Magaling na technician yan si candido, mahusay pulido gumawa, yung TV Kong Samsung nagawan nya ng paraan upang magawa, pinag iisipan hnd hula hula lng. Highly recommend at super bait pa.
thank you sir!!! my tv (sony bravia 65-kdx7500d) 65 inches is now working fine. no more flickering!! but i suggest to all of you guys not to do it youself, unless you have a background in electronics. seek professional help as referred by sir candido. salute sayo sir candido.
I have also a KD65XE7005 with this problem and will maybe try that solution also. So taping pin 1+2 of left ribbons right side, thats it ? Would apreciate your answer. Thank you
Napakaswerte niyo pong binayayaan kayo ni god ng ganyang talento di po biro ang pagrepair ng tv lalo nat masisilan ang mga board nayan pagnagkamali ng hinang lahat damay2x po at sakit sa ulo pa pag nagkataon kay goodjob sir im salute you
Napakagaling nyo po gumawa ng mga ganyan machine continue lang po sa inyong vloging sending my full support to your channel keep safe po sir godbless po stay connected lang po
Hi ka tech salamat po sa video mo yun sa tv na ginagawa mo po same sa tv na gingawa ko po ginaya ko po yun technic nyo ngyon ok na po yun tv na sony 65 inch
Pati pala double image makuha sa tape method, akala ko tuli lang ang remedyo, maraming salamat sa video mo sir, alam kuna ngayon kung anong gagawin ko pag may may encounter akong ganyang trouble
Thank you for this video, it helps a lot. I have flickering screen start after minutes ( not at the start ) I will try your directions and hope solve the problem.. Thanks again for sharing
@Younes Sleibi thank you for this comment and thank you for watching...there are two white ribbon (1) RIBBON ONE OR LEFT RIBBON (2) RIBBON TWO OR RIGHT RIBBON and there are four main tape placement location 1) RIGHT SIDE OF THE LEFT RIBBON 2) LEFT SIDE OF THE RIGHT RIBBON 3)LEFT SIDE OF THE LEFT RIBBON 4)RIGHT SIDE OF THE RIGHT RIBBON you can use 2-15 or 2-13 first two pin no cover pin 3 to pin 15 cover by tape
@kamran karbasi thank you for this comment...it is in the video I need to play that video if i have time,so I can say how many lines covered ,the video is my only reference record.
@joelgavotto6519 thank you for this question and thank you for watching...tape method solution for flickering double image problem on led tv have no exact pin location to be covered by tape flickering double image problem exist when any of the lcd's tft component won't work properly it could be connected in different pin location so to emitate my pin taping in my video has no guarantee that you can solve the flickering double image problem, my video only give idea that the flickering double image problem can be fix by tape method either putting the tape from left ribbon or from the right ribbon you can see in my video where I put the tape that solved the problem if ever you reflecate my pin placement and still no success even you place the tape in any pin location it only mean the lcd problem of your tv is unrepairable remember tape method repair only has 70percent success rate if you're a legitimate led tv technician but if you're not a technician the failure rate is 70 percent ,my video will give only idea how to solved the problem to all technician who didn't encounter this kind of trouble...my video also give idea to all tv owner that the problem flickering double image can be fix by tape method instead of replacing the whole lcd panel.
@@CandidoMembrebe Thank you for your reply and I fully understand that your method may not work. But on which pins should I put the adhesive tape? If I have this information, I could do some tests on the tapes.
@@joelgavotto6519there are two white ribbon left ribbon or ribbon 1...right ribbon or ribbon 2., try to tape pin 3 to pin 12 from the right side of the left ribbon if no luck transfer to ribbon 2 or right ribbon try to tape pin 3 to pin 12 from the left side of the right ribbon.
