Lidl glider RC modification with folding propeller
HTML-код
- Опубликовано: 19 июн 2024
- The Lidl glider, very popular for it's low price and huge wingspan, sold as a free flight glider for kids, it's perfect to convert it into an RC glider since there's a lot of space in the fuselage to put the electronics and a big enough battery.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Recommended components.
Microservos: bit.ly/2LZMaxb
Microreceiver: bit.ly/2VdweID
Brushless motor: bit.ly/2Y7PM6U (Aguanta
**Use 2S batteries for this motor.
folding propeller: bit.ly/2Y0JdyP
Flysky radio: bit.ly/2vQBdVw
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Subscribe:
goo.gl/zKQ706
Instagram
/ joyplanes
List of equipment I use
Cameras
Sony a6300 amzn.to/2SrtciJ
Canon T5i amzn.to/2SrtciJ
Gopro amzn.to/2ECcDwW
Osmo pocket amzn.to/2IDO8mR
Sound
Zoom H1 amzn.to/2SzhOBy
Zoom H5 (clearer sound) amzn.to/2EAG6Hk
Microphone OLM-10 amzn.to/2EmLcFM
Lighting
LED amzn.to/2tHk5AA
LED ring amzn.to/2SrJvMo
Accessories
Tripod 1 amzn.to/2Svufhm
Tripod 2 amzn.to/2SrtUfT
#JoyplanesRC #HobbyRC 
Хобби
great modification i have two gliders still in the box just trying to work out the best electronics to use ie motor esc
Thats lovely! Nice to watch!
efforts given triumph.good project for new rc diy flyers.thank you sir.
Keep the dihedral!!! That’s what I would do.
Nice light weight conversion.
Nice job!
Super i must buy one of this seen many builds now. 😀
Nice work 👍
Same basic set-up. Full Micro 4 channel, thr,elv,rud,ail. I used both a Cox .049 reed & .051 TeeDee port timed. .049 mid range in speed. 8 minute flight times.
The TeeDee powered is a screamer, Fully Aerobatic. 5 minute flights.
Hi, nice job.
How did you manage to fix the propeller to the engine?
It does not have a locking screw.
And what battery did you use?
Greetings from northern Italy.
Good job 👍🏻
Very good video, in making this glider is not required ESC ...?
Great video. This exact model can be bought at K-mart in Australia for 10 AUD. (May 2022), and I am in the process converting one myself. I am hoping to do it as a 2 channel keeping the dihedral without motor, and later add motor and maybe ailerons.
If you don't want to do crazy aerobatics with it Tom, you just put the ailerons on the outer sections of the wings in as far as the dihedral bend. We also made them into twin motor cruisers with salvaged motors/ESCs from scrapped quads mounted on thin aluminium angle screwed onto plastic wall plugs glued through the wings.These mounts sit flush with the bottom of the wings and can be bent down slightly as required. So no torque roll and the thrust line goes pretty well straight through the wing. They fly beautifully on 3s and a Byme-A stabilizer.
♥️love videos like this!
NICE!
Great video. Thank you! Just a silly question, you didn’t list a link to buy an ECS in the description. Is an ECS required? Could you help with a diagram or link on how to wire the parts together?
Without ESC no brushless motor I guess
What does it weight? I Build one as a Glider without motor, at 180g.
I wonder what is the moter KV. 2000 or 3800?
Mine has fiberglass top and bottom spurs Followed by carbon fiber cloth and fiberglass vacuum bag I took it dynamic soaring if you know what that is and got it to 165 miles an hour....Weighs 6 kg.
Man this is awesome I’m subscribed! Btw that place is amazing can I ask where it is?
It's in Howth Ireland.
wahou!! beautiful chemtrail on the sky ........
hello sir I have a question I saw your fly sky apparatus what receiver and engine you used
You can get them at action markt in the Netherlands and Germany for 2 bucks
Que bien. Buen trabajo. Ayuda por favor construi uno igual Pero Bimotor y un poco mas grande pero ocupa casi el 100 % de potencia y ocasiona que a los pocos minutos como 5 se sobrecalienta alguno de los dos motores y se quema, ya van 2 veces que se queman.tienen 1 speed control cada motor. Que los motores no estan diseñado para 3 celdas? Motor que uso 1806 2208kv MARKS o sera que son de baja calidad? MIL GRACIAS
Super
great (y)
Hi! Nice project...what' s the ESC used for this motor?
thqnk you ;)
It's a 30A ESC for drone racing but modified with a Buck converter to energize the receiver with 5v
Hi, nice work!
