Это видео недоступно.
Сожалеем об этом.
Kranzle 7/122 Pressure Washer, Mosmatic Gun and Lance, Hose Reel Wall Mount Installation.
HTML-код
- Опубликовано: 31 дек 2018
- This video is a run through of wall mounting a Kranzle 7/122 TS, 20m hose reel, quick release Mosmatic gun and lance, PA snow foam.
Ha, ha... I wonder where he got the idea. Mosmatic UK can't even copy the gun/wand properly. That's a janky version.
Completely inspired by your work over the years Matt, so thanks for all the effort. 18 months ago when I was putting it together, supply in the UK was limited, and was far from the expectations I had from watching your work. The gun and lance are heavy (due to the oversized fittings) but the quality is there and they perform very well. I think you'd be most disappointed with the hose reel, options there still remain limited. As you've moved the game on, I suspect the gap has grown vs supply options in the UK. Please send "Matt says my wand is Janky" T-shirt so I can wear it in my next "fixing my Janky wand and gun" video.
No one really does what you do in the uk unfortunately ! I use a Suttner
ST2600S EASY PULL QRC X 3/8"F SWIVEL gun
ST001 LANCE WITH ST9 VENTED HANDLE, 800mm, 1/4"M, WITH ST10 NOZZLE PROTECTOR AND BEND
ST73.1 FOAM NOZZLE + 2L BOTTLE
ST75 BLUE FOAM HEAD for through the pump foam
Stainless automatic hose reel + 40 twin wire hose 740402201
I make a stubby lance using a Kew spigot and st10 nozzle holder
All jetted to suit the 3.2gpm @ 1500 psi or 15055 jets
The pressure washer is a dirtdriver Sapphire 1500 hot water diesel electric machine running 3.2gpm @ 1500 psi and water from cold to 150 degrees C. We use autosmart detergents
Snowfoam pro
Actimousse hi foam TFR
Smartwheels acid free wheel cleaner
PowerHD tar remover
Aquashine hydrophobic rinse coating
Highline style universal dressing
20/20 foam spray glass cleaner
Bubblegum blast air / fabric freshener
And that’s as good as it gets here
@@cuthberm Lol, always will have 1 up on og etc...not a yankee!! Ps, good/clean install
Could always buy your and get ripped off mtm all the way no brass tat in them guns obsessed with ripping people of with over priced products clown 🤣🤣
Genius use of clamps to hold it up on the wall to mount.
I built a plywood pressure washer station a while back too. It has saved so much time!
Cool build
That is one seriously good install. So methodical, so clean. A must for any man cave. Well done, great job and great to watch!
Thanks, appreciate the feedback
@@cuthberm You're welcome, and further proof that I need one of these machines in my life!
Very nice setup! Its interesting seeing how different the materials are 'over there'
Great video which help me out mine together, used as a reference as I went along. Would be nice to see an quick update video, any changes made, what you’ve noticed etc. Just done mine and so far so good 👍🏼
Now that is a setup I would love, thanks for the walk through 🙏
Great job Sir. Hope you get many years of enjoyment with your new set up. Cheers from Canada. 🇨🇦👍
I'm looking for a kranzle to upgrade from my karcher k4, didn't know which to choose. You have a similar water pressure to me. Your K7 looked to handle it well, looks like I've found my answer. Thanks. Great video.
Great set up. Trying to put together a similar set up.
By the way if you don’t have it already Carscope sell a 3/8 plug for the end of the hose to stop the dribble 👍
Great job! Don't forget to remove water from the pomp on winter time.
Brilliant video; the machine is pretty quiet and a great space saver.
Beautiful set up
Thank you!
you guys live life so happily all the technologies you have as well neat and clean places unlike in india everytime we spent so stressful even if take out my car there is no parking places always has bribe polices etc. gods know what else we have to face next day, even in occasion there is no one else apart from your family will give you a proper gift really frustrated out with this life of mine
A bit late to the party here but a great install. Has given me some good tips to do my own install. Keep up the good work
Cheers
Glad it helped
Very nice and clean set up. I like the detail . Great video
Nicely done. Thanks for the video.
That set up looks great.
