Dumbfounded on how easy it is after seeing this! I feel like we’re going to start seeing ads for , “ air suspension companies hate this guy “ just got explaining how much you can save and how EASY it really is to go with a DIY set up. THANK YOU !
I think this is a good explanation video to get knowledge out there, but the guy knows what he is doing. Most of the interest I come across is people trying to bag their cars for less than the cost of a quality coil system, which is not the way to go. If you have experience, you can make any system work.
Good to do what you need to put bags. Doesnt take lots of money to do something custom. Not all are haters for the price. You're saving lots of money, but it's going to cost in quality and maintenance. Those expensive setups have better compressors, manifolds, and valves. Manual valves is a cheaper and easier install, but really it's all depends on the parts and routing. I.e. fittings, air lines. Really depends what you want to do with it..
you just made mine as well. I have a 2017 Hyundai Elantra and i would like to get a lower stance on a budget and eventually move up to The E leveling system in the future so you just showed how i can do that on ah budget and eventually reach my goal bit by bit!
Brotha you are actually goated for turning me on to this. Ima splurge a little just for the ride quality and warranty and get raceland bags, but everything else Im doing myself with 2 compressors it came out to $1,400 WITH the name brand bags 🔥
Thank you for this explanation, looking at bagging my 87 escort and I’m having a hard time justifying a $2000 suspension setup on a $900 car, these air switches are exactly what I was needing to keep it simple and cheap. Thanks!
I'm slamming my jaguar xj6 and I've been looking for kits bit honestly my truck has bags so I think I'm definitely going to air my jaguar on bags. My mercedes is hard lowered on adjustable coil overs. But I think air is the way concerning the cost. ...cheers for the simplicity of the system setup.
thank you bro this video helps a lot i just bought a kit last week ago and everythings in there so yesterday i decided to install them and i have notice that the accuair ecu were bad so instead for me buying a new management like 3p or another accuair management bro right now i would rather choose go to this route now since you just improve to this video that this will work and you said have them for 3 to 4 years now thanks a lot bro 🤝 give some love to this channel 👍👍👍👍
Shoots braddah, thanks for the info. Didn't know it could be done so budget and to hear that it's more reliable than i thought. I'm preferential to mech setups vs electric in general
I had mine on half " water ball valves, 3/8 line with brass compression fittings from hardware store, lot cheaper than quick connects. I ran 220psi in my system all day long, untill I could afford some proper parkers back in the day 2001
Thanks for this helpful information man I’ve been looking to bag my car but it’s always to expensive but now thanks to this video I can I’m defiently subscribing now and smashing that like button
Luis Cheong the ride quality on my setup is really close to stock, a lot of people don’t know how to dial in their setup which is why they ride so bad, airlift is affordable but this is a cheaper alternative if you can’t afford it
Hey, i have an A4 2010 with stock suspension now, what else do i need after i buy all the bags, air tank, hoses, management etc. Do i need to get coilovers too?
@@nicholasrinehart3634 i just wanna make sure that the bags would fit around the stock shocks replacing the springs. Because in the video he mentioned it will go over your "coilovers" so i was confused
Good job man thank you!!! You inspired me..I will try to do the same on my mustang!!! I will buy parts one by one cuz I don’t have the money right now but great ideas and cheap..and I have seen many (old school) people use these valves..I think they should be fine and after you get the hang of it it will be easy to use too!!!
Quick question man, I ended up getting OCD bags for my BCs, I’m wondering about a pressure gauge for the bags? Like how do I know how much pressure is going to the bags?
Same here, i have a 40 year old S123 with the self leveling suspension thingie in the back and the pistons is leaking bad and theyre not made any longer since like 20 years back... this would really sort that thing out!
Hey so I’m running this setup but what I’m worried about is overfilling the bags, how do you avoid doing that? I just don’t want them to pop. I’m not running a pressure gauge
Trying to figure out if you need aftermarket coilovers for the front bags or if you can use the stock struts. I'm betting there's some modification of the stock struts, if you can use them. If you're using coilovers, that's more to the cost of this, too. Not a bad video, but that part is kind of unclear.
