Building an Unlimited Range Electric Boat
HTML-код
- Опубликовано: 13 авг 2023
- Check out PVcase here: pvcase.com/RCTestFlight
Create a free Onshape account: onshape.pro/rctestflight
Solar Panel Pivot Mount Onshape model: cad.onshape.com/documents/74e...
Thanks to PCBWay for sponsoring the CNC aluminum parts! Get your custom parts here: www.pcbway.com/?from=rctestfl...
Coupon code: PCBWay-rctestflight
175 Watt 12 Volt Flexible Solar Panels - renogy.com/175-watt-12-volt-f...
Rover 60 Amp MPPT Solar Charge Controller - renogy.com/rover-60-amp-mppt-...
#renogy
FIFISH V6 EXPERT Submarine: bit.ly/3RgTnYB
Amazon Store: amzn.to/3Dc5EsW
Follow rctestflight on IG: / rctestflight_
Support rctestflight: / danielriley
Join my discord server to talk about building stuff: / discord 
Наука
Circumnavigation of the earth when?
a video about that comes when he is 100 years old
Fully autonomous
About 67, 000 miles to circumnavigate the south pole. 😎
Already been done by solar plane
Asking the true questions!
You might want to do an IR camera crack check on those panels now. They're *able* to flex but not intended to flex while in operation and the cells themselves will still get damaged. A lightweight yet rigid mounting substrate would be advised, or at minimum a support grid underneath.
The easy "lightweight but rigid mounting substrate" is probably... a bunch of inches of foamboard faced with Poor Man's Fiberglass?
The flexible ones at our local camping store come rolled up in a box. Is it best to never roll them up again once unfolded? What's the IR camera test? is that when you put voltage back into the panels and film it with your phone to see what lights up and what doesnt?
Micro fractures from the flexing is going to kill the panels very quickly. As suggested, use a thermal camera and take progressive photos to track their decline. You will definitely already have fractures.
@@nickorbeck8693even without flex, the flexible panel will lose a lot of peak output because of the degradation in the top protective layer
There are already many videos explaining about that.
@@nickorbeck8693 Or even better, just buy nonflexible panels instead, at least in this case
Winch was probably pulling the spud up out of the water, the huge metal spike that goes into the river bed to hold the barge in place while the crane works.
Catamaran or Trimaran would definitely be the ideal hull configuration and give you maximum style points too.
i wonder how broad you can make a catamaran / and how long before you destroy it in the high seas, if you your goal is to collect as much sun as possible.
@@exposett246 Largest motor trimaran is 84m long, largest sailing/racing trimaran is 40m long and 23m wide. So, pretty dang big...
He needs them.
His klutz of a vessel and addiction to having complicated crap made for him makes this a great example of how not to do things and 100x as expensive and 10 times less efficient or seaworthy as it could be.
If he wasn't in a sheltered millpond he would be dead already.
Adding on about a catamaran. More stability and the solar panels can be a roof for a nice cruising vessel, therefore not in the way or making glare back onto the passengers.
@@exposett246 The real hull of a catamaran and trimaran are shockingly small and narrow (as opposed to wide deckboard). You want them to be long, though, for stability.
you can also flip the motors around and have them in a pull configuration. they also do this on large ships with azipods so the prop can take in clean water.
For your solar panels, I feel like you're either going to drop a main pin or a cotter pin into the water eventually.
I think a "ratchet" system might have been better for controlling the position of the panels. Using pins looks tedious and it's an accident just waiting to happen.
or an linear actuator could have enough power to lift and lower it to specific degrees and wont drop the panels even if the motors fail.
Could attach the pin via cable to the boat. But that is just ignoring the main issue.
Just need some of those old fold up beach chairs.
Get one of those retaining pins and some string & tie it on the mechanism
I think he needs hydraulics.
Nice video! Some bio-corrections (based on taking marine science like 40 years ago): The "sea slug" was actually a sea cucumber. And the anenome-like things are tube worms.
you realize that these are done tongue in cheek... gooses also do not travel in herds.
