Knocked off hours of my life trying to figure this out and this video single handedly out did 30 minute, hour long tutorials in 3 minutes. Haven't checked out the rest of your chan yet but this is super dope content.
thanks bro.. i’ve been trying to make valorant montages with speed ramps but it’s hard to find a good tutorial using premiere pro since most are usually ae
absolute godsend. Didn't know about the fact that interp doesn't show on preview and you have to render it, I thought it was busted xD (didn't know about the I and O either) TYSM
Bro thank you for your video!!! I got one question though, how do you sinc the audio if you did multiple speedramps in an edit? I have been struggling sincing the audio on my clips :c
glad the video helped but for me, i like to mute/delete the original audio of the clip first (possibly leaving in the gun sounds) and edit my speed ramp kills to the beat of the music. after that i’d add the gun sounds (e.g awp shots) and sync it to the beat/kill whilst adjusting the sound speed appropriately to match the clip. there could be other better ways but this is my method. the gun sfx could be found anywhere on YT as well.
does it require the clip to be always in at least 60fps ? cause for me when i try with any clip below 60 , it gets very sttutering and not smooth at all
speeding up is the same as slowing down just dragging the line up to create a fast ramp instead of the dip (slow ramp) you saw in the video. instead of slowing down to 25% raise the line to 500%+ and adjust it to your liking.
Hi! I wanted to give a constructive tip for this type of video, I wanted to know if you could put subtitles on your video. It can be in English anyway, so myself and others can use the youtube "automatically translate" tool. This would greatly increase the audience for the video, bringing several people. The youtube automatic tool doesn't say very well what you want to say in the video, it ends up getting confused, so if you put the subtitles yourself, we can translate and understand. I'm using google translator, hope you understand the context I wanted to give. Say hello to Brazil, this is a great video!
changing the speed ramp can edit the length of the clip. after adjusting, just drag the clip to the right to extend it or adjust the ramp completely by clicking and dragging the middle of the “dip” to fit your desired position. sometimes changing the ramp can cut the clip short, just remember to extend it after the ramp is made if needed.
for speed ramp edits, the audio must be edited separately unless you use the rate stretch tool (R) but the slo mo won’t look as smooth if they’re both linked
idk if anyone will see this 2 years after the vide came out but does anyone know how to do the same with the audio cuz after doing the slomo the audio is out of synch. thx in advance.
when I turn on optical flow, it makes the scopes glitch out a little bit? Is there a workaround? Is it just to not use optical flow unless using slowmo?
it also depends on your project settings too (frame rate) but I personally do not render the clip optical flow unless its slowmo. But duplicating the same clip (alt + drag up) usually fixes it.
![HOW TO EDIT GAMING VIDEOS [PREMIERE PRO TUTORIAL]](http://i.ytimg.com/vi/J9sdBXe9LQk/mqdefault.jpg)
Got you on recommended after 3 years and finally learned how to make smooth slowmo, thx!
Knocked off hours of my life trying to figure this out and this video single handedly out did 30 minute, hour long tutorials in 3 minutes.
Haven't checked out the rest of your chan yet but this is super dope content.
finally i found what i was looking for , u the GOAT, so simple and quick, my edit looks so sickk THANK YOU
thanks bro.. i’ve been trying to make valorant montages with speed ramps but it’s hard to find a good tutorial using premiere pro since most are usually ae
Bro i actually needed this 3 years ago. Now i learned Sony Vegas just for time mapping
After all these years.. the most decent and helpful video to slow-mo / time-remapping. thanks!
Hella useful, glad there is a short and sweet video on it!
thanks so much, but i still got a question... what about the audio?
Thank you soo much for this, your quality is extremely good bro dunno why you dont have more subs
u saved my entire project
I was curious about how this effect works, but I finally found a good video
Man you're a legend thanks this video will be really helpful
finally found what i've been looking for sure great knowledge to use in other things also!
i dont have adobe but this still helped me figure out how to do it in davinci so thx bro
how to get the sound to get slow too?
Thank you, man. That's exactly what I needed
thanks
I actually learned how to do it bro thx so so much bro god bless you
WHAT A GOAT
You just got yourself a sub,dude this tutorial is so fricking useful I appreciate you🖤🖤,Your funny BTW
absolute godsend.
Didn't know about the fact that interp doesn't show on preview and you have to render it, I thought it was busted xD (didn't know about the I and O either)
TYSM
glad the video helped 👍🏽
AYEE Glad to be your 1k th liker
I love how you just get to the damn point
hi man , can u make about bouncing after kill tutorial..your tutorial is helpfull !!
5 second into the vid and im already subbed, pls make more vids like this! im tryin to up my editing game
got it on recommendations subbed!
thank you very much brotha
Thank you my man,God bless you!
Tks a lot, only 3 mins solved all!!
thats insane ur the GOAT
Bro thank you for your video!!! I got one question though, how do you sinc the audio if you did multiple speedramps in an edit? I have been struggling sincing the audio on my clips :c
glad the video helped but for me, i like to mute/delete the original audio of the clip first (possibly leaving in the gun sounds) and edit my speed ramp kills to the beat of the music. after that i’d add the gun sounds (e.g awp shots) and sync it to the beat/kill whilst adjusting the sound speed appropriately to match the clip. there could be other better ways but this is my method. the gun sfx could be found anywhere on YT as well.
ty@@DONCYR
Thanks, I just learnt something new
the damn sad thing is i was learning premiere pro in school but i got high and slept the whole time lmao so now i gotta learn it myself
np the higher education starts here 😭
Very helpful! Thank you!
gracias bro yo usaba el after effects pero renderiza muy lento y es muy tedioso, esto es mucho mejor
W video.
thank you so much! 🥰
thank u king
THANKS MAN
does it require the clip to be always in at least 60fps ?
cause for me when i try with any clip below 60 , it gets very sttutering and not smooth at all
WHAT I WANTED MAN
big thanks to you please make more
you're the best fr
can u made more videos like this one?
