Laminating Series - Cleaning The Rollers in Your Laminator (6/6)
HTML-код
- Опубликовано: 21 окт 2024
- Visit Us: printfinishing....
Call Sydney Stone: 1 800 668 6055 or 905 673 9641
RSL2702S Laminator: www.printfinish...
See Our Wide Array of Lamination: www.printfinish...
Cleaning Laminator Rollers: How to remove adhesive residue from the hot rollers or heat shoes of any hot laminator, using a special Rubber Cleaning Block.
Problem with this thing is that it DOES crumble a little bit. Leaves little bits on the roller, you can even see in the video. These then melt and flatten on the roller. Needing the roller hot and spinning then just causes these to build up as well. I've found keeping a slightly damp cloth on hand to rub these off is best. Still doesn't seem like the best way.
Bad thoughts. When I clean the roller the way you show, there will be stains on the roller.
What happens when you don’t have the block?
You might find that the adhesive from the laminating film will adhere to the rollers. This happens in instances where the upper and lower film might be misaligned or where at the adhesive might squeeze out at the sides.