Hey thank you. I have been building quads for 4 years this month and I learned some things watching this video, like how to run the motor wires through the protective sleeve. I also like the way you placed the arms after placing the middle plate. You used top-notch components as well rather than using cheap stuff. Great video. I wish i could have seen something similar when I started. 👍👍👍
Thanks for your nice comment. I always continue to develop and research myself. I will continue to share new information and techniques I have learned.
I'm 19, this is literally my dream, to build and fly drones I can't wait entell I can afford to start this hobby! Such an awsome way to spend your timw
This comment felt like you really said it from the heart and kind made me think you are a very kind and good person. just wanted to let that out haha ! have fun flying @greg
Great build! Though i will suggest using flux when soldering, as you want the solder to dissipate evenly through the entire pad to ensure a good connection.
Well most solder used for quadcopter has flux in it already. I think it is most important for rework. That’s when I also use flux pen. And sometimes with micro soldering
Давно шукав відос про збірку 5-ти дюймового апарату для таких задач. Дякую тобі друже за інструкцію. Сам тільки недавно займаюсь цим хоббі, навіть виклав декілька відосів на каналі з польотами в симуляторі.
I've watched this a few times now cause I want to build my own FPV but I'm still confused, lol. Which wire goes where, what setting is set to what? More research is needed but thanks for the great vid. 👍🏻👍🏻
Upgrade the quad to BF4.3 and try the supafly juicemode freestyle preset tune. DJI SBUS fast rc link preset. 48khz BL32 frequency. Also build looks heavy so dynamic idle of 50 should be good.
Yeah, the wires aren't even close to touching the pad, I know they don't have to be in direct contact, but they should at least be CLOSE. That's just held on by a bridge of solder that's ~4mm long. Vibration, heat, and crashes are gonna desolder/break that eventually. Wouldn't take too much aggressive flying to desolder it.
if I have no experience in electronic. if I order those pieces and follow your steps, would I be able to put it all together, mainly the wiring and solding, or it requires some knowledge like in circuits,. Also, how much are all parts +- ? building one looks awesome, and driving it even more I hoppe you can answer my question. Thanks in advance
Wow, Great. But just as you know, a better way for soldering, first put the tip of heater on the place and then use the lead. that way avoid cold joint.
Hello! Avec presque la même configuration, je suis autour des 300gr sans gopro/batterie. Considère un poids de 700-800 grammes avec tout compris dessus
Odlično letenje, edino mogoče bi blo ok kakšna razlaga pri sestavi drona...vem, da ne razumejo vsi angleško in si veliko folka želi v fpv sceno, drgač pa lep clean build :)
when you solder will be better if you put some solder flux to make the base for the solder wire and connection will be much more durable and will use less solder.
Thanx ben zelf beginnend bouwer 😅 haal veel handige dingen wat ik zie uit je video en neem ik mee tijdens het bouwen...alleen heb ik pas een frame gekocht en motors de rest word afwachten en proberen en hopen 😅
RDQ carries a prop tool that looks like a pair of pliers that I use on every installation. They are not super expensive and they work on pretty much all FPV motors.
All Stl Files
www.thingiverse.com/thing:5372785
Que motores sería para 4s
How many prices this monster drone?
for the armguard better use tpu or pla? what the best setting for it?
@@TERBANGFPV 95A tpu
You are very good ! hihi You look like an iron man! Thank you for your video. I'm from Vietnam and I love drones like you
I don't know how much good the Drone is but the one who's flying it is much more better then the drone ‼️
I love how he says you need this electric screwdriver to complete the build..lol. been doing just fine with my $19.99 hex drivers for years..😉
lol. ok.
@@k1ortiadid you comment to your self
Hey thank you. I have been building quads for 4 years this month and I learned some things watching this video, like how to run the motor wires through the protective sleeve. I also like the way you placed the arms after placing the middle plate. You used top-notch components as well rather than using cheap stuff. Great video. I wish i could have seen something similar when I started. 👍👍👍
Thanks for your nice comment. I always continue to develop and research myself. I will continue to share new information and techniques I have learned.
Repacking DJI Air 2S Lithium battery with New Cells ! Made by 88 Eleven Shop ! ruclips.net/video/-xd-MGecKtM/видео.html
I'm 19, this is literally my dream, to build and fly drones I can't wait entell I can afford to start this hobby! Such an awsome way to spend your timw
This comment felt like you really said it from the heart and kind made me think you are a very kind and good person. just wanted to let that out haha ! have fun flying @greg
Great Job!!! awesome video!
Great build! Though i will suggest using flux when soldering, as you want the solder to dissipate evenly through the entire pad to ensure a good connection.
