Installation | LEDGlow Million Color Golf Cart Underglow Kit Add-On Wheel Well and Interior Lights

Learn how to install Add-On Wheel Well and Interior Lighting to LEDGlow’s Million Color Expandable LED 4 Seater Golf Cart Underglow Lights.
Get these amazing Golf Cart LED Light Kits here: www.ledunderbody.com/multi-co...
EXPANDABLE 4 SEATER GOLF CART LIGHTS
This video shows you how to install an LEDGlow 4pc Million Color Golf Cart Interior Lights Add-On Kit and 4pc Million Color Golf Cart Wheel Lights Add-On Kit to our Million Color Expandable 4 Seater LED Golf Cart Underbody Kit. Combine colors and lighting effects to create the ultimate lighting showcase for your EZGO, Club Car, Yamaha and other models.
GOLF CART UNDERGLOW CONTROL BOX
Choose between 10 Solid Color Modes and lighting effects including Flashing Modes, Strobe Modes, Fade Modes, Sound Activation Modes and more. The Million Color Cycle Mode scrolls through an almost unlimited number of variations in the shading of each Solid Color Mode. By combining colors and effects you’ll be able to create lighting patterns that make your golf cart stand apart from the rest. All golf cart lights features are available through the programmed Control Box and can be operated through the Control Box or the included Wireless Remotes.
GOLF CART LED LIGHT KIT INSTALLATION
Look no further than LEDGlow when you’re looking for the best golf cart LED lights. Below you’ll find the steps we recommend for installation. However, if you handle your install differently or have any installation tips, please let us know by posting in the comments below. You can also contact us via email, social media or through our website:
1. To install the interior add-on tubes, start by pulling back the rubber floor mat to allow room to run the wires. Use an alcohol pad to clean the installation area and the back of the light tube.
2. Place an included double-sided adhesive strip onto the back of the tube and attach the tube to the dash panel of the golf cart.
3. Run the wire to an open hole in the flooring keeping clear of moving parts.
4. Repeat this process for the second interior tube.
5. Moving to the back of the golf cart, use an alcohol pad to clean the installation area and attach the tube using a double-sided adhesive strip.
6. Repeat this for the 4th and final interior tube.
7. Once all four interior tubes have been installed, run all wires to the junction box keeping clear of any moving parts.
8. Remove the smaller rubber plugs from the junction box and place each connector into the ports. The order in which the tubes are connected does not matter.
9. To install the wheel well add-on tubes, clean the installation area and tube with an alcohol pad. Place a double-sided adhesive strip onto the back side of the tube and attach it to the area you just cleaned. Use the included screws to fully secure the ends of each tube.
10. Repeat this process for the 3 remaining wheel well light tubes. For the front tubes, we will be attaching them to the front side of the golf cart frame. Mounting locations may vary based on what make and model golf cart you have.
11. Once all 4 wheel well tubes have been installed, run all wires to the junction box keeping clear of any moving parts.
12. Remove the remaining rubber plugs and insert each connector into the ports starting with the front tubes first.
13. Verify that all wiring is secure and away from moving parts.
14. Finally, power the kit and test for full functionality.
View our entire product lineup at www.ledglow.com/
Connect with us on social:
/ ledglow
/ ledglow
/ ledglow
#LEDGlow

[@kylemc8851]

Be nice if you should how to hook up the junction box, but good vid!

[@ledglow]

We do have both a gas and electric installation videos that show you how to install the full kit with the junction box.
ruclips.net/video/9sCOjEn3Hz4/видео.html
ruclips.net/video/Yta7_D0S6Uc/видео.html

[@mondonada]

kinda useless video without the junction box attachment.