How much to get a shop to install this? Mainly because i dont have a grinder to smooth out any bolts. Also are there any tools needed to install them apart from screwdrivers, ranch and the grinder?
VivifyProductions labor depends on the shop, I’ve always done my own work so idk how much it would be, as far as tools you would need basic hand tools as well as a welder if your fabricating bracket instead of buying already made brackets
what I did with my set up, where I now I will be driving my car with the manual set up, I align the car on that set up. generally you will not be driving the car at it's lowest... you only low ride for cursing or for shot periods at ah time!
Does it matter what size gallon tank you use? I dont have much space in the party car and that 5 gal is HUGE for me lol. What does the size difference change exactly? Thank u btw for this video
Draydel tanks size doesn’t really matter. The more air you store the less the compressor has to run, if you air and down a lot you’d want a bigger tank but if you don’t play with it too much you should be fine with a smaller tank
NOJIRI GARAGE my man! I figured, but thank you for clarifying! I’m currently rebuilding my pop up party car- @leboomin. It’s gunna be even crazier because of you bro thank you
I guess if you wanted Peace of mind, you could get uas bags, the compressor and an accuair controller? Would definitely run coilovers. Though. I guess the pros of air sleeve struts would be more clearence? But those prices are the cons I guess.
John Cangieter Its really about what you can afford, Uas and coil overs are cheaper than air struts but are bulkier also need to dial them in as far as dampening and psi goes if you want a good ride quality, each car is different so it’ll take a little fiddling, for management if you can afford airlift then I say do it, the presets and rise on start are cool functions to have
Super inspirational! Was gonna order a kit from ebays chasis tech. But looking at this Im gonna piece together my own kit. Any tips for a 2004 Ford Expedition?
That's all great info and all but the real money saver seems to be getting your girl to do the work! At most my wife will bring me out some nice cold water and in this Texas heat it's a lifesaver! Nice video. How is the ride compared to stock?
Joshua Belaski eBay sells a complete kit which includes 5gallon tank, 440cc compressor, with relay with wiring and pressure switch for $129. You can buy bc coil replacement for $315 per a corner and bags that thread on specially to any bc coils for $250 a bag. It seems like a lot but if you’re on a budget it helps because you don’t have to buy it all at once.
@@CARSHOPBLOOM can u send me link to get the lines and fittings? I live in jamaica and pretty much no1 here is running them so i plan to do it on a civic coupe i plan on buying
Hey man great vid, just want to ask you...i have a vw polo vivo 9n3 and has the same suspension setup as your XB, so i wana know will the brackets be a bit different as i have the ordered the air house rear bags as well same as you..any advice would be welcome.
@@bradsailer7739 hes trying to say if the front bags are on the same valve the car could possibly lean since the air can shift from one bag to another, esp when turning. This can be solved by having a check valve that would not allow that to happen. Its recommend to run all 4 sides independently
Common misconception, but you can't run a check valve in-line to a bag. It would store the air in the bag, but prevents the return path...+ buying 2 check valves with fittings, etc. is going to run the cost of a second valve for a 2 corner system. It's issues like this that deceive people into thinking they can DIY most of their own air systems.
@@josephspellman2698 If you put 4 checkvalves, you would have to use 2 paddle valves for the front and 2 for the rear. One valve for inflating and one for deflating. But you deffo need checlvalves, or at least big ass anti roll bars.
Hey man glad I ran into this video bcuz I’m looking for cheap air suspension. But I don’t know what I actually need. I have a 2017 civic si. Maybe you can help me piece together what I need
Just ordered my setup and realized the paddle valves i ordered have the 1/4 barbed fitting instead of the disconnect style in video..will they still work or should i not use em?
Mr. Blaine, how are you sir? Great video and VERY informative. I have a question sir, I have a 2015 Honda cr-v 2wd with over sized wheels and tires and they rub a little bit in the rear when I have passengers on the back seats. I would like to know what route I should take to lift the rear of my car? Would I just need air bags and would they fit the stock rear struts or do I need aftermarket struts with air bags already installed in them or would it be cheaper to buy aftermarket struts and then buy airbags for those new struts? I don't need the gauges or a tank or anything like that just a Schrader valve in the back so that way I could just air them up at a gas station wherever I know I'm gonna haul people around. Again thank you for the video and keep up the good work sir, take care my friend. Thumbs 👍up on your video.
