hello my distant friend. thank you for the great video. please tell me how to organize the output of helical interpolation for sinumeric 840. there you need to specify the turn command and the number of turns.
Hello thanks for the information and the video, I think that this process is similar fot wire edm post processor? Im loking for a post processor to Agie cut 200D but with the chance of make tap, could you help me? Greetings.
Hi~ bro. I have experienced In postprocessor output cutter compensation but I don’t have experience output it on shop documents, because we don’t use it generally.
Sorry. It’s not work (output) in shop documents, I’m trying to output mom_cutcom_status , mom_cutcom_mode, mom_cutcom_adjust_register etc.. but it can’t until now.
Dear Sir, Plz help me: Now I wan to output method in NX CAM to NC file. 1: if I select Mill_ROUGH when I create program it output : (rough) 2: if I select Mill_SEMI_FINISH when I create program it output : (SEMI) 3: if I select Mill_FINISH when I create program it output : (FINISH) 4: if I select DRILL_METHOD when I create program it output : ;(DRILL)
It’s my turning post. But can’t output canned cycle. Good luck. NX CAM - How to create Customized 2ax Turning fanuc_post With NX POST BUILDER & TCL in 18 Steps .#1 ruclips.net/video/stH8FieRCRM/видео.html
Hi~ there’s some postprocessors in each posts. 1.3axis mill : ruclips.net/video/VP12qR32E0s/видео.html 2.2axis postprocessor: ruclips.net/video/stH8FieRCRM/видео.html Thank you 🙏 😊
반갑습니다 구포행님입니다
Thank man❤
Good
Thanks Sir
Good afternoon, what is happening, when postprocessing the file, the H00 is always set to zero, how can I solve it...
hello my distant friend. thank you for the great video. please tell me how to organize the output of helical interpolation for sinumeric 840. there you need to specify the turn command and the number of turns.
This method is only generating postprocess output for Non cutting moves it is skipping all the cutting toolpaths
Please help
Thanks
Hello thanks for the information and the video, I think that this process is similar fot wire edm post processor? Im loking for a post processor to Agie cut 200D but with the chance of make tap, could you help me? Greetings.
Thank you for your message. But I don’t have any experience with Agie cut 200D. 😬
My bro How can I do. cutter compestation(left and right) on shop documentation
Hi~ bro. I have experienced In postprocessor output cutter compensation but I don’t have experience output it on shop documents, because we don’t use it generally.
I’ll research it About that. But i’m not sure if it work out. Anyway I’ll try it. Have a nice day.
Sorry. It’s not work (output) in shop documents, I’m trying to output mom_cutcom_status , mom_cutcom_mode, mom_cutcom_adjust_register etc.. but it can’t until now.
good video sir , please upload twine spindle mill turn post
Hi~ i wish I could. But I don’t have any experience twine spindle mill turn. Sorry 😐
You so funny, this conversation is awesome. 😂
Dear Sir, Plz help me: Now I wan to output method in NX CAM to NC file.
1: if I select Mill_ROUGH when I create program it output : (rough)
2: if I select Mill_SEMI_FINISH when I create program it output : (SEMI)
3: if I select Mill_FINISH when I create program it output : (FINISH)
4: if I select DRILL_METHOD when I create program it output : ;(DRILL)
Hi friend. 🤗 I think it’s possible. (But I’ve never been do that). And I’ll try it Monday. Sorry for waiting.
@@nxcadcampostbuildertutoria4058 Thanks for support, plz help me, that because Im trial that but it difficult, I Korea have NCBrain, do you no that.
Hi I'm trying to find it but i can't yet. It's not easy to me. Sorry for can't help.
@@nxcadcampostbuildertutoria4058 Hi, i trying buy $mom_oper_method but I can't make custom command
I saw your comments now. I’ll make it tomorrow morning.
Do you know how to add g28 x0 y0 z0 ( home position) with M30 at end program ?
Hi~ how about watch this video it’s similar with your case. ruclips.net/video/aHSQEg8v3kk/видео.html
Do you have a post processor heidenhain 410 nx?
No. Not yet. I’ll look for it.
From where i can download this post builder
how to download postprocessor from post hub?
I TRIED ITS NOT WORKING
sir can you make a exaple for sinumerik 840 d 3 axis or you have a post processor for it if you have please download for me. i need it.
I’ll look for it. And I’ll send you if i find it.
Let me know your email address.
@@nxcadcampostbuildertutoria4058 Thank you very much sir. my email is cilingirs@gmail.com
@@nxcadcampostbuildertutoria4058 I'm need a fanuc post processor,can you send me please....
Hi~ bro. You can download my post here. ruclips.net/video/VP12qR32E0s/видео.html
can you send turning post processor link _latest
It’s my turning post. But can’t output canned cycle. Good luck. NX CAM - How to create Customized 2ax Turning fanuc_post With NX POST BUILDER & TCL in 18 Steps .#1 ruclips.net/video/stH8FieRCRM/видео.html
Do you know, how can i delete 'N' at program ?
Sure. Insert MOM_set_seq_off at Top of the program. Like next link 6:45 ruclips.net/video/9oSBNHPIG7A/видео.html
@@nxcadcampostbuildertutoria4058 oh, thanks bro
i found that, delete all N+number at next video
From where i can download this post builder
Hi~ there’s some postprocessors in each posts.
1.3axis mill : ruclips.net/video/VP12qR32E0s/видео.html
2.2axis postprocessor: ruclips.net/video/stH8FieRCRM/видео.html
Thank you 🙏 😊