clutch masters fx300 for my k24
HTML-код
- Опубликовано: 22 авг 2024
- video was re uploaded due to a copyright claim . I fixed the problem , hopefully it doesn't get claimed again .
15 min K series build
• k24 build in 15 minutes
If a MECH A NIC video helped you consider donating to my patreon account to help support the channel. / the_mech_a_nic
or my paypal
paypal.me/jona...
THE MECH A NIC’s amazon store ,here’s the tools I use
www.amazon.com...
THE MECH A NIC’s Instagram page
/ the_mech_a_nic
THE MECH A NIC’s facebook page
/ the-mech-a-nic-1356996...
Thank you for watching my video, I appreciate the support !
#k24 #k20 #k24build #4piston #dragcartel
video was re uploaded due to a copyright claim . I fixed the problem , hopefully it doesn't get claimed again . Unusual audio is due to youtube copyright claims .....
They trip on the music ik im about to buy a civic with a hole in the block do you think its a good ideal ? And do a whole engine rebuild its a 13 civic Si k24z7 i wss planning to put a k20 block with a k24 top end usually its the opposite i was planning to buy & rebuild the whole motor to aim for over 300 whp do everything u did on ur build from water puMp upgrade to piston and rods to crankshaft & use a k20z3 head as well or k24a2 head so it works not sure tho thats im askinb the mechanic if I should pull the trigger & buy & rebuild the motor? And make it fun car that can daily
Or k24a2 block & k20z3 head be the ultimate engine build for my goal
@@bushtyga999 I'd really go for the k24 block. You'll have more power overall.
@@themechanic6117 yeah thats what a tuner guy said that j know bc the k24a2 have different sensors so just change the block backk to a k24 z7 block k20 head and cams like how u built you motor similar to that I should be able
to push out 300hp or near it with hondata and a tuen and ide do a fuel rail upgrade so ide just use k20head k24 bottlm end so higher flow and a rbc like you did he say can be pricey whats a pricerage i should look to be around??
@@themechanic6117 let me know what you would recommend thats budget friendly and what company use for my parts outta the big 3 for my build acuity, hybrid racing, or K tuned
I've seen some 8 second Civics some 9 seconds and all over the spectrum. That K series is a monster.
Considering how much negligence comes through your garage on the pieces of junk you have to work on, it's so refreshing to see something that has been treated with respect haha. Great attention to detail and taking care of your stuff man, it will all pay off in the end!
Thank you! 🙏
The blurred bolt insertion was unexpected but appreciated...
Such a pretty engine. They fit nicely into Miatas too
Definitely. It'll be going into the crx soon 👍
Heyyyy!! I’m new to your channel. Very cool content 💪🏼
I liked when you torqued the flywheel bolts to 130ft,lbs with just one finger!😂
Lmao thanks for the comment. Glad you enjoyed the video
Thank you sir👍
Cool editing skills there, I like your music editing. Somehow I must have missed this one the first time. I notice that RUclips now have a delayed option where you can upload as a private video for a few hours, then check for copyright claims and run through it one last time to be sure there are no mistakes. If all OK, you publish and notify subscribers and you're good to go.
This claim popped up over a month or two after it's upload . RUclips sucks lol
I have watched the first one and this one as well great job bro
Thank you 💪
This engine has come a long way in the build but we need to see this beast in the Civic. But do think you have a bracket fetish 🤣🤣🤣🤣🤣
It'll be going into the crx real soon. I promise 👍
AWESOME VIDEO!!!
Thank you, I appreciate the comment
Great K24! 😊 how often do you turn the engine ?
i also have a k20 ready to swap in but i can't continue the project right now...
Need more crx k24 content
The stock crx engine will be coming out soon 👍
How much does your flywheel weight?thanks nice build
If I remember correctly it's around 8 lbs
@@themechanic6117wow 😮
Hey man not to sure if you still post or do RUclips anymore. I’m getting the fx350 installed by me and brother. Where are the exact issues you ran into? I skimmed through the video but my brother doesn’t quite have the patience. He thinks it’s an easy job, but he also did his Subaru where he had to pull the whole motor, and his 5.0. He said with all my tiny parts it’ll be a piece of cake. What do you recommend me picking up for extra help, and where will we struggle with the most you think? He’s a mechanic so he has to deal with axels and rack and pinions everyday, by other than that what do you recommend for making this job easier?
What flywheel did you use? I have a k24 in my 07 si with a stock k20 trans and I'm not sure if fitment is gonna be an issue, I like this clutch. Do you have a parts list by chance?
I believe I'm using the clutch masters fx300 clutch and a fidanza flywheel for a k20 trans
👍👍
I was wondering about your CRX project... i havent seen much about since covid struck... are you building out this motor to put it into the crx?
Have you checked out my playlists? I have crx videos in there. Yes this engine will be going in the crx 💪
This is the longest K build in youtube history... lol
Good . Aren't you tired of those youtube channels that build a new car every month? 🤣👍
@@themechanic6117 lol.. I dont really sub engine building or car modding channels... I get bored easily....
@@oldskool1979 I promise the crx stock engine will be coming out soon 👍
Whats your experience been like with the kit bro? I just had mines shipped. Gonna install mines soon.
I had this same kit on another car of mine with no problems. The pedal feel was just like stock
@@themechanic6117 nice thanks did you abuse it tho? I’d consider myself an occasional weekend racer.
No I never beat on it. For like the first month or so the clutch felt like it was slipping. CM said I just need to break it in more ... to me this clutch never felt like a performance clutch, it always felt like a regular daily driver clutch but your experience may be different
@@themechanic6117 interesting let’s see how it performs. Thanks for the feedback
When was last time u drove your rex?
I drove it a few weeks ago. Before that it's been months... unfortunately