William Santiago in your situation I would just get helper bags, you still run your regular suspension but you can fill the bag up when you have a load. They use them in truck that tow to lift the rear from sagging
Do you know where I could find some rear airbag brackets for 2013 Audi S4. All the kits are $400-500 with the bags & brackets. I just need the brackets???Thank You
Hey bro, nice job! do you think i can go ahead with the same project for my audi a4 b8 ? do you recommend ? if you can told me what i need to buy its should be very appreciate because all your amazon link was dead. thanks and enjoy the life !
I’ve got a Mitsubishi diamanté 1993. It comes with factory air. Can I fit after market bags to make it lower? I have a set of Tein coilovers. Can I get bag to go over he coilovers to replace the springs? What do you recommend? Thanks.
Hello bro, Great job over there! Im wanna bag my car too, because its impossible to find coilovers under 1300USD without delivery... So where i can buy this switch? Can you link it?
Hey dude I have same set up as you but it’s with D2 Coilover airtekk bag conversion (18 Accord). My bags will inflate but will not deflate. they will only deflate when when I remove the 2 airlines from the paddles switch. I have only 2 paddles one for the front and one for the rear.
Probably a stupid question but I'm gonna be running air lift bags and this kind of manual set up with it. I see how the air gets from the tank to the bags but when u air out where does the air go if the lines only fill the bag? Does it feed all the way back into the tank?
awesome video! I am finally piecing together this kit. can you specify the part number for the front and rear bags? The link only has the fronts im assuming? please and thank you!
Darryl Sooknanan the rear are called “air house” from universal air. This works for 350z if you have any other car please check to see if fitment works for your car before buying
@@CARSHOPBLOOM awesome, thank you for such a fast reply! yes i have a 350z which this set up will be going into. if all goes well, i would like to do the same mod on my 18 camry. it looks very cost effective.
The bags would offer a smoother ride quality tho. Paid $1000 for BC racing coilovers but the ride quality is shitty. If I run over a dime I feel it. Great stance tho, if that’s all you care about.
Ok I want to bag my mk4 Jetta in the back only, because I'm making it a Ute and I just want it to sit level. Would the manual setup be the way to go? The bag kit is around 600$ , but these controllers appear to cost almost double that ! I can't see paying that kinda money for it to automatically sit where I want at the touch of a button. I'm a noob , what else should I study up on in the air world ?
Great for cars that don't really have aftermarket suspension setups available. Wondering if you could run bags on stock struts if you don't have coils?
LTMC Media you can convert struts to coilovers using kits then put the bags on instead of springs, will save a fortune doing it like that instead of a one off named brand kit
Yooooo man do you have a install vid for the manual air Management? Can't find a good one. Also how you can the air hoses. I have the convertible Z and I think it's gonna be a lil more difficult
Matt Williams I have vids on mounting the bags to my coilovers on my channel but this video shows how to put everything to tether minus wiring a pressure switch which if you google is really simply. As far as routing the air line I ran it under the car following the brake lines
Hey bro.. love all these haters.. talking about handling and shit.. you shouldnt be hitting corners and drifting if ur doing air anyways.. but thats what good shocks are for.. bound and rebound.. i could see this working perfectly on some aggressive shocks like koni’s etc.. i had a quick question though about these paddle valves.. when you dump/ air down air is just coming out of the actual valve it self im assuming? Could you run an exhaust line so you dont hear the dump inside the cab? Thanks in advance bro..
So from the tank you don’t have to run a bunch of individual hoses out you just need one ? And split it or just for the video you have one in to show ?
Dumbfounded on how easy it is after seeing this! I feel like we’re going to start seeing ads for , “ air suspension companies hate this guy “ just got explaining how much you can save and how EASY it really is to go with a DIY set up. THANK YOU !