Thanks alot dude..
Is it possible to just sequence out the whole video at once or do I need to do it for the small clips in the big video?
asking for a friend
thank you, sir!
Nice Video boi!!! but can you show how you are doing that is like in slow motion but after it go super fast for like 2 second ?
speeding up is the same as slowing down just dragging the line up to create a fast ramp instead of the dip (slow ramp) you saw in the video. instead of slowing down to 25% raise the line to 500%+ and adjust it to your liking.
love you bro
thx so much bro
Love u dude thank you
W tutorial
can you make a tutorial from the intro fast and slow motions
Thank you so much bro, I never knew about the Time Interpolation effect. Does Optical Flow only works with slow mo clips?
optical flow just allows the frames to be smooth but it can be applied to any clip
The video is ur intro going fast then sliw again, how do u do that can we get a tutorial in that please
legend! 🙏
very helpful! Thx
Thank you brother !
i know this is an older video, but im not getting and marker to create the ramp after i adjust the speed... any help?
tysm, i subscribed
btw can i ask whats the difference between time remapping and slow mo?
kinda confused lel
it’s pretty much the same just premiere pro’s term
@@DONCYR thanks dud imma start using that then
My speed ramp line unable to move up or down..
Hi! I wanted to give a constructive tip for this type of video, I wanted to know if you could put subtitles on your video. It can be in English anyway, so myself and others can use the youtube "automatically translate" tool.
This would greatly increase the audience for the video, bringing several people. The youtube automatic tool doesn't say very well what you want to say in the video, it ends up getting confused, so if you put the subtitles yourself, we can translate and understand.
I'm using google translator, hope you understand the context I wanted to give.
Say hello to Brazil, this is a great video!
much love to brazil and i’ll definitely keep this in mind thanks for the tip 👍🏽
@@DONCYR ty
sickk, ty boi
ok im definitely switching to premiere pro
thank you so much !!
ty so fucking much dude I been wanting to edit for years and never got used to ae
WHAT IN THE WORLD IS THAT PERSON DOING at 1:06??? 😂🤣😂🤣
What about the audio the video slows down but not the audio
Wow
If i drag the strech preset it will not strech it it will only zoom on it without showing the sides, why is that?
hello can u make tutorial edit KILL FLASH ? and please And please teach us how to download new effects
say less !
@@DONCYR what can I say less ?
nvm that but what new effects are you looking to download?
@@DONCYR If you have 4: 3 in Present, for example, and so on, there are a lot of unknown effects for me
next vid i got you covered 👍🏽
really easy to follow ty
Can you do another video I didint know what I do
Bro just wanna know what did you do after rendering that small portion?
I don't use premiere but sick tutorial man!
HOW TF DO YOU DELETE THE MARKERS WITH YOU PRESSED WITH I AND O
Thanks for this helpful
i have black bars but when i put in premiier pro doesnt have black bars, thats not a big problem but i want it streach cuz i play on strech
what frame rate do you record in , when i slow mine down itlooks terrible and not smooth
i record in 60 but you can use after effects to smooth it out even better cuz AE’s optical flow is unmatched
Thank you
im using retroville for my edit so confused when I heard drunk and nasty lol
it’s still tlop5 you have great ears regardless lmao
bro after changing back speed to 100, why my clip is cutted at the end?
changing the speed ramp can edit the length of the clip. after adjusting, just drag the clip to the right to extend it or adjust the ramp completely by clicking and dragging the middle of the “dip” to fit your desired position. sometimes changing the ramp can cut the clip short, just remember to extend it after the ramp is made if needed.
ty
is there a way to link the audio to the slow mo?
for speed ramp edits, the audio must be edited separately unless you use the rate stretch tool (R) but the slo mo won’t look as smooth if they’re both linked
idk if anyone will see this 2 years after the vide came out but does anyone know how to do the same with the audio cuz after doing the slomo the audio is out of synch. thx in advance.
i need this answer 😝
What do I do if the color turns red?
Hearth me
the best
Thanks!
tell me how your fps is so good
How do I get motion blur?
hy idk if you still respond but if the bar turns red when i do the optical flow thing does it mean it didnt work or i just cant see it?
if it turns red it means it works and all you need is to do is render out the clip (usually by pressing enter)
how do you get the plugins cause when you search for them its all just virus and scams you feel me
How can I use this stretch preset? Its prfpset and I need ffx...
Can u give me ur all effect pack because i want to start editing and i dont have anything
my effects, presets + much more will be available REAL soon, stay tuned my g.
wait how did you add the shake pleees tell me :(
in the first clips how do you do it
fucking valorant player think
Thx
when I turn on optical flow, it makes the scopes glitch out a little bit? Is there a workaround? Is it just to not use optical flow unless using slowmo?
it also depends on your project settings too (frame rate) but I personally do not render the clip optical flow unless its slowmo. But duplicating the same clip (alt + drag up) usually fixes it.
nice
how do i make like that second line to go from slow mo to fast again
Just do the same thing you just did. If your wanting to match a beat make sure that you speed up to the beat + Kill to make the shot on the beat. :)
left ctrl to make a new keyframe
how do i add the curve at 1:30
click and drag the small dot to the left and it’ll form that curve
@@DONCYR i love you