If you have a vintage chrome-plated watch on which the plating has failed and is flaking off, can you remove the old plating and re-plate with Rhodium? No idea what metal the casing really is, sadly.
Hi Scott! Here's what our Tools Tech Team says: the short answer is yes, you can. Removing the old chrome may prove a bit challenging, but once that is complete, the main concern is getting the newly revealed surface as clean as possible. It can’t be too clean. Beyond this, the plating process should proceed as normal. Hope this helps! --Stuller Marketing
Chrome can be removed in hot caustic solution,check Google,also used for old metal bumperbars, if it is chrome then it should have copper plate under it. if nickel you are going to need a acid solution to electricaly etch it away. The shinier the undelayer the better the Rodium finish. and plate a bit longer then 30 seconds! obvious that the item has been worn in a wearing environment.
No, rhodium has to plate over another metal like nickel or copper. But it comes out better when the piece is polished shiny. It’s all based on ratio and the shine on whatever you’re plating is going to be the shine you get with rhodium, nickel or gold
OFF course it will wear out... you need the item made be in that material in oreer in not wear off, the advantage is you can polish the times you want you get always a good nice look. thast why i nevel buy electroplatted items, like gold platted, rodium plateg, galviunesed etccc...always inox, gold , silver etc,, in original materilas... electroplatted are fake stuff, soon or later they are done and ugly.
That's correct. The plating process only sticks to the metal, not to gemstones. I've had my 43 year old diamond solitaire, set in 14kt white gold replated numerous times since I first got it, and the only way the diamond has ever been affected is that it always comes back to me EXTREMELY clean and sparkling! That's because of the thorough cleaning and polishing process the entire ring is subjected to prior to it being replated. Being cleaned thoroughly in the ultrasonic cleaner removes all traces of "muck, mud, crud," and whatever else it may have been subjected to since the last time it was cleaned, (which is frequent, in my hands, as I cannot tolerate jewelry which does not shine and sparkle like the day it was first sold) and then there is also the renewed reflective surface of the metal that helps brighten up the whole thing as well. And of course, nobody would ever have their diamond jewelry replated like this if it did ANY kind of damage to the most expensive part of the piece!
Plating costs so much because Rhodium solution actually contains micro-particulates of precious meals. The amount of rhodium solution shown in this video contains over a thousand dollars worth of gold, it's just in tiny particles waiting to be bonded to a metallic surface. Additionally, in it's liquid form rhodium is highly acidic and gives of carcinogenic vapors. What the video did not highlight is the ventilation and breathing protection aparati needed to work with rhodium SAFELY.
@@laleki9 - Plus there are things like overhead costs just in running a jewelry store, and a good portion of this involves paying people to do all the work that's needed to a piece before you can even start plating it. You don't just stick a piece of jewelry on the wire, dip it for a minute, and call it done. First it needs to be examined to be sure that there's no repair work that's required before you even start with the plating process. Plating is the absolutely last thing that should be done to a piece of jewelry, so it is extremely wasteful to plate something before it's been determined if there are say, prong tips that need to be redone first on any of the stones that might be in a piece. If you try and polish a piece thoroughly before even examining it, and there are broken/weak or even missing prong tips, you could end up sending tiny stones spinning off into space! Then you've got expensive repairs to do before you ever get around to plating anything. There's a hundred or more issues that need to be eliminated before you start in on the plating process, and a pair of well trained eyes attached to a pair of equally well trained hands don't come cheap! Materials are only part of the cost picture of paying only $40 to take good care of your jewelry.
Personally I would make sure that cook rings were stable and not wobbly. I dread to think that you would use gold plating solution containing cyanide on this set up.
Hi there! Andy The Tool Guy says: The process is rhodium not gold plating. Rhodium should be not heated and the liquid should move so you pull electrodes from the entire jar.
For things a lot of America rodeum plate it means it's electric plating it's going to fade and come off now they are making cheap gas jury low quality gold and played in it because they couldn't make it right so they had to plate it if you make your jewelry right you don't have to put a plate on it
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Music Video)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
Now that's the way to proper rhodium plate a piece! No cuttings corners. Should last 2 years with medium wear.