@@CandidoMembrebe Thank you for your reply. I've found a solution similar to yours here ruclips.net/video/n8FWBTZ-fdw/видео.html, but it's the same TV model except for the size. It works but I think the red colour is different. I'll try your positioning to see if there are any improvements. Thanks again for your help
Hello good day sir! Im faroq from Malaysia. I have 2 problems with my sony kd65x7000E First one my tv cannot switch on. But I already solve, as I replace the power supply board. Second one is the flickering image. Mind to share which pin you cover at the ribbon connecting to tcon board ? Really appreciate if you can help me. Thankyou
@Faroqpazli thank you for this important question and thank you for watching....take note your 65 inches SONY BRAVIA has 2 ribbon Ribbon 1 or left ribbon...ribbon 2 or right ribbon try to place the tape using 3-15 pin 1 and pin 2 no cover pin 3 to pin 15 covered by tape place it at the left side of the right riboon if no luck place it in the right side of the right riboon if no luck place it to the right side of the left ribbon if no luck place it to the left side of the left ribbon that's all
@torstensawatzki5189 if your Sony tv is the same parts to my 65 Sony Bravia in the video so you can get better idea in the video than any written or verbal explaination ,like what I did when I have customer 65 inches Sony Bravia I just play this video and watch it and follow where I put the tape.
@vincentallan1810 Thank you for this question and thank you for watching..this video's lcd problem is light minor lcd issue that's why the resolution is good almost no different from original resolution...there are lcd issues like this that after repair you can see the different like left side or right side color right side or left side linearity it's visible video quality decrease.
Take note there are 2 ribbon ribbon 1 is the left ribbon ribbon 2 is the right ribbon, one ribbon has two side left side and right side....you can try at the right side of the ribbon 1...... 2pins no cover pin 3 to pin 17 cover by tape if no luck go to ribbon 2 at the left side 2 pins no COVER pin 3 to pin 17 covered by tape this is called tape placement code 2-15 ...two pins no COVER pin three to pin 17 covered by tape you can also use code 1-14 or code 0-13
My tv sony bravia xr-55X90j has the same problem. I have covered Number 3 to 16. But now i have faded color at the right side. Which pin I need to cover for my TV’s double image problem??
Thank you for this question my video is the best instructions nowadays every time I encountered flickering lines problem of a Sony Bravia I just play and watch my video,,one purpose of why I recorded and upload my video is to a ready guide whenever I encountered such flickering problem so just watch till end of the video to guide you the problem if your tv is not same model of my video you need to call a tv technician to fix your tv because my video is intended primarily for the technicians who never encounter such problem technician can easily follow my video.
Hi Sir, I have flickering screen start only after few minutes tv On (Model : Sony KD-49X7000E). please advise which ribbon & numbers to cover with tape. Thank you.
@Boby G thank you for this important question and thank you for watching..I haven't recorded a flickering repair video for Sony Bravia kd-49x7000e....I can only give you a idea make sure your also a tv technician since all of the video is more on idea....have you noticed there are 2 white ribbon ribbon 1) or left ribbon ribbon 2) or right ribbon try to cover pin 2 to pin 13 at the left side of the left ribbon if no luck try to cover pin 2 to pin 13 at the right side of the left ribbon if no luck go to the right ribbon same procedure.
Kuya master Technician here baguhan palang po Ganyan din po tv ko Kaya lang washout ung kalahati , yung kalahati ng flickering tapos now nagbiblink na ungbrednindicator niya. Magagawa pa kaya to Master. Salamat po Pashout out naman po ako sa Nxt video mopo.
Thank you @ RMG MUSIC TV sa comment na ito at thank you din sa panonood mabuti nyan pa check nyo sa technician malapit sa lugar nyo ng malaman kung repairable pa iba kc kung ma actual check up
@Jay Flores thank you for this question and thank you for watching itong video lang na ito ang pinaka record ko pag may tangap ako na ganito rin ang problema peneplay ko lang ang video ko na ito para bilangin kung ilan pin ang tinakpan ko pwede nyo rin naman tingnan sa video ko na ito kung ilan pin dahil klaro naman lage nyo tandaan na idea lang po ang makukuha nyo sa video na ito yan naman talaga ang dapat dahil para naman may mag aaral pa sa mga technical school
Opo lcd pa rin ,usually kung may vertical line or horizontal lines sira lcd minsan nagagawa pa by tape Method pero karamihan hindi na magawa maliban kang kung papalitan ng lcd
Yes considering most of lines on screen and flicker problem is due to defective lcd not all can be fix by tape method some of those problem need lcd replacement it happen to me out of 10 only 7 have been fixed the 3 replace lcd panel.