Matt from ObsessedGarage eat your heart out! This is how it's done. No procrastinating; no mind changing; no waffle; quick and to the point and edited. Thanks Mr C but get a saw-guard would you?
Angela Slaney hi thanks, appreciate the comments, in fairness to Matt i did a lot of thinking before starting this! I did have the saw guard, but thought it was safer that i could see the blade clearly and the wood as it travelled through, as crazy as that now sounds! Its a scary piece of kit, needs a lot of respect.
@@cuthberm Nice video. Yes, very true. If MattMoron @Obsolete Garage did some more thinking that would prob help his cause.
@@jermanehoowse4618 yeah... I mean he only has 100k+ subs and a flourishing business. :-). Maybe he should plan and think it out more
No idea why you've got 8 dislikes. Great video and setup.
Thanks, probably people with Karchers😂
@@cuthberm 🤣
@MrCTV amazing set up. Second time over referred to this video 😁
Thanks, much appreciated
A lot of work went into that .. looks great well done buddy..
What a neat jet wash setup it looks amazing 👌👌👌👍👍👍
Thank you 🤗
Super tidy solution!
Will definitely be copying your layout in future, Matts is very clean but mega bucks $$$
Great build! Im loving the SS fittings you have on the gun.
Nice wee set up👍
Brilliant Job very professional
Great setup, found this vid whilst searching for Kranzle HD7 which I’m thinking of buying.
Nice setup. I just did a similar system myself. I ended up ordering a Cox reel after trying a lesser brand. I am happy with the Kranzle although their packing job left a lot to be desired. They did however stand behind their product. Thanks for the video.
Hi. Are you based in the UK? If so, where did you source the Cox reel? I’ve searched far and wide to no avail.
@@Junaid786Shadpur I live in Canada I ordered it off Amazon.
@@Junaid786Shadpur to live happily with detailing you have to live in America 🤣
Nice installation.
very smart setup
Wow top job mate!
Thanks
Very nice setup!
I just bought a K7/122TS and it's AWESOME! This setup is amazing, I'm extremely jealous! You'd hate to see my 'setup'...
Nice work !
Nice build.
Nice build. Enjoy your set-up mastercraftsman
Excellent video. Thanks for sharing. God bless.👌👍💐
Nice tidy installation, the only minor points I'd reference are the plywood back board will ripple and delaminate in time if left untreated. And the power socket being far to close to a water supply,
Hi Thanks for the feedback. I did treat the ply @ 9:54, as for the socket, I'm no electrician, so welcome any advice, but as any source of water output (the trigger) is always going to be 2m vertical and 4m horizontal minimum away from the socket and unit, it's surely safer than the units intended application, which is to be sat on the floor, closer to water spray etc?
Great setup very impressive job
Thank you very much!
Proper professional set up 👍🏽
Hi excellent build.. just a question where did you buy the clamps to fix the kranzle to the wood.. would be grateful for size and type.. thanks
Hi, search "Pk of 10 RUBBER LINED P CLIPS STAINLESS STEEL" on eBay, item number 261701764673, for the kranzle legs they are 20mm diameter, you'd need bigger if you wanted to fit over the rubber section of the legs. Thanks
Nice install, best quality components!!
Thanks
Great job. I'm doing that setup in my van. I love it.
Hi, thanks for the comment, good luck with yours
Quality build that I am considering myself
Hey bud, I've installed a very similar set up. Can you advise what size Anti Vibration P Clips you used to secure the Kranzle to the shelve? -
Hi, thanks, yes they are 21mm, but that’s only big enough to go round the metal part of the leg, not enough to go round the rubber part. There’s just enough exposed metal at the front, before the rubber starts to get a clip there.
Hi
Really enjoyed your vid...great idea but wished you linked the items used so I could purchase the items myself. Many thanks
Wonderful i just bought one, it is great !
Great set up .. I like it 2 much
Great Video and thanks for posting. Can you please tell me the size of the probe you replaced on the foam cannon. I need to do the same thing for my mosmatic handle. Thanks in advance. David
Hi great setup , really enjoyed the video you wouldn’t happen to have a link for those shelf brackets please
Nicely done but why no hot water connectivity to the Kränzle?
