The big question I have is can you put this on a 300 blackout AR if you only run subs through it? Obviously supers would blow it up but I wonder if subsonic 300 blackout is low enough pressure and similar enough the 9mm that it would work.
I’m surprised you didn’t say that you were baffled by how quiet it was 🤣🤣 missed opportunity. Great review. Can’t wait to get my first Q silencer one day.
WOW!! What a super cool and sick modular unit. Very impressed. Great job on the video as well! I really liked the step sequence to get a true appreciation for all of the module configurations... Great job all around!!
glad to see you are still putting out videos, you don't come up in my RUclips anymore. I just turned on your notifications again for the multiple times
Thank you for the video. First time watching your channel. I just got my Q Erector 9. Looking forward to my range time. Just a note about the 147gr ammo you mentioned. I have always used Winchester Ranger 147 gr T series. (RA9T - is the code on the box). This ammo has never let me down. It is a hollow point and therefore more expensive. For training I use Speer Lawman Handgun 147gr. That ammo has never failed me either. I shoot those two brands in all my pistols. For full disclosure I am not a Glock guy but I stand by the suggestions. I hope that might work for you if you decide to try it out. To each his own however and again thank you for the video.
Use a shorty barrel on an ar9, put 2 of them bad boys together under a full length handguard and basically it's like an integral barrel. That would be a sweet set up!
Most gun companies with a threaded barrel option on their handguns will send a second (lighter) spring. This helps weapons cycle with the lower pressure loads, because of the reduced blowback. I had the same issue out of my M9A3. Switched to a lighter spring and it runs all rounds without a stop pipe, or failure to eject.
Wish you could run a sound pressure meter in the lower corner of the screen with each baffle; it would make it easier to understand the changes in sound
I recently received my tax stamp for my Erector 9 was thinking about rattle canning it black. Any thoughts on how this would work? having a suppressor cerakoted can be tricky because of the ATF forms involved thanks for any replies in advance!
Cerakoter here. First of it should be common sense but do not rattle can it. Second find a local applicator, and just talk to him about “hanging out” while he does his thing. Suppressors are just sexy, and a coated one will do his portfolio good. He may work with you and let you hang around the shop. Or the other option find an FFL that has cerakote services in shop. May be out of state.
Packaging? Seriously, who really gives a crap about packaging? Do you keep the packaging? I'm not keeping it, and quite honestly, I'd rather have the price of their product drop 50 bucks and send it to me in a paper bag. Something tells me 99% of the people buying one would feel the same. Maybe if they didn't have to worry about packaging, they would have them in stock someplace, and I could buy one of these damn things, LOL.
Just because your ears aren't ringing doesn't mean it hearing safe, especially with long continuous strings of fire. Even 135db over time will cause permanent damage. Plus if the 2 baffle configuration seems hearing safe you've definitely already had significant hearing damage.
Is anyone else having problems with their Erect9r? I have a new Erect9r, one of the first in black, and I've sent it back for repairs twice now. The first time was damage (a baffle strike) to the cone and edge of the cone of each baffle. They were responsive, sent it back fairly quickly, and took care of the shipping. The second time is for the endcap blowing apart. This was just after getting it back from the first repair and was only about 100 to 200 rounds run through it. Now they don't have endcaps and it will be about 6 to 8 weeks minimum to get it back. Even worse now is that the whole thing needs to be sent in for repairs. so if it is lost in the mail, or stolen, there will be negative ramifications for future NFA purchases. Also, they don't actually manufacture these, someone else does, and they just assemble them.
TS19 barrels are now 40% off! Cheapest they will ever be so head to DCA and check em out 🏴
The big question I have is can you put this on a 300 blackout AR if you only run subs through it? Obviously supers would blow it up but I wonder if subsonic 300 blackout is low enough pressure and similar enough the 9mm that it would work.
I’m surprised you didn’t say that you were baffled by how quiet it was 🤣🤣 missed opportunity. Great review. Can’t wait to get my first Q silencer one day.
WOW!! What a super cool and sick modular unit. Very impressed. Great job on the video as well! I really liked the step sequence to get a true appreciation for all of the module configurations... Great job all around!!
glad to see you are still putting out videos, you don't come up in my RUclips anymore.
I just turned on your notifications again for the multiple times
The intro is everything
That was badass how you started the video. Outstanding
This will go well with my P365 project I've recently conceptualized.
Thank you for the video. First time watching your channel. I just got my Q Erector 9. Looking forward to my range time.
Just a note about the 147gr ammo you mentioned. I have always used Winchester Ranger 147 gr T series. (RA9T - is the code on the box). This ammo has never let me down. It is a hollow point and therefore more expensive. For training I use Speer Lawman Handgun 147gr. That ammo has never failed me either. I shoot those two brands in all my pistols. For full disclosure I am not a Glock guy but I stand by the suggestions. I hope that might work for you if you decide to try it out. To each his own however and again thank you for the video.
Waiting on someone to buy 2 of these and put them together
Use a shorty barrel on an ar9, put 2 of them bad boys together under a full length handguard and basically it's like an integral barrel. That would be a sweet set up!
Demolition Ranch did even better than 2!😁
Most gun companies with a threaded barrel option on their handguns will send a second (lighter) spring. This helps weapons cycle with the lower pressure loads, because of the reduced blowback. I had the same issue out of my M9A3. Switched to a lighter spring and it runs all rounds without a stop pipe, or failure to eject.
Thanks man, you did a great work in this video.
That’s good info though. Having just the blast baffle (or maybe +1) might be ideal for home defense.
Great intro Talon! You can really hear the difference when you string the footage together as well as you did!
