side of your hip the more weight you put on the more you're carrying around. you shouldn't have to climb down off of a ladder to pick up a tool you should have that on your hip. In addition to that you should get a carpenter's apron so that you have a place to put wire nuts Staples screws Etc. You need a permanent marker a pencil and a pen. you need a small something to write on. If a piece of conduit is 10 ft long unless you're laying out a house you don't need a 25-foot tape measure on the side of your hip. A multi-tool is nice but the problem with multi tools is it supposed to take the place of another tool. And what happens is you have the other tool and a multi-tool so now you're just carrying more Tools around. you should put in your bag the tools that you expect to be for a given task. My tool bag has a soft belt and a harness that goes around my shoulder it is lightweight and comfortable. I can take it anywhere and I don't have to worry about tools falling out of it. I have many more tools that I keep in my bag and I also have a another bag that I keep a Sawzall a battery drill and bits and Blades. I prefer to have every tool that I keep in my bag and then a backup in my tool bag. without my tools I can't do my job. so if something gets misplaced what good am I?
any tips for how to find work as an apprentice? I have some experience but everywhere i'm applying to never calls back. Also unions are closed due to covid, they aren't accepting new applicants. I live in california 26y.o.
@@nickraffone1598 come on man leave politics out of this type of shit. Obviously he has plenty of opportunities try and comment something helpful instead of bringing your toxic politics
Great list! Only a couple things missing: hammer, level, sheetrock saw. I did get a bit distracted running this vid in 2x speed I may have missed those but he was right about the practicality after all those tools
Aussie sparky here, I have always wondered why you guys don't use insulated screwdrivers all the way to the end of the head? we would not be allowed onsite or told to buy a new set if they were not,j Just curious
We dont here either unless absolutely necessary! you would lose your job on a large scale job if you were found doing this, thanks for the info legend! good to know least they are a bit cheaper haha
one thing you forgot was tin snips (for commercial) I fucking hate it when I get a new guy that doesn't have them, I keep an old pair in my bag for the apprentice to fuck up
Oh hell ya, I don't expect apprentices to have them because it's kind of an oddball tool but we use the shit out of them. I use multiple different angles too. Great tip my friend
Imma pocket warrior... pliers and 11 in 1 in back.. level in back. Everything else I need for the task on the side. Seriously prolongs your body. I used to wear everything in a big Klein pouch. Ended up being too much and really annoying. Once I switched over I never went back!!
look into a five gallon bucket organizer i used to use one with pockets on the outside and inside than there where these round trays with compartments that would stack on top of each other like 6 or 7 would fit inside plus the bucket made for a great saw horse and pipe vise with a cple of shallow cuts and just throw some scrap wood over the top and its a great stool and seat lol
I think totes are better than backpacks, quicker to access and they don't fall over, when you open them, you don't lose stuff in the bottom of the backpack where it's darker.
Dang I’m surprised u have such a cheap level no offense. I can’t stand those cheap ones with the weak magnets always falling off pipe when I’m 30ft up on a lift. And for anyone buying tools get the big Klein Allen wrench tool its only $15 and has all the big sizes you’ll need. Also the Klein rechargeable floodlight/flashlight it’s $40 but will be the best 40 you ever spend. It’s awesome and lasts way longer then those Milwaukee red lithium ones. Everyone on our crew bought one; it’s small, bright, lasts all day and can charge your phone in a pinch.
This is not helping apprentices, this helps low budget electricians. Apprentices should have multitools and save money on must buy and learn how to be more compact unlike buying whole homedepot
Compared to auto mechanics, electricians tools are a bargain even for decent ones. Like $500 would get you set up quite nicely. Don't cheap out. Klein isn't the only good brand out there. Anything with a cutter needs to be hardened steel so you don't notch the blade cutting staples or nails. That is reserved for cutting into live wires which you will almost certainly do at some point. Make sure your tools fit your hand, Those flip out utility knives are cool looking, but some of them are miserable to use when you have to apply any level of force. My preference is a good old fashioned Stanley retractable. There's a reason they are still popular even though their design hasn't changed in a century.
A journeyman only needs one tool:
The apprentice.
A tool, using a, uh tool ...
You’re a savage
Well, just say it...
lol same thing a ebew member needs its the only work they do
Lol
Perfect timing, I literally just got accepted as an apprentice!
Good luck brother! I’m on my 3rd day of class. Love it!!!