Hi, Because I’m only removing initial dirt and rinsing, which isn’t improved by using hot water.
Very nice set up. What snow foam are you using if you don’t mind me asking ?
Hi, thanks, meguiars hyper wash for the foam
Hi. Hope you don’t mind me asking. I’ve also got the mosmatic gun and lance. However, I can’t seem to get the maximum pressure out of it. Are you able to get up to 120 bar with this setup using the mosmatic gun and lance? I use the 40 degree nozzle.
Hi, I've never actually checked the pressure as the gauge isn't visible when in operation. I'll try and have a closer look next time I wash the car.
I'm assuming the machine is new:
1) do you have enough water supply (flow rate) to feed the machine?
2) Have you adjusted the red pressure release valve? It's factory set to allow the most pressure.
3) you have a 40 degree nozzle, but what orifice diameter did you get, you can't increase the pressure of the machine by using a smaller nozzle, but you can marginally reduce it with a bigger size, I went for a size 03, which is slightly over.
Hope this helps, I'll see what pressure I'm showing and let you know
Mr C TV thanks for replying. I’ve had the machine for over 1 year. The unloader valve is set to maximum. When I use the Kranzle gun/ lance I get the full 120 bar. I think it might be the orifice. When I bought the gun from mosmatic.co.uk I think they sent me a 040 size orifice nozzle. I bought some additional nozzles from eBay and have since found out that they are probably size 035. I’ve just ordered a size 030. Let’s see if this increases the pressure. Fingers crossed 🤞
I believe you should be using a size 4 on the nozzle. And a 1.25 in a foam cannon
Nice install bud I noticed u had a karcher in the background is the kranzle worth the extra cost because there not cheap are they
Nice job, wonderful
Hi can tell us what snow foam using as seems
Nice thick foam what orifice size in foam gun are you using
Thanks in advance
Hi, it’s Meguiars Hyper Wash, the foam cannon is a genuine PA one, thanks
Great Build!
Good job mate.
Nice build
Hi great setup I'm building mine and was wondering is it OK to leave switch on, on the washer and power on from the wall socket as my washer is high? Cheers 🏴
Hi, I'm no electrician, maybe somebody else could comment, but I can't see an issue myself. The machine does cycle for a second when initially powered on (assuming you've got the auto stop version). If I was in that situation I'd just buy a good quality socket and crack on!
@@cuthberm thanks for your reply.
Great video.
After having this 7/122 for a few years has it been good? Powerful enough for washing your car?
Yes very good and very happy with it
7/122 nema snage da gura 120 atm na duze staze Mnogo bolja varijanta je 10/122 za stacioniran uredjaj Uredjaji sa 1600 Wati mora da rade pod punim opterecenjem ,motora na 120 bara a to nije lekovito za motor .-kickdown i pored toga sto su Kranzle motori motani sa C klasom lak zice.Crevo visokog pritiska je namotano na malom precniku koturace a to nije dobro za crevo pogotovo kod nize spoljne temperature Greska je kupovati puromate ispod 2,2kW..Imam Kranzle i to je vrhunska Long Time maxina ali 20 metara creva- hose reel -visokog pritiska na 1,6 kW to je pred infrakt za motor .Truck-krstarice su dugacki 12,6 metara. NE znam sta ce 20 metara ?
Hi, I'll try and respond the best I can having used google translate. The specification of the 7/122 says the maximum hose length is 20m, so I'm happy with that. I couldn't buy the 10/122 as you suggest, as I don't have 10 litre/minute water flow at the mains, so I would be "under feeding" the unit, causing premature wear - again as per the Kranzle specification. thanks for the comment and feedback.
Thanks for the video. Amazing setup! I love the holders you built. Do you have a link or description for that hose reel?
Hi, thanks for the feedback, it’s appreciated, hose reel was from eBay, a seller called qwashers
What's the name of the handle that you used to rinse the car? Does come with it or I have to buy it separately?
Tek Hi, the gun and Lance are made by Mosmatic, which I bought separately, in addition to the standard ones that come with the kranzle. I’ll have a dig around and see if I can find the part numbers.