The motor have some down thrust and right?!
Yes, down thrust mostly.
Very nice bro ! 2 questions though
What type of glue to use ?
Do you really need to flatten the dihaderal ?
The glue is the gorilla CA glue and for a servo I used hot glue, the dihedral needs to be flat in order for the aileron to work.
@@Joyplanes i think smaller ailerons might have worked well !
@@Joyplanes can you tell me the prop type used on this glider ? Thanks in advance
@@F139 look in the description for folding propeller
@@Joyplanes thanks bro! Nice work
wow
You dont need to modify the elevator, just mix flaps and ailerons.
How do you do that
That slope looks like a good soaring spot for paragliders. What place is that?
Howth Ireland. Down there is only water, so I'm not sure if it's safe to fly there.
@@Joyplanes Haha, yes you need a backup to land. So it is not a suitable spot, it looks really sweet though. You can be lucky to live there.
@@centaurixon I have to drive about 40 min to get there though.
Я сделал вполне бюджетный вариант.
С воздушки PCP завалил ворону. На столе её расправил в положение полёта вверх лапами. Размах получился 58 см. Сушил долго.... Месяц. Воняла ссука сильно первые две недели. К лапам приделал колёсики 40 мм. Мотор 2205 посадил на моторамку в клюв. Благо клюв позволяет. . Литий 2 банки. Вес получился 390 грамм. Летает стабильно. Сейчас хочу убить вОрона. У него размах до 70 см можно получить. В идеале конечно лучше цаплю использовать - из неё можно дальнолета до 10 км хорошего сделать🤔👍. Такие вот дела.
Can I use a 2212 or 2208 motor and 3S battery?
Yes. It will go faster with that setup.
Was 1811 motor powerful enough??
Yes. And this is a glider so I just need it to climb a bit and then glide. The motor and propeller were ok for this plane.
Could I use a 11.1v lipo 2200mAh battery ?
No. That battery would be really heavy for this glider. You should use a 300 or 600 mAh battery.
I am trying to put together a short video to try and find a suitable site close to where I live. Would you be kind enough to give me permission to use parts of your excelenent video (Lidl glider RC modification with folding propeller) for local viewing? It would be much appreciated. Thank you for your hard work.
if you live in dublin greystones or dalkey sum great slopes ya man never replys ???
Please provide the details about the electronic...
There it is. I forgot to put it before. Cheers.
@@Joyplanes Thanks, bro.
👍👍👍👏👏👏👏
Always fly over long grass to save light planes from major crash damage. Lol
I do that with my 2.5m wingspan glider.
Hi you said you would have a link to parts can you post it thanks again, looking forward to making my lidi glider RC
Please please please tell me the flight time of this plane.
Only gliding it could fly for a long time, something like 1 hour, but if you use the motor all the time it can only fly about 15 min or a bit less.
Very cool! U make it look easy.
hello, can you give us the references of the engine, the propeller, the battery, and the controller? thank you
Would someone please sell this in the USA? They only sell junky styrofoam models and tiny EPO's here.
Oh no! Why not attatch the motor so that there's just a little gap between fuselage and spinner. It hurts my soul & eyes. The rest was nice and clean.
Who needs rudder, right?
Hey joy saludos desde sevilla te paso un video de una version del Lidl Glider (alita) que hice hace unos meses, espero que te guste si necesitas info con gusto te doy detalles, un fuerte abrazo y gracias por tus videos que animan a mucha gente a introducirse a nuestro increible hobby
ruclips.net/video/faPIEYW435E/видео.html
Get a sharp blade for god sake
Sorry bud but this is one of the worst conventions I ever seen. You can do it way cleaner and faster, but then again it's just me!!!
Please show us HOW!! ..... thankyou.
if ya don’t like it dont watch
You should build a so called Newflidl.
Search on RUclips for: "Flybrei Newflidl 150km/h"