Same! I got the job yesterday lol
I hope your experience is better than mine.
"Not a matter of if you get shocked, but when." Also, don't let your foreman disrespect you. Ur not their bitch. Good luck!
2 months on the job myself , good luck man , you’re gonna make mistakes just try to learn from them , stay humble cause it just takes time
When I started as an apprentice years ago they told me to be careful. Dude said, Plumber mess up might flood the place. Carpenter makes a mistake building might fall down. You F-Up and you might burn that place to the ground. then they sent me to the truck to get the wire stretcher.
😂
Oh the wire stretcher prank. My journeyman got me to call the Project Manager at the shop and ask if the wire stretcher is there. I'll never forget that.
I actually got sent all the way back to the shop for a left handed wire bender and a box of ohms.
Tip for apprentices you can get a klein multi nut driver that has alot of the sizes mentioned in 1 handle. Also the small termination screwdriver klein has a 4 in 1 so you dont need to carry multiple tiny screwdrivers you will have all the tips you need in 1 handle as well. Klein and milwaukee have nice 13-1 screwdrivers that have torx heads and more importantly square #1 and #2 in one handle. Moral of the story look into the klein multi use handles. Also look into the milwaukee rechargeable headlights and flashlights you will save burning through regular batteries.
I've got a few rechargeable headlights. My phone is usb-c so I just got a Klein that charges with that - so far it's great - but about twice the price of my smaller microusb one from walmart. Theres some things I don't like about it, but it also clips to my (klein) hard hat - overall it's great. None of my lights use replaceable batteries anymore. You can get rechargeable batteries, but they don't last as long, and you gotta deal with the chargers, and a bunch of batteries.
I like multi drivers, but I never liked the Kleins. I do REALLY like the little 4 in 1 mini drivers though. For a long time they only had 5/16 nut drivers - 5 in 1 instead of 6 in 1. Also don't like the feel in my hand even though they're great for putting down a lot of torque. I use the Ideal 7 in 1 even though the wire nut thing is kind of a gimmick and can be a dirt collector. I'm not so sure I like the ones where each tip has a flip tip - like the 14 in 1 or whatever. Too much time flipping around trying to find the right bit. I am eyeballing a Klein though - the 15 in 1 classic because I've never liked ratcheting screwdrivers, and it's the only one I can find with good bit storage without a ratchet or other gimmicky stuff that adds weight for no good reason.
The multi nut driver ... I'm not sold on those. There's 3 of them starting with a 5 in 1 with 3/16, 1/4, 5/16, 3/8, and 9/16 - skips 7/16, and 1/2" which I use. The 6 in 1 adds 7/16. The 7 in 1 adds 11/32 which I don't remember the last time I used and 1/2" but it's a big heavy clunky thing I don't want to carry or wrap my hand around. Great idea, but I'm holding out for something better. For now I carry driver tips like you use on a drill that I can stick in the 1/4" side of my multi screwdriver.
LOVE the new intro! It's subtle and tasteful and.... it's just great. Nice job Dustin.
Great list Dustin! If you guys are working a union apprenticeship, keep in mind that there are approved tool lists that you are expected to keep to. That generally means having everything on the list, but it can also mean leaving some tools at home or packed up. If a tool isn't on the list it means that the contractor is expected to provide it if it is necessary for the job (Power drills are a common example). This can certainly be annoying, especially for folks who just like to have their own stuff and for gear lovers like myself, but it is about maintaining a reasonable expectation and level playing field for what an electrician should have to keep in the tool bag and what a contractor should provide for their laborers to get the job done. If you have a specialized tool you would really like to bring to a job but it isn't on the list and the contractor isn't interested in providing it, run it by an experienced journeyman - they might say its fine to use, or have a simpler solution for the problem you are trying to solve with that tool.
Great explanation. Ibew journeyman here, and there's be plenty of times people have almost come to blows over the tool list. Wanting to get a job done is great, but making sure that line in the sand doesn't get shifted back towards us guys in the field is more important.
That was good timing. Just got onto my first job site and borrowed some tools from the guys who had been working for a few years, but I want to get my own within the next few weeks! Appreciate the list.
Check your local IBEW. Their apprentices don't need power tools, and their required have tools list is small
@@KinglyMinotaur Eh, I took the entry exam last February and hadn't heard anything back. I eventually just ran into someone at a get together who I didn't even know ran his own business lol, so until I hear anything from the JATC I'm working with him. I'm just getting the basics anyways (not worrying about the drill for at least a month or two); I didn't see a point in buying tools before I even got in somewhere.