I absolutely love the dialogue and description narration of what you were seeing and where it was with details. Feels like you were hanging out with you both, makes for great content to listen and watch.
I love how curious Daniel is about everything going on around him. What all the ships are probably doing, how much they cost, how they got there, who owns them, how they operate etc. he reminds me a lot of myself that’s why I enjoy watching his videos. Also a great teacher. Explains difficult things in a simple way. Don’t ever stop making these videos !!!
yes the technical things are nice, but it is also nice to see what is going on in that harbour.
Definitely, a roof build would be awesome. Utilizing the sun at the same time being protected from the sun. 👍
But for balance he might install some plastic bottles at the sides.
This project has come a long way and you've overcome a lot of challenges! Congrats on what seems like a successful trip despite the weather!
man i like it how you take us all out with you for a ride on the boat, explaining and showing us around like a dad lol
surprised how practical this is, making the Tech Ingredients catamaran combined with solid sunpower rigid panels for a roof would make a hell of a boat!
You're really good at keeping our attention.
Very entertaining.
Your boat videos are honestly my favorite of your catalog. All great stuff but these really do it for me. The unlimited range solar electric boat sounds like a dream
I love all of the cinematic shots with the drone and bridge I would really want to see more of that
Version 2 will have a solar roof, with solar outrigger/wings that fold up for easy access, and fold down to protect the cabin area from rain.
Exactly what I imagine 🤙
@@itsfonk
I'm about to make one.
@blueblubber6607 how's it going?
@@Doki_LP
Bought the two floaters of a catamaran and a two seater kayak such that I can assemble it either as a trimaran or as a kayak with a "solar trailer" (3kW solar power)
Just refurbished the floaters, starting to build the aluminium structure for enlarging the catamaran and getting the solar roof in place.
Sooner or later I will put it on my website.
@@blueblubber6607 👍
For this setup and maybe in the feature V2 version, there are two-sided solar panels, so with the water reflection or the roof reflection you could give a good amount of energy with even 1 panel ( Same size of one set that u have in the side). Additionally for the roof would be interesting to have a system that elevates the left or right side depending on the sun's attack angle
These types of videos you make are addicting, anything on the water especially practical ones like this (not small rc stuff) are amazing. I can’t get enough of this type of content.
I love that you show us everything, including your failures and iterations to solve those problems.
A lot of other youtubers that do content like yours barely seem to explain or show any actual processes. imo, this makes your videos way more useful and entertaining than most with similar content.
Might help you to add buoyancy to the "wings" like outriggers, or a tri-hull catamaran.
Love these videos, they always inspire me. Thanks for sharing! 👍
Thanks for this. I’m trying to get to Seattle because it feels more like home than here. Seeing all the port activities renewed my interest to getting there and I was greatly encouraged.
Came for the solar energy stayed for the awesome excursion around the dock! Keep up the great work.
I recently saw a huge cruise ship with propellers that pull instead of push and they said it's done for efficiency, makes sense to me. Might be something to try.
Excellent POC. You showed a catamaran as a better choice which I would NOT deny. A better choice again would be an outrigger trimaran with long and thin hulls for very low hydraulic drag. The outrigger struts could be furnished with very many panels, and potentially made to be fully or partially walked on.
Good luck, I look forward to whatever you do.
I think the side mounted system is great! Better for trailering, basically twice the area compared to just a roof and it makes use of otherwise unused space. Very inspiring video.👍🏼
Good you took the boat through fresh water to give it a clean. Great video.
The roof is sooooooo much better of an idea. Shade on the open lake is pretty important, especially for something that goes slow and will be cruising for hours. They also get in the way and are easy to damage when docking. They are also a paint to adjust. Also some panels loose all power if even a small area is shaded. It would be cool to do a solar house boat.
