Can we pair the two same devices to each other one for TV and other for Headphone one connected with tv will transmit audio another connected with headphone will received audio
Thank you! I had had my blue tooth device hooked up to the smart tv so I could use my headset to watch tv while my elderly mom watched hers in the other room. I disconnected it to hook up to my pc to listen to pandora and couldn't get it to sync. Goofy me had it plugged in to the receiver side. Problem solved! Now I can listen to music while I clean! Now to check out the range on it! I hope it'll reach to the other end of the house.
Very clearly thoroughly presented. I appreciate the honest opinion of the quality make. I value the experience of the rater even though these days light does not confirm mediocrity. Although none of the brand names are familiar to me, I commend the maker on the wires included by which to facilitate one's needs. Thank you Guaging Gadgets.
I had my headphone jack on my laptop plugged into receive and tried to get it on my blue tooth headphones and it wouldn't work, your video now has my headphones linked. Thank you for uploading a great tutorial.
Our flat screen TV by Visio, supposedly does Bluetooth... NOT! So we got one like this. Our older amplifier does not have an A/B speaker system so you can listen to headphones and still use speakers. I have hearing problems: Tinnitus and noise in my head. Makes it hard to understand dialogue sometimes when watching TV. Meanwhile it gets annoying for my husband to have it so loud. Because our TV is hooked to the amplifier via HDMI, the audio out jacks are disabled. However, I found a work around as on the back of our cable box, there just happen to be RCA jacks and they work. The audio output from the cable box is the source of sound for the stereo. I think why the TV audio jacks don't work is that if HDMI is used, the audio jacks are disabled. So now my Logitech Bluetooth headphones work with the device and I can now listen to TV and watch some of our movie collection also with independent volume without having to mute the TV or if it is muted, does not affect the headphone volume. So it works great and the sound is just as good as when I use the same headphones with my iPad or Laptop PC. Where there is a will, there is a way.
Hi thanks for your video,I have sony home theater and projector and both have no facilities of Bluetooth ,now if if I want to play movie audio in my sony home theater without wire less then which way I can connect Please explain me Thanks
I tried connecting to my old school tv and bluetooth headphones.....when it connected it just played static. Sometimes it doesn't even connect. Any suggestions ?
I have exactly this receiver and transmitter and I can not understand to which one I need to connect my old LG tv (without Bluetooth) to receive or transmitte. So I conected it both ways. On the other end I have speaker - It did't work. I still hear tv - not speaker. Please HELP! what am i doing wrong? BTW, your video is good.
I was so excited to get this to work off of my computer but got dismayed because my Pamu slides don't work with this. My brother-in-law's Samsung Sound by AKG works really well with these. I don't have that kind of money so yeah, need to go a different route with different bluetooth earbuds.
HI, NEED TO KNOW. ONCE I CONNECT TO MY TV W/O BLUETOOTH TO MY WIRELESS HEADSET W/BLUETOOTH. ALL WORKS OK, IF I WANT TO GO BACK TO TV W/ MY SOUNDBAR SOLO SPEAKER, DO I NEED DESCONNECT THE ADAPTOR? ALL IS CONNECTED [ RCA CABLE ] IN BACK OF TV, UP WALL IS TV. WILL BE AN ISSUE TAKE TV OFF WALL AND DISCONNECT ALL AGAIN. HELP ME PLEASE, TY, NELSON.
Hi. Nice Video. If some one have a 10min shutdown problem let me know. The music is playing normally and after 10min the device is switch off. Any ideas why?
Hey Great video! but need help, are you able to use as a transmitter and receiver for example I have Webber Bluetooth thermometer but I run out of Bluetooth range can I connect this to the thermometer and put the transmitter between myself and thermometer to gain range ?
Do you know if you can transmit and receive using the device? For example, can i put one device on my TV to transmit and another device on my speaker to receive? Essentially creating a wireless setup.
I've been trying to charge this thing for the past months and it's not working. How does it work? I might got one that is not working right. And how long it needs to be charged so I know mine is working or not?
Can I connect 2 of these together?? Im trying to run sound from my projector to a pair of studio monitors without having wires. was thinking of getting one of these and have it on the projector as a transmitter then another one in the monitors as a receiver. Will that Work???
I have same device and tried to use it to send my mixer dj sound sound to a Bluetooth PA speaker but there was about a one second lag delay in the sound
Sir: connected the device via headphone jack of my receiver and transmits fine, the only problem is it transmits in MONO, no STEREO. Any advice? Thanks
Hello, i Just bought this transmitter, and i paired IT with my Urbanears Plattan 2 Bluetooth headphones (they both have blue led slowly blinking, which indicates, they are paired), but they are not playing any sound. Plattans do work well with smartphones, and the transmitter also works with other devices (portable speaker etc), but they do not work together. I have reset the headphones, but IT did not help. Do you have any idea, why there is no sound?
I just bought one of these Bluetooth Transmitter & Receiver from ebay and I found out that it is only transmitting in mono but not in stereo as I recently had connected this up to my mp3 players 3.5mm stereo socket using a stereo 3.5mm audio cable and paired it with one of my stereo bluetooth speakers but the sound was coming out in mono but not in stereo but if I use it as a bluetooth receiver and connect it up to my bluetooth stereo speaker and pair it to my phone and then play music then its outputting in stereo.
Hey, great video, thanks. However, I'm interested in the 'Speaker' that you use in the beginning of the video. A review on that would be welcome as well, can you help?