Hello, Thank you for your nice comment and support. I will consider your suggestion in future videos.
Not needed with the right temp/method.
@@CraftChannelYT all price?
Well most solder used for quadcopter has flux in it already. I think it is most important for rework. That’s when I also use flux pen. And sometimes with micro soldering
Давно шукав відос про збірку 5-ти дюймового апарату для таких задач. Дякую тобі друже за інструкцію. Сам тільки недавно займаюсь цим хоббі, навіть виклав декілька відосів на каналі з польотами в симуляторі.
Thanks for sharing 🥰🥰
Big like 👍👍👍
Awesome built video. Clean, concise and right to the point👍👍
ruclips.net/video/uaDd7m5tbO8/видео.html
I love this camera, drone❤❤❤❤❤❤❤❤❤❤❤❤❤❤🎉🎉👍💕👌
Such an awesomeee job on this video 😍😍😍😍😍😍😍😍 keep up the amazing work❤❤❤❤
Helal olsun tebrikler her türlü kayit olsun cekim olsun kalite süper el becerisi ayri katagori kiskandim vallah;))
Just subscribe nice video God bless take care stay safe
Thanks for making this video, nice information
Great Build...!! *Racing Track* is the best part...😍🤞
Seriously 😅🤓
hey really cool video but i wanted to ask what colorful things are over the motors cables they looks very cool
big like 👍👍😍😍
thank you
Tek kelimeyle muhteşem bu kadar profesyonel olabilir resmen şampiyon olmuş
I've watched this a few times now cause I want to build my own FPV but I'm still confused, lol. Which wire goes where, what setting is set to what? More research is needed but thanks for the great vid. 👍🏻👍🏻
Mükemmel bir proje başarıların devamını dilerim 🙏
Love it! 🔥🤙awesome video!!New sub👍
Efmod'u görmek güzel oldu. :)
Elinize sağlık güzel bir montaj videosu olmuş.
Güzel yorumunuz için teşekkür ederim 🙏
Really clean build. Bonus points for not cutting the motor wires!
why shouldnt you cut the motor wires?
@@spaserinio3978 nothing wrong with it, but I stopped cutting them because it makes it harder to reuse the motors for future builds.
Upgrade the quad to BF4.3 and try the supafly juicemode freestyle preset tune. DJI SBUS fast rc link preset. 48khz BL32 frequency.
Also build looks heavy so dynamic idle of 50 should be good.
Sir I think you droped this ❤🔥.
Top video top component ... 👑
very nice love it❤
very impresife but I would worry about power leads :) they are only on side solder joint wonder how long this will last...
Yeah, the wires aren't even close to touching the pad, I know they don't have to be in direct contact, but they should at least be CLOSE. That's just held on by a bridge of solder that's ~4mm long. Vibration, heat, and crashes are gonna desolder/break that eventually. Wouldn't take too much aggressive flying to desolder it.
Nice video 👏
😮 very nice
Franchement superbe,😃👍 bravo ✨
Nice video bro, for the first time i have ever seen a drone build very nit and clean, good job 👍👍
Bravo stari 👍 zelo čisto delo 👏🌞 zdaj pa ripat bande 🤘😄💪
Trông hất hầm hố và mạnh mẽ
Excelent vídeo 👌👍 Great Job 👍👌
Eline emeğine sağlık 👍🏼👍🏼👍🏼
Videolarınızı gördükce mutlu oluyorum işini iyi yapan insanlar varolsun , elinize sağlık sevgililerimle.
woooow very very nice thank you bro.
Great Job! Congrats!
Hi 🤠 I just found your video, very clear view of the putting together process. What is the total cost of this DIY drone?
if I have no experience in electronic. if I order those pieces and follow your steps, would I be able to put it all together, mainly the wiring and solding, or it requires some knowledge like in circuits,. Also, how much are all parts +- ? building one looks awesome, and driving it even more
I hoppe you can answer my question. Thanks in advance
Thanks, it's a great video
Vay karagöl yolu harabeleri 😀 çok iyi bir video çıkmış, parçaları yurtdışından mı temin ediyoruz?
Teşekkürler 🙏 evet tüm parçaları aldığım siteler açıklamada mevcuttur
Really super,amazing,show how much in inr
Have you got 1 price please? Thinks for the super video 👏😍
Полностью не смотрел ролик, так- урывками, но сдаётся мне, что по цене он выйдет как неплохой DJI.
Well done 👌
The stability man😮
Awesome job for your first build !
Вітаю, підкажіть що за підставка під дрон червоненька така на 9.05 хвилині? Дес продається чи робили самі? Дякую.