My dad had an old Boston Whaler built in the 70s. It had a nice outboard motor and a driver spot in the middle on the right side. Having the flat bottom made it easy to beech.
I cant believe it's already been a year since you built that boat. That was the first video of yours that I watched, and I remember thinking how crazy you were. My opinion hasn't changed but you have made that little boat into something awesome! :P
I feel like the Tech Ingredients crew owes us an update on their boat project now!
Giant pink foam plane at Park City school convinced me.
Love these trips you take with the solar boat. Even tho I've lived in Seattle my whole life. Your trip around lake Washington or this trip up the duwamish seem like such fun adventures. Thanks for filming it all!
I know that little park with a "boat launch" off airport way too. The video doesn't do how steep it really is justice 😂. Glad u made it out safely
I foresee a day when a sail could be made of PV viable materials.
The best of both worlds.
With how much it gets pushed around in the wind it really feels like it might be worth figuring out a way of getting propulsion from the huge panel area you have. Not that it's a great hull design for it; but perhaps a self-aligning wingsail like Saildrone?
I love seeing where these adventures go; I wasn't sure what was going to happen when you did the boat restoration video all those months ago, but I'm always pleased to see when a new chapter comes out.
Awesome! There is nothing better than that freedom. Concerns with survivability in bad weather, and with the UV damage against longevity. But I think you proved that riverine work may be quite functional. Double sided panels will allow you to upright both panels for whatever, while still giving good gain from reflection.
i love the ish out of your videos, my dude. every single one is a treat. please continue!
i think you should try like floaters next to the boat to support the panels and they could also add a bit more wave protection and displacement to avoid expensive tipping
I would think any large sudden jump and smack on the waves would push the panels far higher than it does now... likely break it much faster.
I'd like to imagine the blackberry guy looking out on the water from his yacht, seeing your boat towing along 6 kayakers, and saying to himself,
"Yes. This is the technology I envisioned for the future."
I love these videos. It's fun watching you learn, explore, work, and have fun.
We needed someone like you to actually go and do this kind of thing
You should totally go bigger and make a solar powered boat you could potentially live on for a while.
i think a mast would be a perfect way to be able to deploy the panels, and help support their weight. then you would struggle less, and can have a stronger support structure for the panels. and i might add, you should have some pontoons you can deploy on the ends of those wings. and also, it may be a good idea to have a permanent mount for the brackets. that way you wont loose your panels and benches in the worst case scenario of a flip over in bad sudden surf. i might also add, you could create a battery bank structure, such that they where both balanced, and fully secured. perhaps have them on the side walls to act as extra side benches, with a cover to lift up to access, and would seal the battery compartments from any water, period. lots of improvements possible, and i would love to see the evolution of those improvements, such that an end product could be made that could even be marketed. now, on that note, if you did eventually go to a roof solar cover, i would want to add stability mechanisms or blast and, pontoons to the sides. but i would also keep the transforming ability of folded panels, so then you could in theory have a single central panel on the roof, and a transforming flower like array built in, such that once deployed, the stationary roof panel is uncovered, and you increase the panel area immensely, without too much stability changes.
What a great project. I've always heard flexible solar panels have a short life unless they are kept free from excessive vibration and flex. I just subscribed to the channel to see future updates and projects. Thanks for the adventure.
Incredible job! I have been dreaming about doing something like this out here in Florida. Definitely want to do a roof design so I can get out of the brutal sun.
Now imagine this with rigid panels that can make 3x the power!
Glad that starfish survived the near miss with the anchor ;) great video as always.
If you use flexible solar panel I bet you could use them as a sail, too ;) And save on weight. Even the rigid ones could work this way. Alternatively, could add a pontoon so that it has the pontoon in the water when its lowered, to take stress off the panel.
While it's a cool idea to use flexible panels as a sail. It would sadly destroy the flexible panels pretty quickly.
Love the sightseeing around Seattle in these videos
Mounting solar panel on those bench is so smart!!