Salamat po sa panood tingnan nyo po ng maigi ang video dahil kaya ko rin bina vlog ang mga gawa ko para pag may gagawin ako mayron na akong guide pe play ko lang video ko may kodigo na ako
@Ellaine Sibunga thank you for this important question and thank you for watching...refer to 09208132026...09053993997 again thank you and God bless...
Magaling na technician yan si candido, mahusay pulido gumawa, yung TV Kong Samsung nagawan nya ng paraan upang magawa, pinag iisipan hnd hula hula lng. Highly recommend at super bait pa.
Maraming salamat po sir sa nakakataba ng Pusong commento nyo at maraming salamat po sa tiwala at panonood ng video ko God bless...
thank you sir!!! my tv (sony bravia 65-kdx7500d) 65 inches is now working fine. no more flickering!! but i suggest to all of you guys not to do it youself, unless you have a background in electronics. seek professional help as referred by sir candido.
salute sayo sir candido.
Thank you for this very encouraging comment and thank you for watching.
I have also a KD65XE7005 with this problem and will maybe try that solution also. So taping pin 1+2 of left ribbons right side, thats it ? Would apreciate your answer. Thank you
No other method Just try the same
Napakaswerte niyo pong binayayaan kayo ni god ng ganyang talento di po biro ang pagrepair ng tv lalo nat masisilan ang mga board nayan pagnagkamali ng hinang lahat damay2x po at sakit sa ulo pa pag nagkataon kay goodjob sir im salute you
Maraming salamat po @Chiesa Laynes
yun ohh.. ang lupet tlaga ni master candido sa pamamagitan ng kapirasong tape na tino yang double images na Sony sana matutunan ko dn yan
what pins did you covered ?
Galing mo tlaga kuya sa ganyan that's we called a talent. Keep it up and more clients tgis 2021. God bless you.
@Iriel Tagalog thank you for this nice comment and thank you for watching.
Napakagaling nyo po gumawa ng mga ganyan machine continue lang po sa inyong vloging sending my full support to your channel keep safe po sir godbless po stay connected lang po
@Norlailah Macabanding thank you for this very encouraging comment and thank you for watching.
Galing nyo po sir,,,restore nyo po ang unit,,,tamang tama tong content mo dahil mahilig din ako magkumpuni ,
Hi ka tech salamat po sa video mo yun sa tv na ginagawa mo po same sa tv na gingawa ko po ginaya ko po yun technic nyo ngyon ok na po yun tv na sony 65 inch
Congrats brad
Sir tanong ko lng po kung ganun po ba tlga me konting prang shadow na nagaappear or me kulang pa po sa natakpan ng tape?.....thanks i advance po
Pati pala double image makuha sa tape method, akala ko tuli lang ang remedyo, maraming salamat sa video mo sir, alam kuna ngayon kung anong gagawin ko pag may may encounter akong ganyang trouble
Thank you @Alan's Kit
Watching from Batanes brad, maraming salamat sa pag share ng mga video na katulad nito, marami kaming natutunan
Lablab na talaga...nice sharing ur skill sir...
Thank you @Fely Mixed Vlog
Thanks for sharing po sir watching from Hong kong stay safe and keep vlogging like this another guide how to fix TV
Keep sharing sa mga kaalaman nyo po..nakakatulong kahit paano.
