How To Make 3 in 1 Spider Robot Using Arduino NANO and IO Expansion Shield | Complete Tutorial Video
HTML-код
- Опубликовано: 11 апр 2024
- Hi Friends,
❎circuit diagram, Arduino code and App download link - robotlk.com/how-to-make-3-in-...
💢My Website - robotlk.com/
In this tutorial, we will learn how to make an Arduino 3 in 1 Spider Robot. The spider robot's legs and body parts are made from 3D printing parts. This robot can be programmed in three ways. They are Repetitive movements, Obstacle Avoiding, and Bluetooth Control.
Arduino nano board, Nano IO Expansion Shield, and twelve SG 90 servo motors are used for the spider robot. Two 18650 li-ion batteries are used to provide power. An ultrasonic sensor is used to set Obstacle Avoiding and a Bluetooth module is used to control Bluetooth. An Android app is used to control the spider robot using Bluetooth. This Spider robot can be made into three types by changing the Arduino codes and modules.
⭕Below are the links to purchase the required accessories
🔰AliExpress Links,
1). Arduino Nano - s.click.aliexpress.com/e/_DFE...
2). NANO I/O Expansion Sensor Module Shield Board :- s.click.aliexpress.com/e/_DFL...
3). SG 90 Micro Servo Motor X 12 (180 degrees) - s.click.aliexpress.com/e/_DeX...
4). LM2596S-3-40V DC-DC step-down power MODULE - s.click.aliexpress.com/e/_Dm2...
5). 2Cell18650 Battery Holder - s.click.aliexpress.com/e/_DBS...
6). 18650 Li-on Battery (2x) - s.click.aliexpress.com/e/_DCv...
7). DC Power Switch - s.click.aliexpress.com/e/_Dcw...
8). HC-SR04 4Pin Ultrasonic Sensor - s.click.aliexpress.com/e/_Dmr...
9). HC-05 or HC-06 Bluetooth Module - s.click.aliexpress.com/e/_DDq...
10). Female to Female jumper wire - s.click.aliexpress.com/e/_DCl...
🔰Amazon Links,
1). Arduino Nano - amzn.to/498yqHY
2). NANO I/O Expansion Sensor Module Shield Board - amzn.to/3OffAHa
3). SG 90 Micro Servo Motor X 12 (180 degrees) - amzn.to/3HBSWoq
4). LM2596S-3-40V DC-DC step-down power MODULE - amzn.to/4bdHEnR
5). 2Cell18650 Battery Holder - amzn.to/3vRYZ5X
6). 18650 Li-on Battery (2x) - amzn.to/3OiC8Xo
7). DC Power Switch - amzn.to/4ba77Ph
8). HC-SR04 4Pin Ultrasonic Sensor - amzn.to/3u5YuEL
9). HC-05 or HC-06 Bluetooth Module - amzn.to/47WeJ4W
10). Female to Female jumper wire - amzn.to/42fjEwI
💢My facebook page :- / robot-lk-101113971569889
🔰If you feel creation of mine are valuable, interesting, knowledgeable please don't forget to SUBSCRIBE my channel, LIKE and COMMENT to my videos, SHARE them with your friends.
🔰Thank You Very Much Guys, Good Luck!
🔸 How to assemble the YP 100 Smart robot tank - • YP100 Robot Smart Tank...
🔸 Building The 6 DOF Robotic Arm - • Building The 6 DOF Ro...
🔸 How to control by Bluetooth the YP 100 Smart robot tank - • YP100 Robot Smart Tank...
🔸How To Make Bluetooth RC Car(Two Motor drives) - • How To Make Bluetooth ...
🔸How To Make Bluetooth RC Car(One Motor drive) - • How To Make Bluetooth ...
🔸How to make a Gesture Control Car - • How to make a Gesture ...
🔸Arduino Mecanum Wheels Robot Car - • Arduino Mecanum Wheels...
🔸Arduino FPV RC Car | FPV System - • Arduino FPV RC Car | F...
--------
#arduino #spiderrobot 
Наука
That's hilarious. I modded the exact same mobile app to control my own quadropod!
Is there any problem if I supply 7.5V to the servo because my charging circuit might be damaged, and I'm too lazy to buy a new one
I've not added SR20 obstactle avoidance yet. Is your method a straight up, back off and rotate 90 degrees? I was thinking of doing something a little more nuanced like use gyro to make and check small amount of rotation either side, check distance values and make decision on best way to proceed.
hi i would like to ask if it can work with any io expansion shield as i the one i am using has 47 25v vt capacitor and doesnt have the same line as yours
do you have tutorial how to adjust the converter
Cara membuat control tombol di handphone android nya bagaimana
what happens if you dont damage the expansion board and didnt adjust the output voltage of stepdown module to 7 volts?
If 7v is not provided, even if the servo motors work, the spider robot will not be able to lift the whole weight.,
The nano shield is damaged because the 7v is connected from the nano to the 5v out.
@@RobotLk I have another model of shield, do I still have to damage it?
It's also new
The board is damaged Without doing it, give 6 volts from the stepdown module. No problem
hi sir the apk app is not showing the connection
Does the bluetooth module show up in the app?
Is there anyway to contact you because I am going to build it so if I get any problems I can contact you .
+94771489786 Whatsapp
my robot does not work😭😭😭
What your problem?
@@RobotLk It won't move when I turn it on
Dari sekian banyak tutorial tidak ada satupun proyek saya yang.... berhasil...sudah mengeluarkan dana lumayan banyak tetapi selalu gagal...dan akhirnya jadi sampah....😇😇😇 29:09
What's wrong, the spider robot is not working properly?
@@RobotLk ,yes...always error stk 500 when uploading....can you help....??? Help...🙏🙏🙏