Does it come with direct thread? I imagine you wouldn’t need the decoupling device when you get down around 4oz.
Wish you could run a sound pressure meter in the lower corner of the screen with each baffle; it would make it easier to understand the changes in sound
I’d love to see a dB reader on a 9 baffle setup! It’s “movie quiet” 😩
Depends if you’re using a 147 grain or less lol it does jam more at 147 but very quiet
I literally just seen this today at my LGS now I need to head back up there before they close 😂
I would like to see it work on an AR-9! That would be cool as hell!
What hearing pro is that? I need something small like that but everything I try doesn’t work that good
Sei: silencer
my brain: light saber
I just got an E9 and everyone I've shown it too have said the same thing lol
first time watcher and that intro is killer
Make Sunday Gunday Great Again!
Polish the barrel feed ramp, i shoot 147g from 43x griffin barrel/can. Polished the feed ramp to almost mirror not one prob
I could see a special operations soldier carrying a few suppressor baffles simply to quiet the gun a bit and reduce muzzle flash.
Nice Now I'm waiting for a tank suppressor to go stealthy boom boom
That's unpossibly quiet! 😁 Awesome vid and not surprisingly, another great Q product 💪🤘🙌🤙
🤯 Incredible! LOL the steel is louder.
I just got my Q 22lr modular. Using it with my Ruger Charger.....Holy Crap! How does Q do this?....In 22LR it is also very affordable!
What brand was the ammo you used that had so much problems ? I want to stay away from it. Thanks
@SUNDAYDUNDAY how did the diameter work with the optics? Were you able to see the red dot or was it blocked by the can?
HE'S BACK
Thats hard to beat
Thing is so sick
What’s the actual Db? That was very quiet, hope they make grey or black. What’s the pricing.
I'm in the market for a one would you recommend this or the omega 9k ?
Are you shooting subs in these very small conversions of the suppresir
Do the baffles have the industry standard 1.375x24 thread?
I recently received my tax stamp for my Erector 9 was thinking about rattle canning it black. Any thoughts on how this would work?
having a suppressor cerakoted can be tricky because of the ATF forms involved
thanks for any replies in advance!
Cerakoter here. First of it should be common sense but do not rattle can it. Second find a local applicator, and just talk to him about “hanging out” while he does his thing. Suppressors are just sexy, and a coated one will do his portfolio good. He may work with you and let you hang around the shop. Or the other option find an FFL that has cerakote services in shop. May be out of state.
@@fishfleshfowlforage7969 thanks for the reply, your suggestion has been my plan of action that hasn't worked yet
will you be spraying the suppressor black to match the gun and its pretty cool that its interchangeable
No need they just released black
Can moly grease help to ease taking off all the caps?
Similar design to Lone Wolf’s Elimin8r.
Defeated algorithm
Packaging? Seriously, who really gives a crap about packaging? Do you keep the packaging? I'm not keeping it, and quite honestly, I'd rather have the price of their product drop 50 bucks and send it to me in a paper bag. Something tells me 99% of the people buying one would feel the same. Maybe if they didn't have to worry about packaging, they would have them in stock someplace, and I could buy one of these damn things, LOL.
love ur videos!!!!
I was hoping it would keep growing to ridiculously long
Would this work well with a Sig MPX K?
Intro clip got me good! Hahaha
Will this work with 300 blackout?
Oh man! I wish we could use suppressors in California.
Looks like something outta starwars
Also hehe "erector"
Just because your ears aren't ringing doesn't mean it hearing safe, especially with long continuous strings of fire. Even 135db over time will cause permanent damage.
Plus if the 2 baffle configuration seems hearing safe you've definitely already had significant hearing damage.
Huh
What hearing protection do you use?
amzn.to/3hr8qi9
Dang! I wanna give her a spin!
What earplugs are you using?
Does this come in black?
I think there should be another ts43x drop
Dope!!!
Let’s go!
I just understand!!! Its Q voodoo magic
🔥🔥🔥
Your vertx discount code is only 20% off not 25%.
What kind of eara u got
Honest Outlaws twin?
I like it at 7 baffles
I want a blk one but dont wanna back order
Looks like sig modx
What ear pro??
amzn.to/3hr8qi9
shoot some quality 147 out of the shortest configuration to see how quiet it really can be
Very quiet but jams more often no matter how you configure and which ammo. Works well with lighter grains
Do you really "need" the snorkel on your truck?
Do you really “need” anything in life?
😍😍😍
jacket?
www.vertx.com code “talonsei” to save some bucks.
Makes same sound when u bust 🤣
Is anyone else having problems with their Erect9r? I have a new Erect9r, one of the first in black, and I've sent it back for repairs twice now. The first time was damage (a baffle strike) to the cone and edge of the cone of each baffle. They were responsive, sent it back fairly quickly, and took care of the shipping. The second time is for the endcap blowing apart. This was just after getting it back from the first repair and was only about 100 to 200 rounds run through it. Now they don't have endcaps and it will be about 6 to 8 weeks minimum to get it back. Even worse now is that the whole thing needs to be sent in for repairs. so if it is lost in the mail, or stolen, there will be negative ramifications for future NFA purchases. Also, they don't actually manufacture these, someone else does, and they just assemble them.
nice modular unit but that color is going to show stains and look dirty in a hurry needs to be black 🖤
One baffle and a wet wipe and dry
Erector 🤣
I have to keep it hidden from my wife
Why, does it look like a dildo?
You mean baffle strike 9 💀
Its not really fair to call it hearing safe just based on your own subjective comfort level. Your ears might be shot. Suppressor does look nice tho.
Ugliest silencer ever..
Why is this erection silencer looks so ugly?
Too much talking.