Great job Mr C. I have a 1152TST and contemplating in getting the mosmatic lance with the quick release, would u know what quick release types and fittings i would need. thanks
Don't bother getting mosmatic guns treat yourself and get all mtm set up stubby gun extension lance and snow foam shop around to mtm the daddy in my opinion mosmatic mat obsessed with over pricing his stuff 😮😂
How are you finding your 3.0 nozzle size? Im using same but thinking of running 2.5 nozzle
And how much pressure you set up ?
How on earth does one end up with so little water flow on tap? Is that a UK thing?
Awsome video. Can 7/122 is using for car washing commercial purpose ?
3.0 tip will damage your kranzle and wont give you enough flow you need to get a 4.0 40 degree white tip for optimal pressure and water flow gpm out of your kranzle
you have a nice setup bro i like it
Hi, thanks for the feedback, but interested to understand why you think I should be on a 4.0 and not a 3.0
@@cuthberm because the kranzle machine is rated for 4.0 size tip using it with 3.0 will give you less water output aka gpm more pressure which could be dangerous for car paint and you over working the machine not using proper size tip which is not good for the pump
ideal spec for car washing 1000 psi pressure 2.0 gpm which kranzle is the best machine will give you that output with a 4.0 tip thanks for the question
I've was referencing the nozzle charts on kranzle.co.uk and using the rating of the machine and my mains waterflow to arrive at a 3.0. Having said that I do hear your view and have re watched some of Matt's video's. I've now ordered some 4.0 nozzles and I'll have a proper look at the difference and what readings I get, I should do another video on it. I can say I'm able to easily hold my hand less than 12" in front of the nozzle, so I don't believe I'm completely wrong with my choice, but we'll find out when the new nozzles arrive.
Hi cTv.. have you tried nozzle 4.0? Its better or not? I buy a kranzle hd7/122 too.. and i very thanksfull for your video.. good job sir
Hi, yes I did, 4.0 is not correct for this machine. The spec on Kranzle own website for this specific machine is 2.8. I did buy a pack of 4.0 and I get no increase in flow rate, but a reduction in pressure vs 3.0. Which tells me a 3.0 is correct for this machine combined with my input flow rate. Thanks
Will this work on my 15amp circuits ?
Hi. Hope you don't mind me asking . Where did you buy your mosmstic hp gun, lance and nozzles from? Also how much did it cost? Thanks.
Hi, no problem, i bought it from ebay uk, the listing is still up today, search for “mosmatic HP gun with swivel and lance”, £185
Love the set up!! how do you rate the liquid sealant you used instead of PTFE tape?
It was the only way I was going to get the taps to line up, tried countless times with the tape and couldn’t make it work. Had no issues at all since I did it 18 months ago and have done another outside tap with it
Brilliant set up, just watched to ask you is the pressure washer suitable/powerfull enough to pressure wash a driveway and patio etc?
Not really enough flow. 10/122 or 12/130 for that.
Quick question, Do you lose pressure with the 20 m hose ?
Do you do installs for clients?
Hi, would you like to review the new MJJC foam lance Pro?
tidy job mate.
Hope there's no copyright as I'm thinking of copying it this week. 😁
0:44 I thought it was the sound of a gaz pressure washer
I’ve got the same set up as you and the quick connector into the gun is too big and heavy . Get the ones from obsessed garage. They are half the weight.
ryrybread220 Hi, yes agreed the main QR between the gun and hose is bigger than needed, and heavy.
Mr C TV if you need the ones I ordered let me know and I’ll send you the link. It’s much better with the OG ones and didn’t cost that much even with postage from America.
Hi there nice set up.
Do you have a link and part number for the cosmetic gun and changible jets by any chance ?
Hi search on ebay for Mosmatic gun and lance, the listing is live today, nozzle will depend on the QR size you go with, but pressurewasherpartsuk on eBay have them all.
Impressive job! What ratio soap to water do you load your soap cannon with?
I use about 2 pumps on the soap dispenser, and then top up with water to about 3/4 full.
