I’ve had my Shadow 2 compact for a couple of months now and it’s such an awesome pistol! Have put out a few videos so far, but on my way to a 1K round review of mine. In about 500 rounds I’ve only had 1 malfunction so far, a bad failure to feed that pushed the bullet back into the case. Not sure what caused it. I’ve also noticed the trigger to get smoother with more rounds through it. My guess is that anyone that handles and shoots these will love them. Great video!
Brother thank you so much my friend I am interested in purchasing a two compact.and you are the only person or channel whichever you prefer to show and explain the decocking of thispistol I've watched 30 videos prior to yours. And no one demonstrated that quarter cock position when the trigger is released and I thank you so much forshowing that cuz I just couldn't wrap my head around CZ not having some sort of method for decocking this firearm without a decockingbut no other channel showed that technique and I appreciate it so so much thank you and you have a subscriber and have a good day and keep it coming brother.........
I have had my S2C for about 6 months and have experienced a continuous failure to feed issue. I have 10 magazines, and it fails with them all. It starts to happen whenever the pistol gets warmed up so after about 50 to 100 rounds of shooting. It did this from day one. When I take it home from the range and clean it (which I do after every trip to the range), it works fine for the first 50-100 rounds. Then once it stats to get a little dirty from shooting it starts to fail to feed. Starting off as 1 every mag to eventually every round. I have about 3k rounds through mine as I have tried to identify the problem myself. Thinking that it may be picky with ammo, I tried everything from cheap FMJ range ammo to +p hallow points defensive ammo with manufacturers like S&B, Magtech, Hornady, Fiocchi, Speer Gold Dot, Federal HST, Blazer, Remington, Remington, PCM, and Sig SAUER Elite. I didn’t notice any difference. I suspected the recoil spring. I called CZ as I couldn’t find a recoil spring on their website for it. They said it uses the same spring as the P-10C, and sent our out to me under warranty to avoid me sending the weapon back. I already had a P-10C but didnt mention that and awaited the new recoil spring they sent. However I immediately swapped out the spring with my P-10C and went to the range and it still had the issue. I then, waited for and got the new spring and tried that, still had the same issue. Then I suspected the feeder ramp, because it always seems to get caught on the ramp, and would be remedied for a short time by cleaning. So I switch from regular gun oil to a gun grease, no success. Then I tried polishing the feeder ramp, also no success. So I then sent it out to be done professionally, and still it would fail to feed. I love the weapon when it works, but i cant use this as a EDC with it continuing to have a failure to feed. I have finally sent it back to CZ so they can look at it. Im even considering purchasing a second one, because they said it takes about 8-12 weeks for the turnaround. So now im just waiting. Like I said, I love the way it shoots, just wish I didnt have this failure to feed issue. 😓
@RT-fq3tp hopefully CZ can get the issue figured out. I had a gun once thar even after 3 times sending it back, it still didn't fire right. The company ended up just sending me a new gun and that one was great. Maybe that's what will end up happening with you.
I’ve had my Shadow 2 compact for a couple of months now and it’s such an awesome pistol! Have put out a few videos so far, but on my way to a 1K round review of mine. In about 500 rounds I’ve only had 1 malfunction so far, a bad failure to feed that pushed the bullet back into the case. Not sure what caused it. I’ve also noticed the trigger to get smoother with more rounds through it. My guess is that anyone that handles and shoots these will love them. Great video!
i just got a used one coming in hopefully that trigger is smoother than I already know it is.
picked one up and by far its so much fun to shoot. love it
You got some good groups 2nd time around. Got Sp01 9mm Stock. I hear cajun gunworks have great upgrades.
Brother thank you so much my friend I am interested in purchasing a two compact.and you are the only person or channel whichever you prefer to show and explain the decocking of thispistol I've watched 30 videos prior to yours. And no one demonstrated that quarter cock position when the trigger is released and I thank you so much forshowing that cuz I just couldn't wrap my head around CZ not having some sort of method for decocking this firearm without a decockingbut no other channel showed that technique and I appreciate it so so much thank you and you have a subscriber and have a good day and keep it coming brother.........
@@SteveThomashefskyBig glad I could be of help.
I have had my S2C for about 6 months and have experienced a continuous failure to feed issue. I have 10 magazines, and it fails with them all. It starts to happen whenever the pistol gets warmed up so after about 50 to 100 rounds of shooting. It did this from day one. When I take it home from the range and clean it (which I do after every trip to the range), it works fine for the first 50-100 rounds. Then once it stats to get a little dirty from shooting it starts to fail to feed. Starting off as 1 every mag to eventually every round. I have about 3k rounds through mine as I have tried to identify the problem myself. Thinking that it may be picky with ammo, I tried everything from cheap FMJ range ammo to +p hallow points defensive ammo with manufacturers like S&B, Magtech, Hornady, Fiocchi, Speer Gold Dot, Federal HST, Blazer, Remington, Remington, PCM, and Sig SAUER Elite. I didn’t notice any difference. I suspected the recoil spring. I called CZ as I couldn’t find a recoil spring on their website for it. They said it uses the same spring as the P-10C, and sent our out to me under warranty to avoid me sending the weapon back. I already had a P-10C but didnt mention that and awaited the new recoil spring they sent. However I immediately swapped out the spring with my P-10C and went to the range and it still had the issue. I then, waited for and got the new spring and tried that, still had the same issue. Then I suspected the feeder ramp, because it always seems to get caught on the ramp, and would be remedied for a short time by cleaning. So I switch from regular gun oil to a gun grease, no success. Then I tried polishing the feeder ramp, also no success. So I then sent it out to be done professionally, and still it would fail to feed. I love the weapon when it works, but i cant use this as a EDC with it continuing to have a failure to feed. I have finally sent it back to CZ so they can look at it. Im even considering purchasing a second one, because they said it takes about 8-12 weeks for the turnaround. So now im just waiting. Like I said, I love the way it shoots, just wish I didnt have this failure to feed issue. 😓
@RT-fq3tp hopefully CZ can get the issue figured out. I had a gun once thar even after 3 times sending it back, it still didn't fire right. The company ended up just sending me a new gun and that one was great. Maybe that's what will end up happening with you.
😅
Hi man !! in the half cocked position does the safety works ?
@javiersp01 yes it does. The safety works on both half and full cock. When the hammer is fully forward however, the safety will not go on.
@@SmoknJaysGarage Thanks man, same in my old 2006 cz sp01
1st!