Thank you for this video, it helps a lot. I have flickering screen start after minutes ( not at the start )
I will try your directions and hope solve the problem.. Thanks again for sharing
@Younes Sleibi thank you for this comment and thank you for watching...there are two white ribbon (1) RIBBON ONE OR LEFT RIBBON (2) RIBBON TWO OR RIGHT RIBBON and there are four main tape placement location 1) RIGHT SIDE OF THE LEFT RIBBON 2) LEFT SIDE OF THE RIGHT RIBBON 3)LEFT SIDE OF THE LEFT RIBBON 4)RIGHT SIDE OF THE RIGHT RIBBON
you can use 2-15 or 2-13 first two pin no cover pin 3 to pin 15 cover by tape
tamsak done,,full wacht,,,,thanks for sharing this vedio
The best po talaga kau sir.ang galing nio po.idol
Thank you@Cecilia Paradero
Sana ol may ganyan skills mwaahugs Sir
Thank you @Aqcdrn mgndaq
Ang galing ng talent mo sir. Pagpalain po kayo
Thank you
Magandang tuturial po yan sir mor vloging sir stay connected lng po godbless
What an amazing talent.. Thanks for sharing this looking forward more uploads
Thank you
How many lines did u cover with tape ?
@kamran karbasi thank you for this comment...it is in the video I need to play that video if i have time,so I can say how many lines covered ,the video is my only reference record.
Galing tlga ni talento mo sir nakakamangha happy new year sir candido
Thank you @kusina ni Mader
Thanks for the amazing video. My Sony TV no more flickering 👍
Ok refer kita sa 09208132026 or 09053993997
Congrats
Ang galing mo talaga Candido. Fw
galing mo sir keep it up po
Thank you
Ang laking Tv. Nakakalula naman manood sa ganyan ka kalaki. Mamahalin pa
Thank you
wow sir idol ang galing mo talaga kong may mag pagawa sa akin papuntahin ko nalang sayo
hi my friend . nice video
happy new year
Thank you very much for your video.
I have a Sony 75X8500D which has this intermittent double image problem.
But how do I know which pin is hidden?
@joelgavotto6519 thank you for this question and thank you for watching...tape method solution for flickering double image problem on led tv have no exact pin location to be covered by tape flickering double image problem exist when any of the lcd's tft component won't work properly it could be connected in different pin location so to emitate my pin taping in my video has no guarantee that you can solve the flickering double image problem, my video only give idea that the flickering double image problem can be fix by tape method either putting the tape from left ribbon or from the right ribbon you can see in my video where I put the tape that solved the problem if ever you reflecate my pin placement and still no success even you place the tape in any pin location it only mean the lcd problem of your tv is unrepairable remember tape method repair only has 70percent success rate if you're a legitimate led tv technician but if you're not a technician the failure rate is 70 percent ,my video will give only idea how to solved the problem to all technician who didn't encounter this kind of trouble...my video also give idea to all tv owner that the problem flickering double image can be fix by tape method instead of replacing the whole lcd panel.
@@CandidoMembrebe Thank you for your reply and I fully understand that your method may not work.
But on which pins should I put the adhesive tape?
If I have this information, I could do some tests on the tapes.
@@joelgavotto6519there are two white ribbon left ribbon or ribbon 1...right ribbon or ribbon 2., try to tape pin 3 to pin 12 from the right side of the left ribbon if no luck transfer to ribbon 2 or right ribbon try to tape pin 3 to pin 12 from the left side of the right ribbon.
@@CandidoMembrebe Thank you for your reply.
I've found a solution similar to yours here ruclips.net/video/n8FWBTZ-fdw/видео.html, but it's the same TV model except for the size.
It works but I think the red colour is different.
I'll try your positioning to see if there are any improvements.
Thanks again for your help
@joelgavotto6519 welcome
thank you for sharing. Galing ganun po pala un.
Thank you
Hello good day sir!
Im faroq from Malaysia. I have 2 problems with my sony kd65x7000E
First one my tv cannot switch on. But I already solve, as I replace the power supply board.
Second one is the flickering image. Mind to share which pin you cover at the ribbon connecting to tcon board ?
Really appreciate if you can help me. Thankyou
@Faroqpazli thank you for this important question and thank you for watching....take note your 65 inches SONY BRAVIA has 2 ribbon
Ribbon 1 or left ribbon...ribbon 2 or right ribbon try to place the tape using 3-15 pin 1 and pin 2 no cover pin 3 to pin 15 covered by tape place it at the left side of the right riboon if no luck place it in the right side of the right riboon if no luck place it to the right side of the left ribbon if no luck place it to the left side of the left ribbon that's all
Thanks for your questions
@@CandidoMembrebe Thanks for the answer
ang galing naman done tamsak
Thank you, Tried this and it worked.