An excellent how to guide thanks so much. I am going for almost this exact same setup that you have of the Kranzle K7 TS and a direct hoses 20m manual hose wall mount reel but I am going for an Italian made MV925 short trigger gun instead with the Mosmatic OG spec Bent wand combo just to keep the cost down a little more. Can you recommend where to get the braided hose connector pipe from that runs from your Kranzle plus the heavy duty shelf brackets please? I have a large sheet of 2mm aluminium checker plate I think I am going to use as a backing plate on the garage wall as it should look very neat. Thanks
Hi, thanks for the feedback, the braided hose came from screwfix, it comes as a 2 pk, its a speed fit flexible tap connector 15mm x 3/4". The shelf brackets came from eBay, search "heavy duty shelf brackets handmade" supplier was VDS_fabrications. Good Luck
Mr C TV thanks very much I will look them up. Which hose reel did you go for, was that the one from direct hoses? Thanks
Mr C TV my Kranzle is arriving next week, just sourcing the m8 thru bolts and plywood. Can I ask what size p clips you needed please? Thanks
Hi, I’ve pulled up the purchase on eBay, but I can’t see what size I ordered, I bought 2 larger sizes for attaching the feet, and then a smaller maybe 8mm for the cable.
Mr C TV okay thanks do you have an item number for the supplier I could try? Thanks again. Looking forward to trying it. I am using mine with a 220l water tank so will be interesting to see how it goes
Great looking kit, hows it holding up now?
Perfect, no complaints at all, everything is performing the same as day one (which it should do given the cost of everything). Thanks
Hi I shared your video!!
Great install, really tidy.
What are your thoughts on this jetwash?
Nearly 12 months on I’m really happy with it, performs exactly as I wanted, and stores away when not in use allowing full use of floor space
Nice
great set up i have the k10 with 15 meter hose reel mine seem very load as ive mouted on wooden garage i have the makita leaf blower lol where u buy the trigger gun
dylanson hi, thanks for the feedback, i bought the lance package from ebay, the seller was mosmatic UK.
cheers
Do you get any problems with chemical stains on your tarmac at all?
Hi, no not really, only washing 2 cars once a week, and don’t need too much heavy stuff until winter
Mosmatic gun, kranzle pressure washer but u gonna use a cheap AF foam cannon?
No my friend, it’s a genuine PA foaming Lance, the original and still the best 😂
@@cuthberm need to add the mtm to that set up mate....
Hi,
Great video.
Being UK based, where did you source the quick fittings, hose and gun?
Thanks in advance
Hi, thanks for feedback, the mosmatic gun, wand and quick fittings were from a single eBay listing, I’ve just checked and it’s still live now, just search mosmatic, the hose was from Qwashers, also an eBay listing, the nozzles were from a third eBay seller!
@@cuthberm Brill. Thanks for all that! Quite envious of your set up!
@@cuthberm , great setup. How’s the hose/reel going? I’m thinking of buying it off same ebayer. I don’t like stiff hoses like karcher supply but yours looks good and flexible. Would you still recommend it?
Hi, yes going well, although I’ve just ordered new o rings for the reel, due to a very very minor drip. Keeps everything tidy and away in the garage, so would be without it
Great job mate. what is your opinion on the kranzel over the Karcher. I'm thinking of ordering the 10/122 TS to replace my Karcher K4 compact. but just a bit concerned its not going to make much differents?
Hi, thanks for the comment, I think the biggest difference you would see would come from the flow rate on the kranzle, and that’s what counts when you are trying to rinse large surface on a car. I’d not appreciated the difference higher flow makes.
That’s cool. I will let you know how I get on! 👍🏻
Is this Mr. C from The Shamen?
Sorry to say I’m not Richard West of off the Shaman, pretty sure he’d be very happy with my choice of jet washer though😂
@@cuthberm I think you're way cooler than him. You're into cycling and pressure washers. Epic video BTW! Merry Christmas!
Where did you get that pistol and.connector set?
Mosematic UK
Not bad @tall', looks good from my house lol
Is that the og spec mosmatic
Hi, no, this was done about 18 months ago, so pre the OG spec.
where did you get the kranzle?
An online seller cleantec
Mr
How many db 's ?
71db according to the instruction manual
Tight how the hell you get in you car 😳
It’s not great and it’s a struggle every day, but I can’t leave it on the drive or it would attract too much unwanted attention.