Haha! no worries man, just sharing some knowledge
All the dislikes are people who spent $3000+ on their setup and then saw this video 😢😡
Larry haha. Yeah man!! Just tryna help people save money & do it themselves.
I think this is a good explanation video to get knowledge out there, but the guy knows what he is doing. Most of the interest I come across is people trying to bag their cars for less than the cost of a quality coil system, which is not the way to go. If you have experience, you can make any system work.
@@CARSHOPBLOOM I just bought mone hope the bags fit my 87 cutlass
No cause that’s how much it cost when you add the other 3 air bags
Good to do what you need to put bags. Doesnt take lots of money to do something custom. Not all are haters for the price. You're saving lots of money, but it's going to cost in quality and maintenance. Those expensive setups have better compressors, manifolds, and valves. Manual valves is a cheaper and easier install, but really it's all depends on the parts and routing. I.e. fittings, air lines. Really depends what you want to do with it..
You just made my year!! 700 for air suspension!! Yes I will do it soon. Thank you for this info
Alfielle Z No problem, it all just depends where you buy the parts but it’s pretty affordable.
you just made mine as well. I have a 2017 Hyundai Elantra and i would like to get a lower stance on a budget and eventually move up to The E leveling system in the future so you just showed how i can do that on ah budget and eventually reach my goal bit by bit!
plus coilovers
Did it?
Did you do it
Would be nice if you’d make how to wire it and install.
Thanks bradda
Any update if he has made this video?
Brotha you are actually goated for turning me on to this. Ima splurge a little just for the ride quality and warranty and get raceland bags, but everything else Im doing myself with 2 compressors it came out to $1,400 WITH the name brand bags 🔥
That’s what I’m talking about, you know the basics and just upgrade where you can! That’s awesome man!
Thank you for this explanation, looking at bagging my 87 escort and I’m having a hard time justifying a $2000 suspension setup on a $900 car, these air switches are exactly what I was needing to keep it simple and cheap. Thanks!
Thank you finally someone take it straight to the point for a person on a budget Is not trying to sell us a bunch of stuff
I'm slamming my jaguar xj6 and I've been looking for kits bit honestly my truck has bags so I think I'm definitely going to air my jaguar on bags. My mercedes is hard lowered on adjustable coil overs. But I think air is the way concerning the cost. ...cheers for the simplicity of the system setup.
No problem, good luck with the builds!🤙🏽
The second hand market and weekend warrior modders thank you
great video. lots of usefull information. i just found an old air lift v1 and am piecing it together for my crx
Adam Boyd Nice!
This is going to start my 2020 off with a bang.
ewok 🤙🏽🤙🏽 do it bro!
3 months later.... BOOM Covid-19! Lol
ooh, Just when I was looking at lowering springs.
I’d like bags where I just manually inflate them just like my tires
thank you bro this video helps a lot i just bought a kit last week ago and everythings in there so yesterday i decided to install them and i have notice that the accuair ecu were bad so instead for me buying a new management like 3p or another accuair management
bro right now i would rather choose go to this route now since you just improve to this video that this will work and you said have them for 3 to 4 years now
thanks a lot bro
🤝
give some love to this channel 👍👍👍👍
Shoots braddah, thanks for the info. Didn't know it could be done so budget and to hear that it's more reliable than i thought. I'm preferential to mech setups vs electric in general
colormelife same, this setup was super reliable! Mahalo for the support🤙🏽
I had mine on half " water ball valves, 3/8 line with brass compression fittings from hardware store, lot cheaper than quick connects. I ran 220psi in my system all day long, untill I could afford some proper parkers back in the day 2001
Thanks for this helpful information man I’ve been looking to bag my car but it’s always to expensive but now thanks to this video I can I’m defiently subscribing now and smashing that like button
Been thinking about bagging my 01 cavalier cause lowering springs sucks for me so I'll be following you for better set up thanks
3/8 line instead of 1/2 ? And if your gonna use push lock fittings people please go with brass an not that crap plastic !
steel sledge I’m running 1/4 lines, I agree with going brass fittings although these plastic Ptc fitting are going on to 3 years no leaks
Blaine Nojiri your lucky lol I can’t get plastic to last on these big rigs for more than a year .
