2007 Toyota Highlander Hybrid Spark Plugs, Valve Cover Gaskets, Spark Plug Tube Seals Replacement P1
HTML-код
- Опубликовано: 1 окт 2024
- This video will show you in detailed on how to replace spark plugs, valve cover gaskets, and spark plug tube seals in complete detailed and step by step. There is no need to take your vehicle to the dealership or the mechanic shop. This video will show you on how to do all of that in your own garage and you will save a TONS OF MONEY on labor cost.
This video will be in 2 parts to make the video short and in detailed for you guys.
So please enjoy the video and I hope that you will learn how to do it, like, subscribe, and share if you find this video helpful to you.....thank you very much.
Thank you for being so thorough with filming! This was a great help!
Thank you very much for your kind words. 😊 That meant a lot to me, and I am glad that my videos are helpful to you and hopefully will be for other viewers out there as well. 🙏
All I know is, those 2 bolts in the back of the manifold took me an hour to find until i found your video and yet this V6 still piss me off 😂 😤😡🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬 basically me trying to change the this hybrid spark plug 🤣
I know my friend, I feel you bro.
After removing those two bolts, I would leave them off for easy access for the next spark plugs replacement. 😊
One of the better videos I've ever seen. Job well done. Question: Is this the same 3.3 engine that's in my 2008 Toyota Highlander Hybrid? Thx
Thank you so much my friend.
I believed it's 3MZFE in your 2008 Highlander Hybrid as well, but please double check on that as well.
Very helpful, detailed video. Do you disconnect the battery first?
Thank you. You really don't have to disconnect the battery when you are replacing the spark plugs or valve cover gaskets.....it's just not necessary in my 30+ years experience of working on cars......but it's a good safety feature though just in case someone is trying to turn the ignition key.
this is the best video of this i have ever seen, you just saved my ass with this, helll YEAH
Thank you so much my friend 🙏
@@MrBeeHS im mid change, the strut bar for the 2008 is different apparently, it houses the wiper motor, , i assume i just disconnect and take whole thing out, its not a bar but like a housing brace -thing... any advice thanks
Yes, that is correct! On your year model, you need to remove the wiper motor assembly and get it out of the way for easy access.
@@MrBeeHS ok, i tried one bolt, didnt budge, i think i might try disconnecting the throttle body from manifold to see if i can get around that way otherwise i might be screwed.
Ok cool, keep me posted my friend.
Thank you so much for detailed instructions
You are very welcome 🙏
Part 2 of 2 will be released soon.
@@MrBeeHS would you please let me know if we have to clean the fuel injectors for this car? i have looked in youtube but have not found anything. Thanks
You don't need to clean the fuel injectors for this car. It's not necessary at all. You can, but it's a waste of money and time. Just use the fuel injectors addictive that you add into the gas tank when fueling up. Do that about twice a year, and you'll be fine.
@@MrBeeHS cannot wait for this. I was going to do this tomorrow but will wait for your part 2 thanks
where can i download the maintenance manual??, the one of doing actual repairs not the glorified one that comes with the car.plz help thank you
I highly recommend buying Hynes car manual for you model. You can find them on eBay or Amazon. I hope this helps. 🙏
i also have question for you. Do we have to clean the fuel injectors for this car? i looked on youtube and have not seen anyone providing instructions how to clean them. thanks
It's not necessary to clean them. You can use the fuel injectors additives that you pour into the gas tank when fueled up, and that's all you need it.
What's the video for the valve cover gasket?
Part 2 of 2....valve cover gaskets and spark plug tube seals will be out soon....approximately next week.
This is the most garbage engineering toyota has done, and i got to do this service. Im selling this car
Yeah, I am on your side for that one my friend. It was the best engineering for that time and now they finally improved it....it took them long enough though 😂
@@MrBeeHS hahaha yea im gonna check a 4 cylinder one
@@nelsonlopez879 check on the newer model one because they totally redesign the motor and more gas efficient
@@MrBeeHS oh okay cool thanks, im gonna check the video on how to service it