I'm two years in and the first year, I'd buy tools every friday (hand tools, bits, smaller stuff) and then put away like 40 bucks every paycheck also if I could to save up for all my power tools. Also spray paint them an outrageous color and it helps from people stealing your tools. For the most part at least. Bit now I have a bunch of tools that I've accumulated over the past two years and journeyman don't ever complain when they know I'm coming to help out, because I'm all set!
Love your videos man!! Have seriously helped tremendously since I started my apprenticeship!!
Love your stuff man. I’ve followed since I went through trade school. You da man!
Thanks for watching my dude!
The video edit quality is definitely noticeable! The editor and team you have brought on really showing! I love it. Hopefully apprenticeship soon at my local 890!
I'm frankly a fan of the Dewalt 6 in 1 driver bit for my impact driver, the convenience is way nice.
Excellent advice Dustin ... Good vid and good trade ... Several thumbs up ...
Torpedo level is a must
Great info!
Great videos! Really enjoy your channel!!! I’m 6 months into my apprenticeship
Badass dude, congrats on getting into the trade! Thanks for watching
I just got accepted into the Wichita chapter! I start Monday!
As a short apprentice I apreciate this
Holy Cats! I'm not an electrician but I have every one of those items with one tiny exception, my plug tester doesn't have a GFI button. I feel a little more confident now. Thank you!
I like the new intro alot!!!! good job and this video is very relevant to me thank you
Thank you and thanks for watching man, glad you get something out of this
What about kneepads?.....For those times you're under the Foreman's desk?
don't forget the lipstick
And a hard hat you don't want to bang your head off the desk
And a 5 gallon bucket of polywater.
Kneepads are actually supper nice when doing plugs.
I carry only what is needed for the task on tool belt. The rest goes in my 5 gallon bucket. What I carry as an apprentice, working new construction
EMT: Tape Measure, Two Channellocks, Conduit Reamer, Torpedo Level, Pencil, Screwdriver, Speed Square (for bending kicks), Hole Cutter (or Hole Saw)
Material Pouch: Couplings, Connectors, Structural Support: One Hole Straps, Two Piece strap, Minerallacs, Strut Straps. Anchors. TapCon, Wedge.
IMC/RMC: See above, not including Conduit Reamer, Speed Square, and structural support. Do include Ear Plugs, Metal File, Angle Finder, No-Dog Level, Speed Wrench, Clean rags because of threading oil, cutting oil, and STL8 means a mess.
MC/AC/Flex/LiquidTight-SealTight: Rotosplit, Diagonal Cutters (or MC Cutters), Tin Snips (I prefer Bulldog style)
Material Pouch: Connectors, Anti-Short (red devils), 3/8 One Hole Straps.
Wire Pulling/ Wire Makeup: Wire Number Labels, Sharpie, Wire Stripper, Screwdriver (Robertson #2 Square). Optional: Linesman (if #10 solids are pulled), Ratcheting Crimper
Material Pouch: Wire nuts, Ground Pigtails, Stickybacks, Zip Ties, Plastic Bushing
Basket Tray: Mini Bolt Cutter, 9/16 Nut Driver
Material Pouch: Tray splicers (3 piece kit), Tray Tie Downs (usually two washers) with spring nuts.
PVC/Underground/(Deckwork?): Knee Pads with Belt Buckle, Tape Measure, Ratcheting PVC Cutter or SawZall Blad, Utility Knife
Material Pouch: Couplings, Tie wire, Mason String, Red Roll Duct Tape
Lights: Contractor should provide green laser level for elevation with plumb laser level for layout on the ground.