@@CARSHOPBLOOM braddah what I need to put in my Chrysler 300? My suspension is stock. Mahalo in advance
MOPAR 300 eBay get some cheap kits or even on bagriders website
@@CARSHOPBLOOM ill check it out. Where you from? I from nalo but live in Washington state now. Aloha
this gets the job done if you want to just bag your car and dont care how it rides.. but airlift is a very affordable kit.
Luis Cheong airlift doesn’t make kits for every car & building a kit is usually cheaper than most kits.
Luis Cheong the ride quality on my setup is really close to stock, a lot of people don’t know how to dial in their setup which is why they ride so bad, airlift is affordable but this is a cheaper alternative if you can’t afford it
Blaine Nojiri i like your setup. In my case, i can not afford, 3.7k for airlift...
Airlift is definitely not cheap for the average person. Including the labor cost unless you do it yourself.
airlift is far from affordable
Hey, i have an A4 2010 with stock suspension now, what else do i need after i buy all the bags, air tank, hoses, management etc. Do i need to get coilovers too?
No
VivifyProductions if u buy coilovers then there’s no need for air suspension. Just go static.
@@nicholasrinehart3634 i just wanna make sure that the bags would fit around the stock shocks replacing the springs. Because in the video he mentioned it will go over your "coilovers" so i was confused
Good job man thank you!!! You inspired me..I will try to do the same on my mustang!!! I will buy parts one by one cuz I don’t have the money right now but great ideas and cheap..and I have seen many (old school) people use these valves..I think they should be fine and after you get the hang of it it will be easy to use too!!!
Kostas Sarakinos no problem, thanks for watching🤙🏽
I would like to go more basic. Air up each bag manually with a tire valve.
was that a joke?
Nice one bro! I have a g35 coupe, would your exact set up work the same way on my car?
u know where i can buy this stuff tryna bag my evo
I wanna bag my shit after watching this but i drive a bucket, bagged bucket here we go.
Nice Z I just retired from Nissan North America and I was the first person at the plant in 2003 to have one.I'm 🤔 GTR.
Quick question man, I ended up getting OCD bags for my BCs, I’m wondering about a pressure gauge for the bags? Like how do I know how much pressure is going to the bags?
Wow that's a great price ! Have to look into it now for my 07 Accord
Bags on coil over replacing it’s springs?
What size bags for a little hatchback?
I have a S class merc that is driving me mad could this solve my problem what would I need to convert my friend
Same here, i have a 40 year old S123 with the self leveling suspension thingie in the back and the pistons is leaking bad and theyre not made any longer since like 20 years back... this would really sort that thing out!
Hey so I’m running this setup but what I’m worried about is overfilling the bags, how do you avoid doing that? I just don’t want them to pop. I’m not running a pressure gauge
Trying to figure out if you need aftermarket coilovers for the front bags or if you can use the stock struts. I'm betting there's some modification of the stock struts, if you can use them.
If you're using coilovers, that's more to the cost of this, too. Not a bad video, but that part is kind of unclear.
Genius. And keen to help others. Top guy
Bro, compressor will automatically disconnect after inflating the bags? How you know if bags are fully inflated?
Sorry im very new to this
What’s up bro. I know this defeats the purpose of the video but can you always upgrade to 3p management ?
Yeah you can always upgrade air management in the future and use the Same bags
Yes that so good I have hope a again
How much to get a shop to install this? Mainly because i dont have a grinder to smooth out any bolts. Also are there any tools needed to install them apart from screwdrivers, ranch and the grinder?
VivifyProductions labor depends on the shop, I’ve always done my own work so idk how much it would be, as far as tools you would need basic hand tools as well as a welder if your fabricating bracket instead of buying already made brackets
@@CARSHOPBLOOM i see, im ok with welding as well, its good to know hand tools will get the job done thxxx
How was your tire wear with this manual air setup? Just guessing at a correct ride height, means alignment changes alot.
what I did with my set up, where I now I will be driving my car with the manual set up, I align the car on that set up. generally you will not be driving the car at it's lowest... you only low ride for cursing or for shot periods at ah time!
