Outdated: FlashFloppy Gotek Floppy Emulator for Yamaha SY77/SY99 (STM32-based, see description)

Поделиться
HTML-код
  • Опубликовано: 30 окт 2024

Комментарии • 23

  • @_P_M_
    @_P_M_ 3 года назад +3

    Really well done video. If you ever cover replacing the display for the SY I'll certainly be watching.

    • @cc-sm6eh
      @cc-sm6eh  3 года назад +2

      I'm glad you find it helpful. For the display exchange, there is a video by youtube user Midera I think which I though was pretty helpful.

  • @jarikoskenniska299
    @jarikoskenniska299 Год назад

    Well Detailed, Tnx, Man! ...This gives hope to my SY99

  • @Guttalaser
    @Guttalaser Год назад +1

    Hi... can you tell me something about the DATA and the WAVEFORM cards? What are and what you can do on each one?

  • @chanderbhatia541
    @chanderbhatia541 3 года назад +1

    Great video, very educational.

  • @richardsmith4992
    @richardsmith4992 Год назад

    Hi - Is this method compatible for the DX7 II FD? It uses 720K disk drive originally.

  • @gatosoul
    @gatosoul Год назад

    Great Video, thank you for sharing, any tutorial on upgrading the Backlight own a SY 77 or SY 99, thank you :)

  • @BliterTV
    @BliterTV 3 года назад

    POWER_77 really cool patches :-)

    • @cc-sm6eh
      @cc-sm6eh  3 года назад

      Yes, they are pretty nice :-)

  • @deltekkie7646
    @deltekkie7646 Год назад

    Can you give a link to the adapter board? I have been searching everywhere for it

  • @gatosoul
    @gatosoul Год назад

    THANK YOU ! GREAT VIDEO, Do you have a video for the Ensoniq EPS 16+, Thank you for sharing !!

  • @eliasfernandez626
    @eliasfernandez626 3 года назад

    Hola acabo de poner un emulador usb gotek a un secuenciador kawai Q80ex la cuestion que carga un solo tema o guarda y se desconecta el pendrive, sabrías sobre la solución configuración de jumpers?¿

  • @decaystar
    @decaystar 3 года назад

    you were able to load without making any ff.cfg?

  • @ericgutera7352
    @ericgutera7352 3 года назад

    after doing the image the gotek give me a buzz noise as *error *34 WHAT IS THE PROBLEM ??

    • @cc-sm6eh
      @cc-sm6eh  3 года назад +1

      Hello Eric, unfortunatley, there some context missing in your question. If you google "FlashFloppy error 34" or so, you'll find a discussion about that on the FlashFloppy github issue tracker. It seems that it might be related to the USB stick being prepared wrong. Maybe you'll find that helpful.

  • @ericgutera7352
    @ericgutera7352 3 года назад

    DO U ADWICE AN SPECIAL USB KEY ??or standard is ok with windOWS 10??

    • @cc-sm6eh
      @cc-sm6eh  3 года назад

      I don't think there are any special requirements for the usb thumb drive. It has to be fat32 formatted, so the maximum is I think 32gb. But you'll likely struggle to fill up even 1gb for a SY77/SY99 thumb drive as 1 GB fits something like 1450 720kb disks. So you probably already have something that works. In my opinion, the main thing to consider is whether you'd like to have a short usb thumb drive - like the one I have used in the video. It looks slightly more elegant than something old and bulky.

  • @chanderbhatia541
    @chanderbhatia541 3 года назад +1

    I am inspired by your detailed video. I like to prepare an emulator for Yamaha PSR 1000. Can you kindly direct me to purchase the small oled display and the tiny speaker?

    • @cc-sm6eh
      @cc-sm6eh  3 года назад +1

      Hi, unfortunately, the way to obtain these devices depends a little on where you live. The usual suspects to look for these devices are ebay, amazon or aliexpress. What you'll need are 0,91" 128x32 I2C oled SSD1306 modules. They are typically found in the context of Arduino devices. The speakers are just typical piezo speakers. Before starting with the modifications, I suggest you look around for information on the PSR 1000 and flashfloppy. Those floppy emulators do not work with all devices, they may need specific firmware versions (e.g. for Quickdisk devices) and they may require different jumper settings. Also, make sure you are aware of the alternate way (search in youtube for "gotek dfu programming") to flash the Gotek floppy emulators via USB cable. It may save you some time. Good luck!

    • @chanderbhatia541
      @chanderbhatia541 3 года назад

      @@cc-sm6eh Thank you very much for your guidance. I have ordered most required parts and will download software
      for PSR1000. I am expecting to complete this in the next two months. Regards.

  • @spiritabsolut5765
    @spiritabsolut5765 8 месяцев назад

    Hey dude, im from the netherlands and I need my yamaha sy77 to be modded with a floppy. I hear you are german, would you be down to help me if I brought you one ? I would pay for your time ofcourse !

  • @latengocomoburro
    @latengocomoburro Год назад

    36:36 Culture Beat - Mr. Vain