Amazing video
I have an idea I think you'd like if you ever do a roof. You could make a roof that is held up by 4 (or 3) robotically adjustable bars, that attach to the solar panel with ball joints. Then have those bars auto adjust via an array of light sensors (or anything, lots of solutions), to always have your panel pointed at the sun!
a three axis motion platform would require 6 struts, not 4 or 3, (unless you wanted a huge support in the middle of the boat,) and would be astronomically heavy and complex for a boat.
@@williamcampbell9859 Only one axis would be needed to replicate the existing solution, and three axes would never be needed - why would you need to swivel the panels?
@@MrManningata true, swivel is not necessary - two axes would be sufficient to quote "always have your panel pointed at the sun".
I hereby invite you to design a system with 3 or 4 linear actuators holding up the panel, attached via ball joints, that can rotate the panel in two axes.
I love every video you upload. Thanks for everything, such an inspiration for all hobby types!
Thoroughly enjoying the solar boat adventures! Cheers man!
Do you reckon you could make an automatic glider? It could fly forever
He already did it lel
His absolute refusal to say 'geese' keeps me watching.
14:56
That barges first stop is where I live. Cool to see it there!
Great concept. Imagine doing this commercially. Like you are on a lake vacation. And you rent an electric boat with solar panels shading your on the roof. You can chill, fish or even speed along the lake - with no emissions. Thats so cool. And it would not even be that expensive boat to build.
This is the kind of project I wanted to do at one point, unfortunately it's a bit pricey lll
🎉😂🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
Bros --- quality time with quality dudes and quality wisdom --- and of course quality subscribers -- thank you for this wonderful video --- we keep learning from you cool dudes
Was waiting for this for a while, glad the video is finally here :D
Auto angle optimizing solar panel mounts would be rad. Optical scheme for detecting direction of the sun with respect to the boat’s current heading. Use that information to control panel angle - elevation and maybe twist. Also include a sea state detection logic to put the panels at a safe angle when encountering waves. Future project.
Using the panels as a dronopad was fun.
Looking forward to the V2 boat! Should have a fixed roof and foldout panels too..
I loved seeing all the marine wildlife from the sub’s camera!
Great video ! Can'y wait to see the v2 ;)
Another awesome build.... time for a Lake Roosevelt test! Grand Coulee to the Canuck border would be a good test!
Towing the kayaks was a great idea. Great demonstration. Oh, and "push boat" ..... look it up.
I love it when I get to learn about a cool industry product or technical thing from a sponsor spot instead of just having the same trendy stuff that's in every RUclips video. I'll make an exception for your Factor ads because having a quick meal available in the shop or out testing a project is much more interesting than just eating them at home 😂
It would be interesting to see the difference in systems efficiency between these e-foil motors and electric trolling motors. I rigged up a similar system for dinghy propulsion several years back in Seattle with a 24V trolling motor and some lipo batteries. Worked pretty well, and they even have brushless trolling motors now as well. At least I knew the prop was close to optimal for the conditions. I didn't have color, but used the fixed panel on my sailboat to recharge them. Great series!
I've wanted to do this with a small party barge pontoon boat for a while now. Have a solar array on the roof with the batteries in / under the floor.
I was thinking of using high thrust trolling motors at each corner of it as sort of makeshift azipods.
It's one of the many "someday" projects bouncing around in my head.
this idea is amazing, you guys should definitely make a v2!
Looks like a fun time cruising around and looking at stuff. I think you could build a roof for the solar panels pretty quickly with a TIG welder (or maybe MIG with aluminum friendly wire?) That's a skill that would serve you well going forward. The precut parts would go together really easily, or you could make it out of tubing stock.
With welding skills from that, you could make a life-size tank with the tank tech you've been working on.
The most underrated part of the video is the CNC “fender cushions”
At 6:08 there is a wooden fishingboat with a norwegian flag! Neat! Your projects are nice to watch. Keep it up!!