Well done. Good for you. And thanks for helping us all out.
Would u happen to have links to these items?
yes links thank you been trying to find the right fittings that you used
Bags alone will be $800... if you run bag over coilover all way around
What bro good video What’s the link for the pieces you have behind the pedal valve switch?
Does it matter what size gallon tank you use? I dont have much space in the party car and that 5 gal is HUGE for me lol. What does the size difference change exactly? Thank u btw for this video
Draydel tanks size doesn’t really matter. The more air you store the less the compressor has to run, if you air and down a lot you’d want a bigger tank but if you don’t play with it too much you should be fine with a smaller tank
NOJIRI GARAGE my man! I figured, but thank you for clarifying! I’m currently rebuilding my pop up party car- @leboomin. It’s gunna be even crazier because of you bro thank you
I guess if you wanted Peace of mind, you could get uas bags, the compressor and an accuair controller? Would definitely run coilovers. Though. I guess the pros of air sleeve struts would be more clearence? But those prices are the cons I guess.
John Cangieter Its really about what you can afford, Uas and coil overs are cheaper than air struts but are bulkier also need to dial them in as far as dampening and psi goes if you want a good ride quality, each car is different so it’ll take a little fiddling, for management if you can afford airlift then I say do it, the presets and rise on start are cool functions to have
Do your paddle switches ever leak? Mine are leaking and it’s not the air lines
Never had an issue with my paddle valves
Super inspirational! Was gonna order a kit from ebays chasis tech. But looking at this Im gonna piece together my own kit. Any tips for a 2004 Ford Expedition?
this was so helpful tysm, i can just run this on my stock struts correct?
please guide me i want install this air bags in my honda civic 1990 model
Would anyone recommend getting the same bags but on 1500 Chevy
Slam bags
That's all great info and all but the real money saver seems to be getting your girl to do the work! At most my wife will bring me out some nice cold water and in this Texas heat it's a lifesaver! Nice video. How is the ride compared to stock?
Jordan Pierce-Hunter haha. Thanks man! It’s pretty much just the same as stock. Way more comfortable than coil overs.
I’ve got a 2010 Cadillac CTS Wagon I want to bag but I have no clue where to begin! Any advise besides the vid?
Joshua Belaski eBay sells a complete kit which includes 5gallon tank, 440cc compressor, with relay with wiring and pressure switch for $129. You can buy bc coil replacement for $315 per a corner and bags that thread on specially to any bc coils for $250 a bag. It seems like a lot but if you’re on a budget it helps because you don’t have to buy it all at once.
Just ran across this again but much Mahalos for the info and I will definitely go the route you suggested.... Mahalos again
i'm glad i watched this, thank u
Bentley Bob no problem!
@@CARSHOPBLOOM can u send me link to get the lines and fittings? I live in jamaica and pretty much no1 here is running them so i plan to do it on a civic coupe i plan on buying
Hey man great vid, just want to ask you...i have a vw polo vivo 9n3 and has the same suspension setup as your XB, so i wana know will the brackets be a bit different as i have the ordered the air house rear bags as well same as you..any advice would be welcome.
Do you know if I can use my stock rear shocks and my front aftermarket coilovers because the shocks that came with my coilovers went out.
If the entire axle is on the same valve, the car can lean.
?What
@@bradsailer7739 hes trying to say if the front bags are on the same valve the car could possibly lean since the air can shift from one bag to another, esp when turning. This can be solved by having a check valve that would not allow that to happen. Its recommend to run all 4 sides independently
Common misconception, but you can't run a check valve in-line to a bag. It would store the air in the bag, but prevents the return path...+ buying 2 check valves with fittings, etc. is going to run the cost of a second valve for a 2 corner system.
It's issues like this that deceive people into thinking they can DIY most of their own air systems.
@@josephspellman2698 If you put 4 checkvalves, you would have to use 2 paddle valves for the front and 2 for the rear. One valve for inflating and one for deflating. But you deffo need checlvalves, or at least big ass anti roll bars.