Thank you so much Stuller people!!! 🙏🏼💍💎⚒️
You don't have to stir the powders to dissolve, just drop it in there?
Hi there is it possible to Rhodium plate a bezel rub over Diamond ring?
Thanks
Do you sell the Plating equipment?
Can a 14K white gold watch be rhodium-plated? Maybe just dip each side in up to the watch face?
I'dont understand why some body use amps settings and other voltage settings in tank plating
0:49 The Stuller Bench told me 2 tablespoons and it's been working perfectly.
hi, i would like to ask, how to make a rhodium white gold solutions? do you have a lecture video on how to do it? thanks..
Is it posible of rhodium coating on titanium metals ??
The liquids should be room temperature? Is it advised to heat any of the liquids? I've heard either one will work. Thanks ^-^
The only liquid you should heat is electro clean. If using silver, then use nickel.
Kitane dino me livid espayr hota h
If you have a vintage chrome-plated watch on which the plating has failed and is flaking off, can you remove the old plating and re-plate with Rhodium?
No idea what metal the casing really is, sadly.
Hi Scott! Here's what our Tools Tech Team says: the short answer is yes, you can. Removing the old chrome may prove a bit challenging, but once that is complete, the main concern is getting the newly revealed surface as clean as possible. It can’t be too clean. Beyond this, the plating process should proceed as normal. Hope this helps! --Stuller Marketing
@@StullerInc Thanks!
Chrome can be removed in hot caustic solution,check Google,also used for old metal bumperbars, if it is chrome then it should have copper plate under it. if nickel you are going to need a acid solution to electricaly etch it away.
The shinier the undelayer the better the Rodium finish. and plate a bit longer then 30 seconds! obvious that the item has been worn in a wearing environment.
I am in Pakistan how may I get this machine and chemical?
Yes
Very nice
Very nice and beautiful
Dope 🔥🔥
Hello, I have one simple question: The wire on min. 2:50 is aluminum?
Thank you!
Guillermo Solís cooper
@@Anna_Svas_Tone -- Copper?
Shari D57 yes, it’s the best wire for connecting. It’s white cause it’s been used already. Normally it’s a yellow copper color.
it's gold, she says it's gold
Plz tell me company information
Hi. To plate with rhodium, do you need to remove the diamond first?
Samé doubt frm here....
No. The diamond will be fine.
no need......
Omg no, lol
No, rhodium has to plate over another metal like nickel or copper. But it comes out better when the piece is polished shiny. It’s all based on ratio and the shine on whatever you’re plating is going to be the shine you get with rhodium, nickel or gold
Can you rhodium plate gold plated rings and if so will the gold still rub out during regular use/time?
I home Bluetooth speaker
What would happen if rhodium was tested on a diamond selector 2?
Why would you use a Gem Tester to Test A Medal that makes no sense
it would say it's not a diamond
Qiero ese juego todo completo del vídeo
Can you plate of lab created sapphires?
You're plating the metals involved, not the stones. They are not affected by the plating process.
Nice 👍
If you rhodium plate yellow gold, you will turn it white. But the rhodium will wear off depending on use.
OFF course it will wear out...
you need the item made be in that material in oreer in not wear off, the advantage is you can polish the times you want you get always a good nice look.
thast why i nevel buy electroplatted items, like gold platted, rodium plateg, galviunesed etccc...always inox, gold , silver etc,, in original materilas...
electroplatted are fake stuff, soon or later they are done and ugly.
What kind of wire are u using in the video and i don't think it is gold
Ohoud Gfly copper wire
it's gold, she says it's, rewind video
i assume the plating will not stick to diamonds mounted on jewelry??
Mitch Plumlee nop :) the stone shine like a stars!
