Nice presentation and solution to the defect... thank you... in my car, Whirpool fl-5085 aa+, it does not draw water from the supply hose.. I disassembled the solenoid valve (it is single, not double), I also disassembled the valve the rubber inside is not broken, the holes are unclogged, the spring and the rod are good, the small plastic filter is clean, the value of the rod actuation coil is 4.12Kohmi (in the manual it is 3.8K + or - 10%) the hoses access to the detergent drawer are not cracked or clogged, the water pressure at the entrance to the solenoid valve is high...I turned it on from the button, the programmer button (the big one on the front panel) moves a little, after which nothing happens the car...the power light is on but that's all it does...the carbon brushes on the motor are about 4mm long, the drum moves easily (manually, after I turn it off from the button)...the shock absorbers and the springs the tubs are in good condition, the door closing contact works... the service code on the label is 857050810770... what do you advise me to do? I wish you good health and many happy customers
Hello to all of you. Looking for someone who may have an FL 5105 washing machine working. I would like to have a photo of the top of the detergent tank where there is a red arm connected with a wire to the program selector. I may have accidentally knocked out of the right position of the adjustment arm that controls water inflow into the machine. Please help me out. Thank You
Nice presentation and solution to the defect... thank you... in my car, Whirpool fl-5085 aa+, it does not draw water from the supply hose.. I disassembled the solenoid valve (it is single, not double), I also disassembled the valve the rubber inside is not broken, the holes are unclogged, the spring and the rod are good, the small plastic filter is clean, the value of the rod actuation coil is 4.12Kohmi (in the manual it is 3.8K + or - 10%) the hoses access to the detergent drawer are not cracked or clogged, the water pressure at the entrance to the solenoid valve is high...I turned it on from the button, the programmer button (the big one on the front panel) moves a little, after which nothing happens the car...the power light is on but that's all it does...the carbon brushes on the motor are about 4mm long, the drum moves easily (manually, after I turn it off from the button)...the shock absorbers and the springs the tubs are in good condition, the door closing contact works... the service code on the label is 857050810770... what do you advise me to do? I wish you good health and many happy customers
I absolutely love this machine, I've had one which belonged to my grandfather but it burnt out in 2017, my childhood machine
I had that same machine about 3 months ago
De jól néz ki az a Gorenje szárítógép
Jaja de van még pár db Gorenje száritom!
Majd lesz videó róluk ?
Mulțumesc ❤
Vreau instrucțiuni de utilizare
Hello to all of you. Looking for someone who may have an FL 5105 washing machine working. I would like to have a photo of the top of the detergent tank where there is a red arm connected with a wire to the program selector. I may have accidentally knocked out of the right position of the adjustment arm that controls water inflow into the machine. Please help me out. Thank You
What problem had ?
The program didn't go all the way.
program capacitor problem 1uF !!