Hey man glad I ran into this video bcuz I’m looking for cheap air suspension. But I don’t know what I actually need. I have a 2017 civic si. Maybe you can help me piece together what I need
Just ordered my setup and realized the paddle valves i ordered have the 1/4 barbed fitting instead of the disconnect style in video..will they still work or should i not use em?
uptonfg that style is fine, I’ve used them before
Possible to put the bags over the factory struts in the front or does it need to be coilovers?
JakeWardell 19 with some modifications it’s possible
Mr. Blaine, how are you sir? Great video and VERY informative. I have a question sir, I have a 2015 Honda cr-v 2wd with over sized wheels and tires and they rub a little bit in the rear when I have passengers on the back seats. I would like to know what route I should take to lift the rear of my car? Would I just need air bags and would they fit the stock rear struts or do I need aftermarket struts with air bags already installed in them or would it be cheaper to buy aftermarket struts and then buy airbags for those new struts? I don't need the gauges or a tank or anything like that just a Schrader valve in the back so that way I could just air them up at a gas station wherever I know I'm gonna haul people around. Again thank you for the video and keep up the good work sir, take care my friend. Thumbs 👍up on your video.
William Santiago in your situation I would just get helper bags, you still run your regular suspension but you can fill the bag up when you have a load. They use them in truck that tow to lift the rear from sagging
@@CARSHOPBLOOM Thank you sir for the fast reply and the info. I will look into those helper bags. Keep up the hard work with your videos.
Do you know where I could find some rear airbag brackets for 2013 Audi S4. All the kits are $400-500 with the bags & brackets. I just need the brackets???Thank You
NICE JOB GOOD INFO THANKS
Thanks for video for the inexperienced like myself
I'm in California too bro, Bay Area. I wanna do this to my mustang after I buy some nice wheels
Very informative, thanks homie
Hey bro, nice job! do you think i can go ahead with the same project for my audi a4 b8 ? do you recommend ? if you can told me what i need to buy its should be very appreciate because all your amazon link was dead. thanks and enjoy the life !
I'm doing a Buick 225 restoration! Do you think they'll fit on a big boat car?
I’ve got a Mitsubishi diamanté 1993. It comes with factory air. Can I fit after market bags to make it lower?
I have a set of Tein coilovers. Can I get bag to go over he coilovers to replace the springs?
What do you recommend?
Thanks.
Hello bro, Great job over there! Im wanna bag my car too, because its impossible to find coilovers under 1300USD without delivery...
So where i can buy this switch? Can you link it?
Have you ever heard of Raceland?
Hey dude I have same set up as you but it’s with D2 Coilover airtekk bag conversion (18 Accord). My bags will inflate but will not deflate. they will only deflate when when I remove the 2 airlines from the paddles switch. I have only 2 paddles one for the front and one for the rear.
Adrian Garcia sounds like your airlines are reversed on the paddle valves, try switching them
Blaine Nojiri you’re right, thanks!
Adrian Garcia no worries🤙🏽
Probably a stupid question but I'm gonna be running air lift bags and this kind of manual set up with it. I see how the air gets from the tank to the bags but when u air out where does the air go if the lines only fill the bag? Does it feed all the way back into the tank?
T0MMY561 the air releases out the back of the paddle valve
awesome video! I am finally piecing together this kit. can you specify the part number for the front and rear bags? The link only has the fronts im assuming? please and thank you!
Darryl Sooknanan the rear are called “air house” from universal air. This works for 350z if you have any other car please check to see if fitment works for your car before buying
@@CARSHOPBLOOM awesome, thank you for such a fast reply! yes i have a 350z which this set up will be going into. if all goes well, i would like to do the same mod on my 18 camry. it looks very cost effective.
If you made a list with links you would be such a g
Great vid... When you lower the vehicle via paddle switch/valve, where is the exhaust?
Yea I'm wondering the same!
