Thank you so much mate! You showed up the whole process very clearly and after following all the steps I finally has been able to install update. You are my savior, Sir
Yes, it should work.. Use this firmware >www.sony-asia.com/electronics/support/televisions-projectors-lcd-tvs-android-/kd-65x8500e/downloads Note that it has 3 different firmware (Hong kong, Thaiwan and Asia pacific) for different regions. Select correct one based on your region.
@@tech-corner2556 I have followed the instructions in the video, sir, but every 5 minutes it turns off. I have to start from the beginning again, why? Is there something wrong?
What a great tutorial and experience sharing. Thank you. I have a KDL-50W800C do boot looping up to SONY logo. I plan to change the eMMC chip, then install the FW through USB. Will it work?
Thats fantastic. My Sony KD55X8000H mainboard is probably not working. So I can try using KD65X8000H or 75X8000H right? As long as the size is bigger than 55 & the latter part (8000H) is the same?
Hi I have KD-65x9000f. 1-983-249-11 motherboard gone. i replaced with 55'' motherboard 1-983-249-31. I installed firmware v6 7220. after installation sound is there multi colour light blinking and led s not working. But I can see screen working through the black screen. What could be the issue.
Hi, thank you for sharing your experience. I have model KDL-55W850C and main board is dead. I have a chance to get another one from KDL-50W807C and also from KDL-55W755C. Do you think these board will fit? I am asking because you said you have experience with KDL-65W850C/KDL-75W850C. Which boards you used in your case? Big thanks!
Hello, thank you very much for such a clear video. I have a Sony XBR-75X850D (I am in the US). The screen is perfect, but the HDMI ports are not working, (this happened after a storm). I am able to stream perfectly using the internal smart tv app, but receive the “No Signal. Check the external input or select another input using the INPUT button”. Do you think replacement of the main board will fix the HDMI ports? Thank you. Chet
Motherboard replace karneke baad tv Directly chalu nhi hota kya, firmware install bhi chalu hoga kya or if motherboard 2nd replace karne par bhi firmware daalna hoga ya aisehi tv start hojaygi
Sorry to ask again , i already change the mainboard and like u said the board is blinking green and orange which means the board is ok but when i try to update its blinking white only for around 10 minutes and its blinking green and orange but this time there is a music appear but still no picture and when i saw your video the firmware only 300 mb , i think its an old firmware ,where can i get your firmware cause from the sony website firmware around 1.6 gb thank you
thank you very much, with this video my problem was solved, replace the mainboard 65x8500 with 49x8500❤
Thank you so much mate! You showed up the whole process very clearly and after following all the steps I finally has been able to install update. You are my savior, Sir
What if the KD-65X8500E main board is replaced with the KD-75X8500E main board? is it same ? as explained in this video.
Yes, it should work.. Use this firmware >www.sony-asia.com/electronics/support/televisions-projectors-lcd-tvs-android-/kd-65x8500e/downloads
Note that it has 3 different firmware (Hong kong, Thaiwan and Asia pacific) for different regions. Select correct one based on your region.
@@tech-corner2556 I have followed the instructions in the video, sir, but every 5 minutes it turns off. I have to start from the beginning again, why? Is there something wrong?
sorry, it turns out my flash disk was the problem, it worked... thank you... always successful
@@atlantic4013 Great to hear that you were able to do that..!
And if your in Canada what region would I choose?
What a great tutorial and experience sharing. Thank you. I have a KDL-50W800C do boot looping up to SONY logo. I plan to change the eMMC chip, then install the FW through USB. Will it work?
can you still do a install if the unit goes into boot loop ?
Will the serial number change if I replaced the motherboard ？
What if mainboard kd 65x8500e i change to kd55 x8500f Thank you for answering Sir
It is not possible. Don't try that..
@@tech-corner2556 thank you ,👍
How much grant it may be 100 not working or screen deem
Thats fantastic. My Sony KD55X8000H mainboard is probably not working. So I can try using KD65X8000H or 75X8000H right? As long as the size is bigger than 55 & the latter part (8000H) is the same?
Hi I have KD-65x9000f. 1-983-249-11 motherboard gone. i replaced with 55'' motherboard 1-983-249-31. I installed firmware v6 7220. after installation sound is there multi colour light blinking and led s not working. But I can see screen working through the black screen. What could be the issue.
Hi, thank you for sharing your experience. I have model KDL-55W850C and main board is dead. I have a chance to get another one from KDL-50W807C and also from KDL-55W755C. Do you think these board will fit? I am asking because you said you have experience with KDL-65W850C/KDL-75W850C. Which boards you used in your case? Big thanks!
Hello, thank you very much for such a clear video. I have a Sony XBR-75X850D (I am in the US). The screen is perfect, but the HDMI ports are not working, (this happened after a storm). I am able to stream perfectly using the internal smart tv app, but receive the “No Signal. Check the external input or select another input using the INPUT button”. Do you think replacement of the main board will fix the HDMI ports? Thank you. Chet
Is there a possibilty of buying the T-con board as well?
Motherboard replace karneke baad tv Directly chalu nhi hota kya, firmware install bhi chalu hoga kya or if motherboard 2nd replace karne par bhi firmware daalna hoga ya aisehi tv start hojaygi
Why the firmware file size changed from 1.6GB to 300MB? Something's not right here
Thank you .. if i change display size I need upload framware to new MB is this right ?
Dear sir,
I'm trying to get KD-65X9000C Asia pacific firmware from the sony but it shows " Terminated" any solution for this.
Many thanks.
Where can I purchase a mother board? If available could purchase off you.
Sorry to ask again , i already change the mainboard and like u said the board is blinking green and orange which means the board is ok but when i try to update its blinking white only for around 10 minutes and its blinking green and orange but this time there is a music appear but still no picture and when i saw your video the firmware only 300 mb , i think its an old firmware ,where can i get your firmware cause from the sony website firmware around 1.6 gb thank you
Do how did you get the firmware?
I have the same TV that doesnt not turn on, how do i diagnose if its a MB or Power Board problem?
99% of the time it's the main board. I've had two different Sony Bravia models die after 6-7 years and changing the main board fixed them.
Thaks you❤❤❤
If you are in Australia I could pay in AUD through the bank or handover you the cash. The TV is in Srilanka and Im visiting Austrlalia in a few days.