Having owned one of the Wintech Cats for rowing coaching I can confirm that they are very easily drive and would make a great platform for your project. Just a lot more expensive than a renovated Boston!
This dog ist the cutest creature! Invite him/her more often. It's heartwarming.
A herd of gooses is called a "gaggle" of geese. It made me chuckle.
Nice video and great idea of the boat.
That is a cool proof of concept. I've been wanting to build a solar-powered boat for the last two years but my wife won't let me (yet). My plan is to use cellular PVC sheets (screwed and plastic welded) with a roof. The idea is the swivel the solar panels to close the sides of the roof area. For example, in good weather, the sun-facing side would be down and the opposite side would be fully up so both are facing the sun. In poor weather, the sides could be brought down to protect the passengers. The panels on the roof and battery could be used. I think the panel on the roof alone would be fine, at a slower speed. It's important to have ballast below when there is more weight up higher. I would put a thick keel on it with the batteries sealed in there. Actually, I was thinking about Skelcap super capacitors, instead of batteries. Supercapacitors won't lose life over any number or recharges and they charge faster. At first, a battery will have more capacity but this decreases over time until the battery is eventually useless.
Legend work as ever Daniel
I loved the industrial maritime tour. Excellent
Badass, im doing a similar project albeit snaller scale. Im just using a 10'2" plastic jon/bass boat with a 7' x 10' rectangular umbrella which ive tested at speed, in big waves, and high winds. The key is guide/support wires on all 4 corners which make it surprisingly stable. I just need to acquire some flexible light solar panels to mount on the top of the umbrella as im already powering it with a 700 watt trolling motor.
This tech should be present in all life boats out there
On the solar panels, i think that putting another hinge point in the middle of the solar panel would be a good idea. Then you can have both panels oriented in the sun simply by twisting the panel closest to the sun so it faces it and having the other regular. jm2c
Flipping love it, 3k views in the first 12 mins, you're a legend Daniel
This is very cool. I agree with your idea that a displacement hull would be a better choice. The locally made (North Bend) EPCarry pushes 10-14’ rowboats to roughly hull speed (4ish knots) on only 250W of power. The owner there also wrote a blog post a couple of years ago about playing with solar boats. Interesting takeaways there (besides the hull form) are his use of high aspect and long RC airplane props.
The ultimate conversion would be on a Duffy 21, the electric rental boats on Lake Union. They were designed by local sailing legend Bob Perry and are very efficient through the water. The standard motor and lead acid batteries could be greatly improved with BLDC motors and LFP batteries. The roof would give you lots of room for the solar array.
I look forward to seeing what comes next in this project. I’m a big sailor but also love EV boats. We have a 10’ Gig Harbor rowboat that is great with the EPCarry, but something longer and with solar would be a fun next step.
That was awesome nice job. Wheres the commercial start up lol!!!
Peter Sripol did one with the solar panel on the roof two years ago. Solar panels are a pretty cool idea if you're not in a hurry.
Amazing project, mate. Keep rolling.
I watched an Adam Savage Tested video the other day where he was following the build of a big cruise liner - interestingly they had their portal props in FRONT of the skeg so they always had clean water flow. You could try flipping the motors around!
Very relevant sponsorship!
super cool proof of concept
It always brightens up my day when this guy posts a new video! There’s something very relaxing and therapeutic about his videos.
This was a great video, cool to see all that stuff.
Nice underwater footage!
You’re a really clever fella, I’m impressed by every single one of your projects and tests.
… so, I was very surprised when you used the (non) word ‘gooses’ 😂. Geese mate, the plural is geese 😁👍
The way this is set up, you could use a pull configuration for the props, getting clean flow into them.
Awesome content as usual!!
Dude you are in a Boston Whaler that thing can take some waves. Great video
Looks like a great way to power a boat. Just add some motors that can adjust the angle of the panels
we need guys like him
C'est un projet superbe, un grand bravo à vous.
Excellent video. I really enjoyed the adventure. 😁