Mounting Metal JBoxes/Layout Metal JBoxes/KO: Tape Measure, Speed Square, Torpedo Level, SDS Bit Set, Hole Cutter (or Hole Saw), 6 inch bit extender, Nut Driver Bits
Material Pouch: Hex Head Tek Screws, Anchors- Hilti KwikHus, TapCon, Wedge
Panel Work: Needle Nose, Screwdriver (Robertson #2 Square), Contractor should provide: Cable Cutter, Crimper, Cable Bender, Torque Wrench, Large Zip Ties
Romex/Drywall: Tape Measure, Hammer, Jabsaw, Torpedo Level, Paddle Bits
Material Pouch: Staples, Connectors, Drywall Anchors: EZ Anchors, Toggle Bolts, etc
Energized Buildings: Tic Tracer
De-Energized Buildings: Headlamp
Tool Bag: Deep Impact SAE 3/8 Socket Set with adapter, Hole Cutter Kit, SDS Bit Set, Folding Allen Set, Milwaukee Right Angle Attachment (49-22-8510),
Bout to graduate my college electrical program. Have experience in only a couple of houses but I have the knowledge and experience to tackle my first year apprenticeship with confidence. Can’t wait to start working.
What college did you go to? And what program?
I love the baby drill. I have a bosch equivalent that was gifted by some one teaching me about carpentry. I my favorite power tool!
I've had the Bosch baby 12v drill and impact set since shortly after they came with lithium ion batteries. Both are used a lot and still going strong, even the original batteries.
Best $100 or so I've spent in many years of their use, and I'd buy another set if these ever fail.
@@JasonW. #TEAMBABYBOSCH ja
Starting electricty program soon. Thanks.
I like the multiuser strippers with different holes.
Your information is good and useful
If I can I prefer to use an impact but I do love my Klein hand tools
Any jobsite vids in the pipe? Always cool to see experts at work doing their trade. Helpful to see how other guys do things onsite
Great video and that's a good list! Personally I use this tool bag and love it,
DEWALT DG5582 Electrical and Maintenance Tool Carrier & Parts Tray, 11 In., 23 Pocket , I can carry most of my everyday tools and an assortment of screws for trim out. Than I have a belt with canvas bag and small leather pouch for a few tools I need with me.
a handful of things i keep in my bag not mentioned here- from a 6 month apprentice.
-some skinny knipex needle nose. the klein ones are more robust but dont fit as well in tight gaps. this is especially prevalent when fishing into an existing switch box
-a long handled flathead with a fine tip. i run into a lot of tiny flatheads. mostly just on face plates but also in light fixtures where they can be recessed and impossible for an 11 in 1 to access
-i keep 8” pieces of 12-2 and 14-2 in my pouch for pigtails
also for your giant flathead, get one with a solid steel core. you’re gonna be hitting your flathead with your hammer a lot. best to get on where the handle wont break
It'll take an hour or more to show & explain everything us contractors should have (use) but to me the answer is everything ..........but a service bag (EDC) for call outs & the whole load out for new electrical construction/systems...I have everything and I'm still buying new tools , ... never enough😎
Nice. I need to get a bby 12v for finish work.
This guy's got it covered the only thing I'll add is when you buy wire strippers get ideal brand there way better than klein and I'm a klein tool guy
I'm surprised you don't include an automatic stripping tool, is there a reason why? The one I had was terrible, but I think it was because I didn't spend enough on it. I just spent a week, manually stripping the ends of multistrand wire, and it was such a pain.
Don’t get any phase tapes, just throw black on that chain, if you need them let your lead supply it. Otherwise your lead will take your tapes, and it will drive you crazy. Grab a multi-tool like a 11-1 it will save you in a pinch. If your lead has their own phase tapes then your good. Lead guys love using your tools, just be cautious.
6 months into my apprenticeship, best decision I’ve ever made.
Wait until you find out about what an IBEW apprenticeship is like. You'll jump ship
What company your working for
@@KinglyMinotaur Those are notoriously difficult to get accepted into in some areas of the country.
Nice bucket bag & tool pouch is what I work out of. The black pouch you have is really nice, to expensive for my budget right now.
I've tried the bucket bag but I didn't like it as much. You use the Husky or a different brand?
@@ElectricianU is a brand called Readywares. Its a waxed canvas material, very durable, people think its leather. My main issue with a bucket bag is it tips over alot in the van, especially with a drill strapped to the side.
@@donmonarch9549 look for the round stackable bucket trays used to fill them up with screws and nails other heavy fittings on the bottem layers than the lighter fittings made it stable plus i used as a seat just stuck a pce of scrap wood on top like 4 or 5 would fill up to the bottem of pockets on mine
Can you please do a tutorial for rolling offsets🙏
Needed this video only started apprenticeship 2 months ago have to start buying tools any good tool bags u recommend
Can you please make a video on how do you trace a circuit breaker and the best circuit breaker finder out there. Thanks.
with the belt get some suspenders and find a way to use carabineers or other clips
What brand should I get for a torpedo level?