At the switch, I would guess
Whats your instagram men.. i have a few questions about this video
.. by any chance do you have for sell your old set up
See? This is what happens when you do your research👏👏
900 for a 32 way dampening coilovers is a better investment than maintaing bags and lines
Junky Garage True, this is just an alternative for those looking to go air and not looking to paying thousands on a big branded air suspension kit
The bags would offer a smoother ride quality tho. Paid $1000 for BC racing coilovers but the ride quality is shitty. If I run over a dime I feel it. Great stance tho, if that’s all you care about.
Ok I want to bag my mk4 Jetta in the back only, because I'm making it a Ute and I just want it to sit level.
Would the manual setup be the way to go?
The bag kit is around 600$ , but these controllers appear to cost almost double that !
I can't see paying that kinda money for it to automatically sit where I want at the touch of a button.
I'm a noob , what else should I study up on in the air world ?
Killer video bro !😎 Appreciate it!!
Lucas Hannah no worrie man!
How's the ride quality? What's the total cost?
What about wen airing out where would that go ?
Thanks bro I'm tryin to install a kit on my maxima
Noel Brown no problem
Appreciate the informative video brother 🤙🏼
Erniel Flores no problem 🤙🏽
Thanks enjoy watching this video
Great for cars that don't really have aftermarket suspension setups available. Wondering if you could run bags on stock struts if you don't have coils?
LTMC Media yeah, I’ve seen people do it but you need to modify the strut to mount the bag
Blaine Nojiri dope thanks! Considering buying a 79 Mercedes 300TD Wagon to bag but i doubt anyone makes coilovers for them
LTMC Media you can convert struts to coilovers using kits then put the bags on instead of springs, will save a fortune doing it like that instead of a one off named brand kit
Save trunk space, but missing spare.
Not sure if that's a good trade off, but gotta pay to play i guess.
Mr Ch33seHed I no longer daily this car and my other car needed a spare, mostly drive this car to drift events where I have Drift spares.
Yooooo man do you have a install vid for the manual air Management? Can't find a good one. Also how you can the air hoses. I have the convertible Z and I think it's gonna be a lil more difficult
Matt Williams I have vids on mounting the bags to my coilovers on my channel but this video shows how to put everything to tether minus wiring a pressure switch which if you google is really simply. As far as routing the air line I ran it under the car following the brake lines
Good stuff bro
Hey bro.. love all these haters.. talking about handling and shit.. you shouldnt be hitting corners and drifting if ur doing air anyways.. but thats what good shocks are for.. bound and rebound.. i could see this working perfectly on some aggressive shocks like koni’s etc.. i had a quick question though about these paddle valves.. when you dump/ air down air is just coming out of the actual valve it self im assuming? Could you run an exhaust line so you dont hear the dump inside the cab? Thanks in advance bro..
Great Video bro!
So from the tank you don’t have to run a bunch of individual hoses out you just need one ? And split it or just for the video you have one in to show ?
jbam0224 correct 1 line then split at the switches
subbing and liking man ur a genius thanks for the teaching
lovelifedayz thanks man, just sharing the knowledge
Hi guys, need help, do you know where can I find the front and rear bags for a Toyota Hiace 2017, any help will be appreciated thanks
So for the rear you put the bag on the spring bucket? And for the front you take the shock off the front coil? I’m on stock sport suspension on a g35
Legit infliction correct, I’m on coilovers tho stock shocks will need to be modified for bags to fit
Great video!
THANK YOU FOR THIS VIDEO!!!!
Doge Cate no problem🤙🏽
how Low do the front and back bags drop when installed?
Hey man.. can you put the bag on the stock suspension?
If the coilovers you put them on are cheap with horrible ride quality will that poor quality show in the bags
Jabbaweezy I’m on eBay coilovers and they ride perfectly fine. If the coilover is blown the ride will definitely not be enjoyable
How do you which bags are specific with your car ? Ive got a camaro with bc coils but getting confused which bags should i buy , i mean the bag size ?
neelmanthan vishen hit up c2bsuspension they have bags for your car
I am going to rebuild Honda civic 1986 model, please guide me which air bag is fit for that car
chaudhry shahid siddique in fitment industries u get anything even the fitment specs and everything else u need
thank you man you are smart