Ann
Anna WWB
That's correct. The plating process only sticks to the metal, not to gemstones. I've had my 43 year old diamond solitaire, set in 14kt white gold replated numerous times since I first got it, and the only way the diamond has ever been affected is that it always comes back to me EXTREMELY clean and sparkling! That's because of the thorough cleaning and polishing process the entire ring is subjected to prior to it being replated. Being cleaned thoroughly in the ultrasonic cleaner removes all traces of "muck, mud, crud," and whatever else it may have been subjected to since the last time it was cleaned, (which is frequent, in my hands, as I cannot tolerate jewelry which does not shine and sparkle like the day it was first sold) and then there is also the renewed reflective surface of the metal that helps brighten up the whole thing as well.
And of course, nobody would ever have their diamond jewelry replated like this if it did ANY kind of damage to the most expensive part of the piece!
What's the concentration of the initial rhodium solution?
NeZVa 100 ml + 100 ml + 700 ml water
I want to buy Rhodym machine
Hi there! Please click the link in the description, which will send you to the proper page to purchase the machine. Thanks! --Stuller marketing
👍👍👍👍👌
this is awesome...I thought they polished it like a car. I had no idea how simple it is. Now I just want to know why its 40 bucks!
Plating costs so much because Rhodium solution actually contains micro-particulates of precious meals. The amount of rhodium solution shown in this video contains over a thousand dollars worth of gold, it's just in tiny particles waiting to be bonded to a metallic surface. Additionally, in it's liquid form rhodium is highly acidic and gives of carcinogenic vapors. What the video did not highlight is the ventilation and breathing protection aparati needed to work with rhodium SAFELY.
interesting, thanks! D. Mateo Flores
@@laleki9 - Plus there are things like overhead costs just in running a jewelry store, and a good portion of this involves paying people to do all the work that's needed to a piece before you can even start plating it. You don't just stick a piece of jewelry on the wire, dip it for a minute, and call it done. First it needs to be examined to be sure that there's no repair work that's required before you even start with the plating process. Plating is the absolutely last thing that should be done to a piece of jewelry, so it is extremely wasteful to plate something before it's been determined if there are say, prong tips that need to be redone first on any of the stones that might be in a piece. If you try and polish a piece thoroughly before even examining it, and there are broken/weak or even missing prong tips, you could end up sending tiny stones spinning off into space! Then you've got expensive repairs to do before you ever get around to plating anything. There's a hundred or more issues that need to be eliminated before you start in on the plating process, and a pair of well trained eyes attached to a pair of equally well trained hands don't come cheap! Materials are only part of the cost picture of paying only $40 to take good care of your jewelry.
Shari D57 This is the case.
Just did my and cost 125$ 😢
Easy...
Pls rhodium name
Hi, if you click the link, you can shop the items in the video. Thanks! www.stuller.com/video/watch/50516/?RUclips
I want yo 1 botal rhodium
Personally I would make sure that cook rings were stable and not wobbly. I dread to think that you would use gold plating solution containing cyanide on this set up.
Hi there! Andy The Tool Guy says: The process is rhodium not gold plating. Rhodium should be not heated and the liquid should move so you pull electrodes from the entire jar.
Hii
bahasa indonesia attuh..
rhoduna j1 made in germany is the best
ice WALK not any more! :)
How pure is the rhodium made in Germany how pure is the rhodium made in Germany
What percentage of rhodium is in rhodium Foyle's
*रोडियम प्लेटिंग व्हाइट गोल्ड पुरा फॉर्मूला*
I have the crude of it. Who wants to buy
Rhodium 600ml... and water 💦m
Who thinks this stuff up
Chemists.
For things a lot of America rodeum plate it means it's electric plating it's going to fade and come off now they are making cheap gas jury low quality gold and played in it because they couldn't make it right so they had to plate it if you make your jewelry right you don't have to put a plate on it
pure platinum anode works better
sure money bags
the rhodium makes the white gold alloy look like plastic.. can't wait for it to wear off the necklace i have
That's no white gold cold trewed solver gold 75% and silver the rest of the 100% and tip poor while zuurstofwater over youre gold when it turns cold
Or you cud turn the amounts AROUND aground
Hillo whatsupp numbir send me