Thank you so much!!!!! God bless you!!!!!!
Maşallah abi çok güzel olmuş
Awe nothin like a fresh new build. Great work man how do the f60 compare with the F40's for power and flight times? Thumbs up!
They are pretty good, however Xing2s seem to be generally better
@@sus7382 Thanks
Efsane emeğinize sağlık çok güzel 👍
Wow, Great. But just as you know, a better way for soldering, first put the tip of heater on the place and then use the lead. that way avoid cold joint.
what the max time u can flight with it?
iwonder how igot like 20 min on drone whatt kind of battry i must buy
One of the amazing drones of 2022 is the Freestyle FPV Drone.💯
Dumb question,,, so when I download the firmware for my FC in beta,,,, I want the firmware that matches my flight controller correct?
muito top like e inscrito garantido
Great video! Thank you!
I did this build it came out good. How can I add long range antennas? Do I need adapters?
Emeginize saglık mükemmel bir çalışma 👏👏👏
Nice image quality
Buenas, que buen vídeo!! Una pregunta donde puedo pillar las gomitas para los sticks de la emisora! Saludos compañero!😄
Vay arkadaş hemşeri çıktı.Dostum malzemeleri nereden tedarik ediyorsun?Linklerin bir çoğu kırık.Şu an en güvenilir nereden tedarik edebilirim?
Elinize sağlık güzel olmuş
I didn't see the screwdriver you were using can you tell me what is was. the digital battery one
Wow so beautiful.
Nice video, what is the brand of the digital screw driver you are using?
Can you please make a video on programming of drone and transmitter settings separately
Please
I like your mounts for antennas.
how long does this drone fly? and how far can he fly?
Quanta manobrabilidade esse Drone tem aí que incrível isso eu queria tanto ter um curto muito seus vídeos mano Vai em frente você vai se dar bem
Como faz pra comprar com tudo montado so comprar e voar ?
gg for my brine is incredieble good yob :)
Great build! Thanks for share. It just me or it feels a little heavy?
Příliš drahý dron, váha velká, předražený projek, vše na nic. Já stavím je na zakázku a mám už desítky. Napiš mi já ti poradím.
grade die einstellungen brauchen erklärungen, schade, ansonsten ein tolles video wenn es mein stummfilm wäre
muy buen video tengo las ganas de construir el mío jajajaja
Salut quel est le poids du drone avec ou sans batterie et GoPro svp merci
Hello! Avec presque la même configuration, je suis autour des 300gr sans gopro/batterie. Considère un poids de 700-800 grammes avec tout compris dessus
Ωραιο βιντεο θα ηθελα να φτιαξω κατι τετοιο μπορω να ρωτησω ποσο φτανει ολο το build και εαν χρειαστω βοηθεια θα μπορουσα να εχω καποιες οδηγιες
Odlično letenje, edino mogoče bi blo ok kakšna razlaga pri sestavi drona...vem, da ne razumejo vsi angleško in si veliko folka želi v fpv sceno, drgač pa lep clean build :)
Excelente trabajo!
kerenz mas...Tq👍
wow 🎉 thanks ❤
when you solder will be better if you put some solder flux to make the base for the solder wire and connection will be much more durable and will use less solder.
Thanx ben zelf beginnend bouwer 😅 haal veel handige dingen wat ik zie uit je video en neem ik mee tijdens het bouwen...alleen heb ik pas een frame gekocht en motors de rest word afwachten en proberen en hopen 😅
для полудальных (и полудолгих )расстоянии надо семи дюимовый раму и пропеллеры надо!
Source one is a bloody great Frame
Hi, what brand do you use as glasses?
Você vende esse que montou?
Awesome👍
Great build! What is that prop grip thing you were using when tightening the props on called?
RDQ carries a prop tool that looks like a pair of pliers that I use on every installation. They are not super expensive and they work on pretty much all FPV motors.
how much did this cost?
It cost
Great video! amazing explanation.
I only have 2 Kidneys, i think I could sell one for the part list. it is enought?
Great video 👍. At 7:45 at nano rx does it matter the power? I think mine is at 0mw 🤔 should I change it and why? Thank you.
0mw is no output... you cant controll your quad then.
@@thelemonenergy609 i got a Nazgul5 v2 is working fine so far three flights so far. It came out of the box set like that. Hmmm strange then.🤔
Beautiful spot! what frame are you rocking there btw just wondering
You need way more heat on most of those solder joints. The motor joints are all very rushed and the ground pad on the xt60 is not even fully in place.
Harika bir iş . Tebrikler
Is he wind resistant? Will the wind blow it away?thanks 😄
What's the track?? Please give the name. P.s. nice drone