Congrats
@@CandidoMembrebe do you repair other brands din and have extra flex cable if May naputol?
Hello good day sir, mind to share which pin he cover at the ribbon? Thankyou in advance
Candido Ano number mo?
Refer to 09053993997
Dalaw ulit sir here
yo, ich habe das gleiche problem, nur in einem
KD 65XE7005, koennen sie mir freundlicherweise die abzuklebenden pin’s nennen?
Filipino language please or English
Yo, I have the same problem, only in a KD 65XE7005, can you kindly tell me the pin's to be taped?
@torstensawatzki5189 if your Sony tv is the same parts to my 65 Sony Bravia in the video so you can get better idea in the video than any written or verbal explaination ,like what I did when I have customer 65 inches Sony Bravia I just play this video and watch it and follow where I put the tape.
How about the image quality after that bro ?
Decrease or not ?
@vincentallan1810
Thank you for this question and thank you for watching..this video's lcd problem is light minor lcd issue that's why the resolution is good almost no different from original resolution...there are lcd issues like this that after repair you can see the different like left side or right side color right side or left side linearity it's visible video quality decrease.
Watching from hk po
Thank you
Is it possible to fix double images and vertical lines problem in sony klv32w652d..... kindly reply...it is only 3 year old TV.
Kaya po refer to 09208132026
Tried this for my TV (the same model) but didn’t work. Probably I didn’t cover the right pins. Can I know which pins you covered?
Take note there are 2 ribbon ribbon 1 is the left ribbon ribbon 2 is the right ribbon, one ribbon has two side left side and right side....you can try at the right side of the ribbon 1...... 2pins no cover pin 3 to pin 17 cover by tape if no luck go to ribbon 2 at the left side 2 pins no COVER pin 3 to pin 17 covered by tape this is called tape placement code 2-15 ...two pins no COVER pin three to pin 17 covered by tape you can also use code 1-14 or code 0-13
@@CandidoMembrebe Thanks, will give this a try surely and let you know if it worked.
@@RaghuramSupramanium does it works ?
What happen to your TV?
@@Alifn6304m Didn't work for me. Probably I wasn't doing it properly
My tv sony bravia xr-55X90j has the same problem. I have covered Number 3 to 16. But now i have faded color at the right side. Which pin I need to cover for my TV’s double image problem??
Thank you for this question my video is the best instructions nowadays every time I encountered flickering lines problem of a Sony Bravia I just play and watch my video,,one purpose of why I recorded and upload my video is to a ready guide whenever I encountered such flickering problem so just watch till end of the video to guide you the problem if your tv is not same model of my video you need to call a tv technician to fix your tv because my video is intended primarily for the technicians who never encounter such problem technician can easily follow my video.
Hi Sir, I have flickering screen start only after few minutes tv On (Model : Sony KD-49X7000E).
please advise which ribbon & numbers to cover with tape.
Thank you.
@Boby G thank you for this important question and thank you for watching..I haven't recorded a flickering repair video for Sony Bravia kd-49x7000e....I can only give you a idea make sure your also a tv technician since all of the video is more on idea....have you noticed there are 2 white ribbon ribbon 1) or left ribbon ribbon 2) or right ribbon try to cover pin 2 to pin 13 at the left side of the left ribbon if no luck try to cover pin 2 to pin 13 at the right side of the left ribbon if no luck go to the right ribbon same procedure.
Kuya master Technician here baguhan palang po Ganyan din po tv ko Kaya lang washout ung kalahati , yung kalahati ng flickering tapos now nagbiblink na ungbrednindicator niya.
Magagawa pa kaya to Master. Salamat po Pashout out naman po ako sa Nxt video mopo.
Thank you @ RMG MUSIC TV sa comment na ito at thank you din sa panonood mabuti nyan pa check nyo sa technician malapit sa lugar nyo ng malaman kung repairable pa iba kc kung ma actual check up
Cuantos pines aisla y de que lado ?
Instead of putting tape can we change the ribbon ?
