@@kristysampath ruclips.net/video/67itluk_2Vc/видео.htmlsi=aNLWSMbD-Ijjt_jj This link is for a circular dress tutorial, however, the hemline was turned with a crinoline and a lining. You can finish the hemline with bias tape Or turn the hemline with just 1/4" to 3/8" at most, this will reduce the wobbling at the hemline, then iron out properly.
Thank you for this tutorial. I am in the process of making raglan sleeves for a jacket project and found your video. Firstly, I matched the shoulder slopes of front and back bodices (which meant raising the low shoulder point on the front bodice by a small amount). I started with the back bodice and completed it as instructed. Then I began working on the front. After drawing in my lines and angles and adding the length to the sleeve, I found that the front raglan sleeve seam was over an inch longer than the back raglan sleeve seam. So I erased all my lines and ended up drawing the same line as I did on the back piece . This meant erasing the deeper front armhole curve and replacing it with the same curve shape as the back armhole so that the raglan line could touch the armhole curve. Now the amounts for drawing the mirrored angles are now the same and thus my underarm seams on each side of the sleeves now match. I don't know if this is the correct way to go about it, but thought I would share it in case others came up against the same problem. Please correct me if I am giving out the wrong information.
It's best to match the front and back bodice along the shoulder seams before cutting to ensure they are equal. Sometimes they might not be equal, this is as a result of different body measurements
Best explanation on raglan sleeve cutting have seen so far..well done ❤
Oh dear
I'm glad it was helpful
Thank you for watching 💗
Excellent tutorial. I watched another that didn't show how to cut out the pattern. Thank you. I understand this fully now.
You are welcome
Glad it was helpful!
Is there any tutorial you would like for me to do?
@Jayflair. I'm just a beginner. Whatever you've posted, I'll be attempting
@@kristysampath thank you for watching
I'm sure you will learn so much from my channel
Is there any tutorial you would want me to do?
@Jayflair. Do you have circle skirts tutorial? Especially on hemming them, mine keep coming out uneven 😢
@@kristysampath ruclips.net/video/67itluk_2Vc/видео.htmlsi=aNLWSMbD-Ijjt_jj
This link is for a circular dress tutorial, however, the hemline was turned with a crinoline and a lining.
You can finish the hemline with bias tape
Or turn the hemline with just 1/4" to 3/8" at most, this will reduce the wobbling at the hemline, then iron out properly.
Thank you so much, I like this pattern.😊
You're welcome 😊
Simple and straight to the point. Thank you
Thank you for watching dear 💕
Thanks for the tutorial 🥰
You are welcome dear
I got everything you explained....aw about fixing d sleeve back to d bodies....since it doesn't av shoulder 😊
@@estheradeola4664 fixing the sleeve is not difficult, I'll do a tutorial on that soon. Thank you for watching
Very lovely, pls do corset for us your teaching is very understanding
Thanks dear
I'll do corsets pretty soon
Watch out ❤️
Thank you for the tutorial
@@temitopetaiwo8142 you are welcome
Thank you for this tutorial. I am in the process of making raglan sleeves for a jacket project and found your video. Firstly, I matched the shoulder slopes of front and back bodices (which meant raising the low shoulder point on the front bodice by a small amount). I started with the back bodice and completed it as instructed. Then I began working on the front. After drawing in my lines and angles and adding the length to the sleeve, I found that the front raglan sleeve seam was over an inch longer than the back raglan sleeve seam. So I erased all my lines and ended up drawing the same line as I did on the back piece . This meant erasing the deeper front armhole curve and replacing it with the same curve shape as the back armhole so that the raglan line could touch the armhole curve. Now the amounts for drawing the mirrored angles are now the same and thus my underarm seams on each side of the sleeves now match. I don't know if this is the correct way to go about it, but thought I would share it in case others came up against the same problem. Please correct me if I am giving out the wrong information.
You are welcome
It's best to match the front and back bodice along the shoulder seams before cutting to ensure they are equal. Sometimes they might not be equal, this is as a result of different body measurements
🙏