Do you think we could get an updated version of your everyday carry?
absolutely, i'll add that to the list
@@ElectricianU sweet
Only thing I didn’t like was the Klein voltage tester. They’re the worst. I suggest a fluke voltage meter always on
Hi, I myself am an electrician, come from Denmark.
Think it's great to see how the electrician profession is in other countries.
Seems like it's super powerful hand tool and very different, you lug around on your hips all day.
I can look great with 3-5 screwdrivers, a knife, 1 cable scissors, 1 pointed rod and a ruler in the work trousers.
I have the rest in my toolbox. In the container.
Should you bring your own tools with you from home, if you do, because in that supplement in the salary for it.
Decrease the size indication on the conductors even if the conductors get larger.
What does an electrician in the United States earn?
In Denmark, the earning electrician is approx. Between 32usd and 50usd, of course there are also some it earns more.
well i had to drop my apprenticeship because i had to feed a family they where paying me $5.25 an hour (minimum wage) late 1990's had to buy own tools and pay for my own gas transportation the needed schooling it was costing me money it was like being a starving artist yes over the past few decades im self taught and up to date on most home dwelling codes but not working professionally more of a hobby helping frnds family
Union IBEW journeyman electrician make between $30usd and $75usd, depending on the state. Ibew union electricians are not required to bring any power tools, only hand tools.
Do a video where you measure in the air for accurate conduit run measurements #ElectricianU
I’m taking the aptitude test in a month and will hopefully become an apprentice soon!
Hopefully you've considered the IBEW. 5th year here in Florida making almost $30 an hour. No power tools necessary
@@KinglyMinotaur Actually is the IBEW here in IL. I wouldn’t mind having to use power tools tho
ITS A ROBERTSON HEAD NOT A SQUARE. Great video :)
I mean that's like saying "It's a kleenex not a tissue" or "it's channellock not tongue and grove"
I'm 52 years old and recently retired from public safety. I've always had an interest in electrical work. Do you think it would be worth trying to go into that career field this late in life? Would I need to go to school first? There are no tech schools in my area that I know of that focus on being an electrician.
(Third Year Union Apprentice) I've run into 40 and 50-year-old apprentices and helpers out here in SoCal. Great people. I can't speak for them, but from what they've shared it seems worth it based on the benefits, the pay, and fairly steady work depending on where you live. My short answer to the second part is that with just a little bit of learning, I'd say just about anyone can pick up the skills to bend conduit, pull the wire from point A to point B, make-up switches or lighting, etc. RUclips or good books can teach all that. What sets a trade school or jumping into the industry as a "helper" apart is what happens when that switch is flipped. It's all basic construction until there's enough energy flowing through the circuit to kill or seriously harm a person. In my humble opinion, the bare minimum is that a beginning electrician needs a teacher, a journeyperson, or a mentor to learn how to handle that. Good luck.
Hope you went for it buddy, never to old to learn something new.
Hard work for an old man like you
We have a 60+ yo man in the class. We see it is difficult to him to get the things, we are on level 1, the majority is about 20-30, few have more then 40, but they already work on construction. The electrician career request so many years of practice to consider a professional electrician.
Lock nut wrenches too.
"I like these small strippers."
Can't say I disagree, a small set of strippers is very handy to have.
stay away from the red headed ones. nothing but trouble
don't tell your painter friends, they're always putting their caulk on everything.
How about a broom and a dust pan??
I am looking for an apprenticeship program near Stockton any recommendations?
don't know about where your located at but here even the cheapest hands tools Add up over time, buying cheap tools even for an apprentice is not always the best thing, as you really need tools that are going to last past your first paycheck, main thing id like to point out is that not everyone can afford even the basics of hand tools etc when starting out on their first job, my opinion if an employer see value in someone then they should offer to equip potential employees with a basic supply of hand tools, at the very most offer to equip them with a startup bag of the tools they,ll need to do the job/s that they are given, even if its agreed that they pay the employer back for the tools, although i believe that most employers could write them off as a work expense on their tax,
That looks more like a Journeyman tool list. No pump pliers?
Green apprentices need a note pad and pencil if they don't wanna get bitched out after forgetting what was told to them 10 minutes.. heck one minute ago.
did you say fleshlite? or flash light??
Anyone know of a good leather tool bag for cheap?
