🟠 Multi Filament System for Creality K1 and K1C: ruclips.net/video/zW_LQTWsoRs/видео.html 🟠 Multi Filament System for Creality K1 Max: ruclips.net/video/1EkyMdFxhik/видео.html 🟠 Inventor's Garage Store: www.inventorsgarage.store/
Would definitely buy my k1 max again. Been a great printer to get into the hobby. Build plate volume was #1, camera#2 , ai detection/Lifar was #3 but i dont use it anymore. #4 better appearance and was within my budget.
K1 max uses a main powered bed unlike k1/k1c use 24V dc power which is why K1 max is more power efficient. Also K1 max has a LAN port which is absent in both k1 and k1c, pity. Will have to wait and see if there will be a K1C max release in future, which brings all the new and improved features of k1c to the k1 max.
I think it's a matter of space and price. If you can afford it, get the Max. I upgraded from a base model Ender 3 Pro, I sold that to buy my K1, and I have a supplemental Ender 2 Pro on the same table next to it, while I didn't have the money to buy the max and the 2 pro, I wouldn't have had enough space for either as well. But after a month of use, I can say without question I do not regret either purchase.
Olá. I don't know that there is a word for that type of tool generically, but I've heard that exact tool referred to as a "nozzle wrench" or "nozzle socket." The pliers as you call them can be referred to as "nippers" or "flush cutters."
Should mention we're on our 3rd generation of extruders for the k1 and k1 max, and something needs to happen with the scandal about the extruder for the k1c. Where is there a reliable all metal extruder for this machine?
I am still struggling with the decision to either buy the K1 Max or the Bambu P1S. They are both roughly the same price at the moment. Advantage of the K1 Max obviously is the bigger bed and I think I do need that. Advantage of the P1S is the possibility to add an AMS and be able to print multi colour which is very (!!) nice to have but not strictly necessary and expensive. At the moment the bigger bed is very apealing. But the endless number of video's with all kinds of issues with the Creality machines are pushing me towards the Bambu as I have no experience with printing and I am not a technical buff that can easily solve all the issues with the Creality machines.
@@Smoovs1956Meanwhile I ordered a P1S with AMS. But I am also drooling over the FLSUN machines. Ofcourse the V400 but there are a couple of mouthwatering new enclosed machines about to be released by FLSUN. When I need a second machine it is going to be an FLSUN. So before you decide to send your P1S back, take a good look at all the Creality K1 Max horror video's en maybe get inspired by FLSUN V400, T1 or S1.
Hello Wesley, I have a Ender 3 Pro and a Ender 3 S1 Plus (300x300x300). I´m rigth now buying a K1Max or a K1C, I don´t kow very well. I like de K1C for its capability to proces carbon fiber materials, but I like de size of K1Max. I writing you because I cant find this infrmation, is there any kit to convert the K1Max en carbon?
Nominal power for k1 is around 150W and for k1 max the nominal power is around 350W, if the printing time is the same for both the printers then how on earth they both have the same power consumption! Strange 😮
"fattig" ooohh... you meant "fatigue". Dang subtitles.🤣😂 Definitely going to go for the K1 Max, the built volume looks good enough for full sized helmets.
I tend to design large items that require the 300x300 build volume. It's disappointing that the zig-zag takes up so much space on the build plate. And it's also disappointing that they didn't come out with a K1C Max. The ideal printer for me would be a K1C Max (or the K1C with a 300x300 build volume). But if I can't benefit from the extra build volume, then I might as well just spend the extra cash for the X1-Carbon and take my business over to Bambu Labs (regrettably).
I prefer the K1 Max, which is why I bought it. It's all about the build size. I would have bought the Bambu Max instead, but it doesn't exist. To Creality's credit, the Max has been the only printer I've owned that comes close to the reliability of the Bambu's. If it continues in this manner, it will be a keeper for me. The K1/K1C simply isn't big enough. Typically, we would call the cover of the printer "the lid."
Not a fan of the fact that the K1 Max has a flat lid compared to the K1's shaped lid. I feel like if the K1 max had a similar lid that it'll eliminate feeding issues.
I own a k1 and will never buy another creality peice of crap customer service suck keeps having error code111 know Sims to know why so in a few days I will be making a video of me though it out the door
🟠 Multi Filament System for Creality K1 and K1C: ruclips.net/video/zW_LQTWsoRs/видео.html
🟠 Multi Filament System for Creality K1 Max: ruclips.net/video/1EkyMdFxhik/видео.html
🟠 Inventor's Garage Store: www.inventorsgarage.store/
Always Informative. Thank you
Would definitely buy my k1 max again. Been a great printer to get into the hobby. Build plate volume was #1, camera#2 , ai detection/Lifar was #3 but i dont use it anymore. #4 better appearance and was within my budget.
