I have found a smaller brushless motor that should fit, the D2225, 22mm diamter by 25mm long so no need to cut the chassis, but it is not as powerful however, 80W/11A under load as per the specs
How is the speed and torque? I plan on using 10t, same as stock (I found a 10t 0.6m pinion on AliEx) for 1:18 reduction with 1400kv motor, I did the math for your setup and you have 1:11 reduction and an output of 600 RPM with 2s whereas 1400kv with 10t will output 570 RPM, so about same speed as your setup, stock I think its about 470RPM (8500 RPM motor?)
Also, from my math (TIL P for pitch is the imperial measure of module), so if stock pinion is 10t 7.2mm, it's 0.6mod or 42p, 32p would skip or be noisy, no?
The outside plates facing left and right are metal, the parts of the chassis in-between that hold the ESC and motor are plastic, but they do make metal replacements.
Развлечения
Cool gearbox modification, good job.
Thank you! Cheers!
This is nice!!!
I have found a smaller brushless motor that should fit, the D2225, 22mm diamter by 25mm long so no need to cut the chassis, but it is not as powerful however, 80W/11A under load as per the specs
How is the speed and torque? I plan on using 10t, same as stock (I found a 10t 0.6m pinion on AliEx) for 1:18 reduction with 1400kv motor, I did the math for your setup and you have 1:11 reduction and an output of 600 RPM with 2s whereas 1400kv with 10t will output 570 RPM, so about same speed as your setup, stock I think its about 470RPM (8500 RPM motor?)
Cual es el link para comprar ese motor?,gracias
Also, from my math (TIL P for pitch is the imperial measure of module), so if stock pinion is 10t 7.2mm, it's 0.6mod or 42p, 32p would skip or be noisy, no?
Ok so im new to this but what will this do? Make it faster? Smoother????
Irmão o meu não está virando na hora que eu quero para o lado e para o outro só as vezes você acha que é o servo que estragou só tem 2 mês de uso
Você sabe qual bateria com mais (mah) eu poderia comprar para esse modelo
i am using Lipo Battery with 1100mah. i think the compartment can fit 1500mah lipo
wait and see part 2
Part 2:
ruclips.net/video/J3wqzO--dow/видео.html
What is Cherokee chassis made of? Plastic or metal?
The outside plates facing left and right are metal, the parts of the chassis in-between that hold the ESC and motor are plastic, but they do make metal replacements.
Terbaik.. time to look for a brushless motor.. 🤣
😁
saiz berapa motor tu tuqn ?
Sy guna 2216. Cri yg kecil skit pun ok. Tak perlu potong body atas tu nnti