Did you have flashing coil on dash. Also was it just some split wire that was the issue. I didn't hear you speaking so couldn't work out what was happening at that point. Thanks
@@Boxing-ju1es I got error code 17058 (glow plug 4) and 19558 (intake flap motor) not sure which is causing the flashing coil. I'm guessing the glow plug 🤔. But it's like £300 to sort. With oil drained and new wiring blah blah
Hi, my vw golf4,1.9 TDI axr, 2004, don't starting sometimes. P0727 shown on my tester. I changed the G40 sensor with a new one but won't stars at all. With the old one starts. The car starts without G40 sensor but when I connect the new one it's stops. With the new on the On the vcds I have 19464 fail code( signal out of range). I need an advice! Thanks!
Sir i have a mk5 volkswagen jetta which dosent throw any code but stalls during the cold start i have swapped the high pressure pump,low pressure pump,secondary pump,common rail,injectors but completely no result ,but once it gets started the vehicle starts only during early morning the vehicle stalls other than that when ever i start during the day it is fine can u please help me with what i should look after there is no fault code when i scanned with the odis,obd,vcds all scanners
@@MrAdyboi sir dont worry i have solved the issue ,The problem is with you set of 3 that is ecm,pcm and key set swap all the three and the issue is solved rigth now
After replacing G40, G28 and the ECU, the car (B6 2.0 TDI 170hp) behaves the same: the engine stops randomly, only when I drive slowly, steadily, properly.
Hi, is engine speed sensor g28 fault P0322 and Camshaft position sensor g40 implausible signal P0341 the same sensor on VW touran 05 105hk?
Did you have flashing coil on dash. Also was it just some split wire that was the issue. I didn't hear you speaking so couldn't work out what was happening at that point. Thanks
I’ve got the same problem from today any idea?
@@Boxing-ju1es I got error code 17058 (glow plug 4) and 19558 (intake flap motor) not sure which is causing the flashing coil. I'm guessing the glow plug 🤔. But it's like £300 to sort. With oil drained and new wiring blah blah
Hi,
What kind of app and OBD device you use in this video?🤔
Hello. launch x431 pro
Hi, my vw golf4,1.9 TDI axr, 2004, don't starting sometimes. P0727 shown on my tester. I changed the G40 sensor with a new one but won't stars at all. With the old one starts. The car starts without G40 sensor but when I connect the new one it's stops. With the new on the On the vcds I have 19464 fail code( signal out of range). I need an advice! Thanks!
check wiring from ECU to sensors. Only original sensors.
@@MadmanCar I put G40 made by Delphi, thanks man!
Sir i have a mk5 volkswagen jetta which dosent throw any code but stalls during the cold start i have swapped the high pressure pump,low pressure pump,secondary pump,common rail,injectors but completely no result ,but once it gets started the vehicle starts only during early morning the vehicle stalls other than that when ever i start during the day it is fine can u please help me with what i should look after there is no fault code when i scanned with the odis,obd,vcds all scanners
Hi did you fix the problem I have the same trouble as you currently.
@@MrAdyboi sir dont worry i have solved the issue ,The problem is with you set of 3 that is ecm,pcm and key set swap all the three and the issue is solved rigth now
I've checked the ECM that's fine . What's the Pcm and what's the key set is the cars keys ?
After replacing G40, G28 and the ECU, the car (B6 2.0 TDI 170hp) behaves the same: the engine stops randomly, only when I drive slowly, steadily, properly.
Faisceau
Distribution was made. Problem solved. Finally.