K1 max uses a main powered bed unlike k1/k1c use 24V dc power which is why K1 max is more power efficient. Also K1 max has a LAN port which is absent in both k1 and k1c, pity. Will have to wait and see if there will be a K1C max release in future, which brings all the new and improved features of k1c to the k1 max.
Ya the 1000w is the heat bed the k1 max power supply is only 150w if I remember right
I think it's a matter of space and price. If you can afford it, get the Max. I upgraded from a base model Ender 3 Pro, I sold that to buy my K1, and I have a supplemental Ender 2 Pro on the same table next to it, while I didn't have the money to buy the max and the 2 pro, I wouldn't have had enough space for either as well. But after a month of use, I can say without question I do not regret either purchase.
The ender 2 pro is a phenomenal little printer.
I went with the K1 as I did t have much space where it was to be sited. I'd buy a K1 again, so far it's been great
Olá. I don't know that there is a word for that type of tool generically, but I've heard that exact tool referred to as a "nozzle wrench" or "nozzle socket." The pliers as you call them can be referred to as "nippers" or "flush cutters."
Should mention we're on our 3rd generation of extruders for the k1 and k1 max, and something needs to happen with the scandal about the extruder for the k1c. Where is there a reliable all metal extruder for this machine?
I am still struggling with the decision to either buy the K1 Max or the Bambu P1S. They are both roughly the same price at the moment. Advantage of the K1 Max obviously is the bigger bed and I think I do need that. Advantage of the P1S is the possibility to add an AMS and be able to print multi colour which is very (!!) nice to have but not strictly necessary and expensive. At the moment the bigger bed is very apealing. But the endless number of video's with all kinds of issues with the Creality machines are pushing me towards the Bambu as I have no experience with printing and I am not a technical buff that can easily solve all the issues with the Creality machines.
@@Smoovs1956Meanwhile I ordered a P1S with AMS. But I am also drooling over the FLSUN machines. Ofcourse the V400 but there are a couple of mouthwatering new enclosed machines about to be released by FLSUN. When I need a second machine it is going to be an FLSUN. So before you decide to send your P1S back, take a good look at all the Creality K1 Max horror video's en maybe get inspired by FLSUN V400, T1 or S1.
Well said. Top cover
Thanks for info.
Ok hi first of all thank for the super great information but they are hobby grade side cutters keep the videos coming and thank you
What software do you use to translate the video? It's pretty good
It's an AI translator - he covered it on a previous video - we really are living in incredible times.
Actually I didn't use AI translation on this video, it is my real bad english here LOL
@@InventorsGarage ha, ha.... then it's great! I thought the AI had mastered the beard!!!! 🤣🤣
@@InventorsGarage it's actually pretty good! Sucesso pra você!
Hello Wesley, I have a Ender 3 Pro and a Ender 3 S1 Plus (300x300x300). I´m rigth now buying a K1Max or a K1C, I don´t kow very well. I like de K1C for its capability to proces carbon fiber materials, but I like de size of K1Max. I writing you because I cant find this infrmation, is there any kit to convert the K1Max en carbon?
great video, was goign to buy a max but now even more so
Nominal power for k1 is around 150W and for k1 max the nominal power is around 350W, if the printing time is the same for both the printers then how on earth they both have the same power consumption! Strange 😮
"fattig" ooohh... you meant "fatigue". Dang subtitles.🤣😂
Definitely going to go for the K1 Max, the built volume looks good enough for full sized helmets.
I tend to design large items that require the 300x300 build volume. It's disappointing that the zig-zag takes up so much space on the build plate. And it's also disappointing that they didn't come out with a K1C Max. The ideal printer for me would be a K1C Max (or the K1C with a 300x300 build volume). But if I can't benefit from the extra build volume, then I might as well just spend the extra cash for the X1-Carbon and take my business over to Bambu Labs (regrettably).
K1c vs Max in terms of features and capabilities?
I prefer the K1 Max, which is why I bought it. It's all about the build size. I would have bought the Bambu Max instead, but it doesn't exist. To Creality's credit, the Max has been the only printer I've owned that comes close to the reliability of the Bambu's. If it continues in this manner, it will be a keeper for me. The K1/K1C simply isn't big enough.
Typically, we would call the cover of the printer "the lid."
Not a fan of the fact that the K1 Max has a flat lid compared to the K1's shaped lid. I feel like if the K1 max had a similar lid that it'll eliminate feeding issues.
thanks from Ukraine )
It's not plier. It's cutter!❤
Ele é fluente em inglês, legal.
if i have to spend the money for a k1max i would rather spend it on a qidi tech 3 max...
Pliers? Angle Cutters.
The one that provides home support .. or double a refund when they come out of the box mest up !!!!!!!!!!!!!!
I own a k1 and will never buy another creality peice of crap customer service suck keeps having error code111 know Sims to know why so in a few days I will be making a video of me though it out the door
really didn’t help me.