So newbie question here: why are screwdrivers still so prevalent? Wouldn't it be easier to just carry a ton of 1/4" hex bits with an impact driver? Is it just reaching recessed/tight areas, insulating properties or what? Not trying to be snide, genuinely just curious
Because you will lose all of them and you have a lot more control over the screw so you won't over tighten or strip screws like the one on a panel or a transformer
Tight spaces is the answer also.
Ahh I getcha. Thanks for the wisdom guys
hoping to get accepted into the IBEW.
those klein bags are like 10 a piece. lol. the 4 pack is is like 35
Wait isn’t this already a video? Btw I love the original vid and the tools featured
You call them "Klein's" my friends calls them "heavies" I call them a hammer....
You forgot the will to want to learn and work and not be lazy .. but I know this video is 2 yrs old . Wish my bro in law was down to work with me he’s smart asf
Excellent video. Just add a hammer. You’ll be nailing allot of boxes and staples
👍👍👍
Hey dustin id love to see a video explaining all the uses of the fluke T5/6. Make fun of me if you want but ive been in the trade a long time and i dont know all the functions.
*Volts AC/DC up 600v
*Amps/Current 100 A
*Resistance/ohms 1000
*frequency /Hertz
*Continuity testing
*Open jaw oppose to a clamp
*Hold function button
*Live voltage ⚡ indicator.......sorry didn't mean to answer for him , I have one in my meter arsenal.
Absolutely, most testers are the same - regardless of the model. I'm about to do one on Klein's models but I'll put this on the list to do the T5 as well. I don't have a t6 yet
I like the small strippers too. Milwaukee makes a nice pair. A reamer is good to have as well.
Use a Milwaukee reamer myself, yeah definitely good to have on you.
What do you recommend for insulated tools if you are starting out?
The only insulated tools worth your life cost thousands. Residential? Just get klein insulated screwdrivers.
@@KinglyMinotaur what brand is that? Klein is the most expensive insulated hand tool.
Okay I'm going to give you a overview what I just watched I've been into your video for 2 minutes. There are different types of electrical work that you will do as an electrician one as commercial one is industrial one is residential one is maintenance. Basic hand tools a big flat head screwdriver a Phillips head screwdriver a pair of Kline's. A razor knife is nice. In your bag for almost every type of job you will do you need those tools. A tape measure a level a voltage tick a tester tape hey 5/8 and 7/16 nut driver. I like your Skinner but I don't like the skinny part of it I use that as a screw threader cutter a pair of rubber gloves for when you need to work on something hot or stick your hand in something that you're in doubt about. A small pair of channel locks a slightly larger pair o f channel locks. A Keyhole saw and a hacksaw and a flashlight. And a level with a strong magnet. you're putting weight on the side of your hip the more weight you put on the more you're carrying around. you shouldn't have to climb down off of a ladder to pick up a tool you should have that on your hip. In addition to that you should get a carpenter's apron so that you have a place to put wire nuts Staples screws Etc. You need a permanent marker a pencil and a pen. you need a small something to write on. If a piece of conduit is 10 ft long unless you're laying out a house you don't need a 25-foot tape measure on the side of your hip. A multi-tool is nice but the problem with multi tools is it supposed to take the place of another tool. And what happens is you have the other tool and a multi-tool so now you're just carrying more Tools around. you should put in your bag the tools that you expect to be for a given task. My tool bag has a soft belt and a harness that goes around my shoulder it is lightweight and comfortable. I can take it anywhere and I don't have to worry about tools falling out of it. I have many more tools that I keep in my bag and I also have a another bag that I keep a Sawzall a battery drill and bits and Blades. I prefer to have every tool that I keep in my bag and then a backup in my tool bag. without my tools I can't do my job. so if something gets misplaced what good am I?
Awe yeah gotta have a stubby.
any tips for how to find work as an apprentice? I have some experience but everywhere i'm applying to never calls back. Also unions are closed due to covid, they aren't accepting new applicants. I live in california 26y.o.
Move out of that POS state
@@nickraffone1598 come on man leave politics out of this type of shit. Obviously he has plenty of opportunities try and comment something helpful instead of bringing your toxic politics
@@unionpepe7864 no he’s right. Move out of that POS state
Great list! Only a couple things missing: hammer, level, sheetrock saw. I did get a bit distracted running this vid in 2x speed I may have missed those but he was right about the practicality after all those tools
Too much weight on tool belt.
