I got 2016 impala, I hooked up a kicker amp and some 6×9 in the rear dash I hooked inputs from the greens for left and I think blues , like it says to do I got nothing,,, do I have to have an active crossover?
@@isiahgreen8405 I looked up load generator, I still don't know what u mean, ur referring to the low level output of the radio into the amp wires? Seems like maybe it is a low signal and needs boosted, is that what u mean?
Man them Sylvester 6.5's absolutely SCREEEAM I run them myself and they're no joke at all lol-ol-ol I got 4 of them and 4 DB neo tweets on a Wolfram AW-125.4 then two Wolfram PT-18'S each with own Wolfram AW-9000.1D at 1ohm! JS 270a and Mechman 320a alts with XS SB1000-31 supercaps up front one each side then I have the Limitless cyber 12k in back for the bass amps and a reg Limitless 25ah for the 4ch voltage barely ever even moves even full tilt at idle I love it...
Yep. It's a good battery and easy to install. Noticed a difference when I installed it. My music was more detailed and powerful. I'm running their Lithium batteries next
@@isiahgreen8405 awww sorry to hear that bro. I got 2 gen-1 Atomic E.L.E 12s, dual 4s in a 5.25 cubed box b n pushed by a skar 1500 for now. Gonna upgrade to a US Acoustics Nick(2.5krms) an new ALT(250amp) soon. Maybe I'll get the US Acoustics Big Ben(3.5krms) after I get tired of the Nick.
Get a Mechman. The JS broke in less than a week. I used a 240a mechman and my voltage would only drop to 14.2 clipping. Not clipping it stayed 14.5 to 14.7.
Bro I really need to figure this out, I don't wanna do too much or have all my space gone. So basically I just wanna do 4 door speakers 4 tweeters. And keep my 2 12s but I don't want vocals and instruments over power bass and vice versa
Just find your balance man. It's up to you how you want to sound. Some days i fell like just hearing mids and highs , some days I like heavy bass. Just have fun with it. Car Audio is a toy.
@@isiahgreen8405 hate to bother you but I have one more question. Why y splitters did you use? Was they 2 female to 1 male or 2 male to 1 female? I want to do this with an all deaf bonce amps. 1 aab 400.4 1 aab 600.2 1 avatar amp for super tweeters and aak 8000. 1 or surge 7000.1 on a pair Xv3 15s with Arnold mids and T25 super tweeters
While that box may "jam" like you say you're definitely not getting the full potential out of your subs as you would with a custom made box built to spec for them specific woofers... Just food for thought if you ever consider an upgrade in the future, also I had two of them HDS3.2-15's myself and I pushed 3k to each of them with no problems at all long as it is 100% clean power setup with an O-scope and you have to have a sharp ear to detect any clipping but yeah they'll certainly take more power brother although I wouldn't try that till you get them in a proper enclosure...
Have you had any issues at all i have a 18 inch Rockford Fosgate with a epi center and a 1500 Rockford Fosgate power amp and i blew my distribution battery fuse block and alternator over amps to 15 amps them blows any advice what i should do
bro just casually just has my dream build. same exact car just mines black lmao
for your signal to the lc7i, did you go from the head unit or get the signal from the speakers?
Soundqubed for the win!!!!! My wife has a 15 and 1200 watt amp I’m trying to “borrow” lol…. Would you ever do door pods for the front?
Soundqubed be jammin. I did door pods on my Jeep and they were easy to install. Check out customspeakerpods.com
How did you mount the battery in the trunk and keep it from moving around??
Wood rack. It's just covered with carpet.
@@isiahgreen8405 you made it?
@@TheDaman1111 nope. All Out Audio in Killeen. Paid $150 for the custome amp rack.
I got 2016 impala, I hooked up a kicker amp and some 6×9 in the rear dash I hooked inputs from the greens for left and I think blues , like it says to do I got nothing,,, do I have to have an active crossover?
Look up load generators. That factory amplifier needs to see an ohm load.
@@isiahgreen8405 I looked up load generator, I still don't know what u mean, ur referring to the low level output of the radio into the amp wires? Seems like maybe it is a low signal and needs boosted, is that what u mean?
@@isiahgreen8405 ok, I did more research, I understand, thanks a lot I'ma look into getting one, u think crutchfield for 39$ for a pair is good?
So far to go son, so damn far. When too much is too much, it's not a great thing
Where u find them kick panel for your tweeters in the front
customspeakerpods.com/store/vehicle-select/universal/3-1-2-for-universal-basic-angled-speaker-pods/
Man them Sylvester 6.5's absolutely SCREEEAM I run them myself and they're no joke at all lol-ol-ol I got 4 of them and 4 DB neo tweets on a Wolfram AW-125.4 then two Wolfram PT-18'S each with own Wolfram AW-9000.1D at 1ohm! JS 270a and Mechman 320a alts with XS SB1000-31 supercaps up front one each side then I have the Limitless cyber 12k in back for the bass amps and a reg Limitless 25ah for the 4ch voltage barely ever even moves even full tilt at idle I love it...