#Gerald Ong thank you for this important question and thank you for watching, no...change ribbon will not solve the problem
@@CandidoMembrebe if I tape the wrong pin any short-circuit will occur ?
If you're not a technician high percentage of damaging lcd may occur
@@CandidoMembrebe thanks for the info. Basically the issue here is the tcon board or the panel itself ?
@@geraldong1060 it's mostly the panel
wow ok yang brand na yan - teacher ahmore
Thank you
Thank you. It really work.
Congrats sir
Nood ko yan full sir repeat nlng ito
Thank you @Yaln Escapades
San po area mo po? Ganyan din po kz yung problem namin sa tv namin. Same brand and type po.
@Mhai Lee thank you for this important question and thank you for watching...for tv repair concern refer to 09053993997 09208132026.
sir isinama nyo po ba sa ntakpan ng tape yong ground yong pinakagilid ng rebbon pra kasing indi sa video mo.
Hindi po.
tamsak po.. god bless
I have taken a video of my KD-65X7500D flickering issue. How Can I send to you to verify and advice? Through What's App?
Thank you for this important question and thank you for watching....refer to 09053993997 again thank you and God bless...
Worked for an 2 hours
@Itsmepunnana thank you for this comment and thank you for watching
🤩😍🥰
❤️👍
Magandang araw Master ano po mga data Ang nilagyan mo ng tape
Ckv line from level shifter
how many pin you tape
@Jay Flores thank you for this question and thank you for watching itong video lang na ito ang pinaka record ko pag may tangap ako na ganito rin ang problema peneplay ko lang ang video ko na ito para bilangin kung ilan pin ang tinakpan ko pwede nyo rin naman tingnan sa video ko na ito kung ilan pin dahil klaro naman lage nyo tandaan na idea lang po ang makukuha nyo sa video na ito yan naman talaga ang dapat dahil para naman may mag aaral pa sa mga technical school
yung parang me image na naiiwan po kaya sa sony at mga horizontal lines ano kaya po problema nun?
Sira na lcd
ay ganun po di naman po sya naiiwan ng matagal para syang nag double image pag lumipat yung eksena pos mawawala
Opo lcd pa rin ,usually kung may vertical line or horizontal lines sira lcd minsan nagagawa pa by tape Method pero karamihan hindi na magawa maliban kang kung papalitan ng lcd
Just lucky day , i have same problem ,nothing change
Yes considering most of lines on screen and flicker problem is due to defective lcd not all can be fix by tape method some of those problem need lcd replacement it happen to me out of 10 only 7 have been fixed the 3 replace lcd panel.
Sir sayang hindi closeup yong pag lagay mo sa tape ilang pins ang nilagyan mo...
Thank you
Master tech din aku my ganyan din aku irepair sony 65 alin signals binlock mu at ilan pins lahat sana mahelp muko bro..
Salamat po sa panood tingnan nyo po ng maigi ang video dahil kaya ko rin bina vlog ang mga gawa ko para pag may gagawin ako mayron na akong guide pe play ko lang video ko may kodigo na ako
@@CandidoMembrebe salamat master..
Welcome
@@CandidoMembrebe master ok na po un ginawa ko sinirvisan ko kahapon salamat sa ideya..
Ano pong signal ung ni blocked nyo sir. Thanks po
Ckv signal po.
idol sa flex lang ba problem noon
Actually LCD ang may problema binablock lang yung signal papunta sa area na may problema
@@CandidoMembrebe wow ang galing naman na gawan pa ng paraan
mumche life
Sir my gnagawa dn aq nyan at nagawa kna dn yan mga 5 months nag balik ngaun prblma kahit ano try q uli ayaw na bmalik...san kaya trouble pa kato
Linisin nyo po yung pins dahan dahan doble ingat ,I urong urong nyo yung tape left or right
Magkano po labor pagawa 49 inc sony
@Ellaine Sibunga thank you for this important question and thank you for watching...refer to 09208132026...09053993997 again thank you and God bless...
master, ilan pin poba tatakpan?
Bro pwede po ba mahingi fb mo thanks
candido membrebe lang bro
🤩😍🥰