Typo!!!
Aussie sparky here, I have always wondered why you guys don't use insulated screwdrivers all the way to the end of the head? we would not be allowed onsite or told to buy a new set if they were not,j Just curious
Usually we don't work hot.. Unless really necessary. So it's kinda standard to not expect them. Wouldn't hurt the trade to do it tho
We dont here either unless absolutely necessary! you would lose your job on a large scale job if you were found doing this, thanks for the info legend! good to know least they are a bit cheaper haha
So heavy!!!! Haha
one thing you forgot was tin snips (for commercial)
I fucking hate it when I get a new guy that doesn't have them, I keep an old pair in my bag for the apprentice to fuck up
Oh hell ya, I don't expect apprentices to have them because it's kind of an oddball tool but we use the shit out of them. I use multiple different angles too. Great tip my friend
What kind of tool pouch is the black one
An expensive one.
it looks like a klein
Was expecting a hammer in that bag lol
Are there electricians that actually wear their tool pouch? I have a tool pouch but I would never wear it.
Anyone know any good apprenticeships ? Just got my ET card trying to get started on the journey. I'm located in southern California
I don't mind traveling
I've been working as an apprentice I think I'm going to start using a backpack and a pouch... I get yelled at for carrying too much or not enough 🤣
Imma pocket warrior... pliers and 11 in 1 in back.. level in back. Everything else I need for the task on the side. Seriously prolongs your body. I used to wear everything in a big Klein pouch. Ended up being too much and really annoying. Once I switched over I never went back!!
@@camerondeceglie7447 lmao, give me Kleins a 11-1 and a beater, I’ll eyeball to make sure it’s level, everything else you better call an electrician
look into a five gallon bucket organizer i used to use one with pockets on the outside and inside than there where these round trays with compartments that would stack on top of each other like 6 or 7 would fit inside plus the bucket made for a great saw horse and pipe vise with a cple of shallow cuts and just throw some scrap wood over the top and its a great stool and seat lol
I think totes are better than backpacks, quicker to access and they don't fall over, when you open them, you don't lose stuff in the bottom of the backpack where it's darker.
Any decent employer will supply bits and blades that wear out
Electician ?
whats the model name of the tester?
Links are in the description
@@ElectricianU thank u
3rd
Live wire👀
I believe it's called a Chicken Stick
Tick tracer
Dang I’m surprised u have such a cheap level no offense. I can’t stand those cheap ones with the weak magnets always falling off pipe when I’m 30ft up on a lift. And for anyone buying tools get the big Klein Allen wrench tool its only $15 and has all the big sizes you’ll need. Also the Klein rechargeable floodlight/flashlight it’s $40 but will be the best 40 you ever spend. It’s awesome and lasts way longer then those Milwaukee red lithium ones. Everyone on our crew bought one; it’s small, bright, lasts all day and can charge your phone in a pinch.
😰 This is just what apprentices use, how much more do journeymen use?
SDS, Lasers, Large levels, KO punch, hole saws, oscillating tools are nice to have for cabinets, band saw, sawall, sockets, allens.
@@ElectricumViridis Guess I better start saving then.
Do you know any electrician in Canada as I want to be apprentice electrician. I have no connection here.
what city u from
@@amunbinning8333 I'm in Toronto
@@diytej2461 try kijiji and indeed
@@diytej2461 thats how i got my first
@@diytej2461 im from pickering
4th☹️
This is not helping apprentices, this helps low budget electricians. Apprentices should have multitools and save money on must buy and learn how to be more compact unlike buying whole homedepot
You forgot pencil and hammer I like the ideal stripper.
Thumbs up for the ideal write stripper all I ever use
2nd
Going for my CT test soon 😬 I gotta really study more I just have no drive to open a damn book lol
This is a re upload
Compared to auto mechanics, electricians tools are a bargain even for decent ones. Like $500 would get you set up quite nicely. Don't cheap out. Klein isn't the only good brand out there. Anything with a cutter needs to be hardened steel so you don't notch the blade cutting staples or nails. That is reserved for cutting into live wires which you will almost certainly do at some point. Make sure your tools fit your hand, Those flip out utility knives are cool looking, but some of them are miserable to use when you have to apply any level of force. My preference is a good old fashioned Stanley retractable. There's a reason they are still popular even though their design hasn't changed in a century.
Forgot a brain