Hot damn. You got a grown man system. That's coo man.
Bro them was that xs battery under your hood a easy install an is a xs 3400 a good battery too go under the hood
Yep. It's a good battery and easy to install. Noticed a difference when I installed it. My music was more detailed and powerful. I'm running their Lithium batteries next
@@isiahgreen8405 bet I appreciate that
How did you get muds from front doors??? Mines only plays lows.
Use the AudioControl LC7I to get a full range signal and put a amplifier on the mids and use the crossover on the amplifiers.
Nice trunk build brobro...ima trunker 2. Trunkers R Us
Thanks Man. This car got Totaled. Going to play with the SUV next. What are you running?
@@isiahgreen8405 awww sorry to hear that bro. I got 2 gen-1 Atomic E.L.E 12s, dual 4s in a 5.25 cubed box b n pushed by a skar 1500 for now. Gonna upgrade to a US Acoustics Nick(2.5krms) an new ALT(250amp) soon. Maybe I'll get the US Acoustics Big Ben(3.5krms) after I get tired of the Nick.
@@MistahALJ77 That's going to hit hard.
I am a similar set up in a 2018 impala. How is your voltage with a the JS 320 and 3100 in the trunk?
Get a Mechman. The JS broke in less than a week. I used a 240a mechman and my voltage would only drop to 14.2 clipping. Not clipping it stayed 14.5 to 14.7.
Where did you get the 3.5 tweeter pod from
customspeakerpods.com/store/vehicle-select/universal/3-1-2-for-universal-basic-angled-speaker-pods/
Did u tap in to the amp in the back cuz I’m trying to install subs and idk what wires are correct
If you still need this info I can send you a photo of how I have mine wired
Off the green plug that goes into the factory amp, green, green black,,, and I think blue n blue black
@@nathanmiller4754 I could use that
Whats the max clean volume??
75-80% sounded the best
Bro I really need to figure this out, I don't wanna do too much or have all my space gone. So basically I just wanna do 4 door speakers 4 tweeters. And keep my 2 12s but I don't want vocals and instruments over power bass and vice versa
Just find your balance man. It's up to you how you want to sound. Some days i fell like just hearing mids and highs , some days I like heavy bass. Just have fun with it. Car Audio is a toy.
Can't hear any bass
That song is playing at 28hz. Just can feel it. Definitely can hear my car car blocks away when I'm playing 39hz to 50hz.
Did u do a big 3 upgrade?
Yes sir. More like the big 4 with a Mechman 240
Hey bro what did you use to run aftermarket amps and keep your factory radio? I’m also looking to run those deaf bounce neos
Audiocontrol LC7i and a RCA Distribution. I got that LC7I for sale if you want it.
@@isiahgreen8405 hate to bother you but I have one more question. Why y splitters did you use? Was they 2 female to 1 male or 2 male to 1 female? I want to do this with an all deaf bonce amps. 1 aab 400.4 1 aab 600.2 1 avatar amp for super tweeters and aak 8000. 1 or surge 7000.1 on a pair Xv3 15s with Arnold mids and T25 super tweeters
I got same car did you tap into the amp in trunk or else where to keep factory
@@edmondcarter9457 no y splitters. Use an RCA distribution block.
@@willh7737 the amp in the trunk
While that box may "jam" like you say you're definitely not getting the full potential out of your subs as you would with a custom made box built to spec for them specific woofers... Just food for thought if you ever consider an upgrade in the future, also I had two of them HDS3.2-15's myself and I pushed 3k to each of them with no problems at all long as it is 100% clean power setup with an O-scope and you have to have a sharp ear to detect any clipping but yeah they'll certainly take more power brother although I wouldn't try that till you get them in a proper enclosure...
Right on Man. Yep. Ended up running one in 4.5 cubes tuned to 32hz and the lows were incredible.
Have you had any issues at all i have a 18 inch Rockford Fosgate with a epi center and a 1500 Rockford Fosgate power amp and i blew my distribution battery fuse block and alternator over amps to 15 amps them blows any advice what i should do
How many amps is your alternator rated and what brand is it?
@@isiahgreen8405 170 amps I'm running a 1500 power Rockford Fosgate
@@gregorioguitron9613 you need a bigger alternator. That amplifier can pull 300 amps. Upgrade your electrical.
ruclips.net/video/mRtH4kyy1ww/видео.html
He's running the same amplifier you have
@@isiahgreen8405 i did upgrade the wiring i think it might be the alternator