Hello, thank you for your kind words about the review. The first speaker is the Mpow Armor you can find my review via this link ruclips.net/video/yo10vEeWfN8/видео.html Thank you for watching and please consider subscribing 😀
I have this device and it is only pairing with only the one speaker bluetooth device I've used in the beginning And Now it cannot connect to any other bluetooth speakers. Do you know how i can do it?
I have a projector (Hitachi CP-X3030WN)that is not Bluetooth and a Bluetooth speaker (ION Block Rocker) that is Bluetooth. The projector has speakers in it but not loud enough. Will this work?
Some tv’s come with what may look like a 3.5 mm jack input, However: if the inner part of the input has a color light green ring within it This means it is a DIGITAL out connection source and the Bluetooth device you are attempting to connect into that source will not Work because the Bluetooth device is an ANOLOG device, Therefore; you must purchase a DIGITAL Audio -to- ANOLOG audio converter in Order to get the Bluetooth transmitter to work.
I'm trying to connect my car stereo to a Marshall Kilburn Bluetooth speaker. I can get this thing transmitter to pair to a small cheap speaker, but can't get it to pair with a $300 speaker. Any secrets?
I am a hobbyist musician. I bought this thing about a year ago, and returned it. It gave crystal clear sound; but it gave a one second delay between each piano key strike. I run my own recording studio; since If I hired someone... I would be too old and white. Now I crave this device because of clarity of sound. I want to ask one question if anyone can help me out. Can I run one transmitter and two receivers; instead of one receiver?
Great review! I also tested this device. Well actually a differently branded (noname) version but obviously with the same electronics inside. Receiver works but I was unable to pair transmitter to JBL Extreme speaker or Sennheiser Momentum headphones. By the way - if you manage to get the device to hang (not reacting to button or anything) like I did - it is possible to reset it by pressing a hidden button by pushing a long narrow pin into the receive plug socket. Use a toothpick or similar non-conductive pin. The reset will shut it down.
Is it possible to use this device for connecting two bluetooth headphones at the same time with the computer/laptop, to get the audio in both headphones?
Am facing the same prob , i think its only for one blootooth device, device features shows that it is possible to connect 4 headset but in actual its not possible even for two headset also , i think just make us fool about that product
if i use in transmitter can i connect 4 headset and speaker i mean many receiving devices works all same time? also can i purchase two one set to receiver one to transmitter and both works same time
bro can we connect a lavalier microphone to the Bluetooth and can we record the audio? bytheway Bluetooth connected to phone and record using inbuilt record app?
Does anyone know how to get such a feat to work? I want to connect my TV the transmitter via cable and let another unit receive it via Bluetooth and connect my speakers to it.
Cannot use 2 of these at same time? I want to send audio from my tv to my old stereo receiver. Neither one being bluetooth capable. I need both...receiver and transmitter . But you can't link two of these together. Can you?
why didn't you show us that it works on a non blu tooth TV to my blu tooth headphones? so far it don't work and that it the only reason I bought it... I tried it in every way I could think of .. yes I have Audio Out (headphone) plus the regular out jacks for audio (red & white) My television is a Sharp Aquos Quattron .. it has everything but blu-tooth .. lol .. however it is 5 years old.. but to date, I have not found another TV with a better picture.. am I missing something here?
I hope you got your system running long time ago. But think of how your sound and picture are routing, if going from a cable box to your amplifier via HDMI, then the sound is stripped out and routed to your speakers, when the picture shows up at the tv, all it can do is display picture. The RCA jacks and headphone jack is non-functional because the sound stopped being routed to the TV. The answer is to use the RCA jacks on the back of the cable box as these contain audio and then the device will work with any Bluetooth headphone, even those designed explicitly for computer or iPad. Mine is Logitech H800 and works perfectly even controlling independently volume. This does not work to shut off sound to the amplifier but the amplifier can be muted or the sound turned way down. Hope you got it working and didn't throw your device away. Please note that in patching the RCA jacks ahead of the amplifier, your audio signal is slightly in front of the audio from the amplifier. If you had an audio receiver which had an output to speakers you are not using, these RCA jacks would work too however you would unlikely be able to control the volume independently of the main system unless it was in a speaker A, speaker B switch. The slight out of sink is not bad for me really as I have very bad tinnitus and for me to hear the vocal part means my poor husband gets blasted out. Ah, marital bliss again.
Charles Murphy Do you have an amplifier for a Surround Sound home theater sound system? In most cases your TV is now HDMi and the amplifier has HDMI inputs. When the HDMI output is coming out of the amplifier, it no longer transmits sound as your sound is routed to the more powerful speakers of your theater sound system. Then there is NO SOUND which comes from the headphone jack or the RCA audio jacks off the back of the TV. So it can't pair when there is no input. What good would it be if there was no sound anyway? If you have a cable box the path of the signal goes from the cable box to the amplifier and then the picture is split to the TV as I explained. If you do not want to hear sound from your amplifier, your cable box will in most cases have RCA jacks out. You have to catch the sound before it goes to the amplifier. I have my device then plugged in on the "transmit" side. This then transmit the audio to my bluetooth headphones. It takes some time to pair. Your bluetooth device often can hold pairing information for up to 6 devices like my Logitech H800 bluetooth headphones. So I can use it with my iPad, my laptop or the TV via the cable box. BUT, I have to disable the bluetooth reception in the devices I am not pairing with or shut them off. Then I have no problem with pairing. If I tell my iPad in Settings under Bluetooth to "Forget this device", then I have to pair it again when I want to use the headphones with the iPad. You may find if you have the unit plugged into charge via USB, that it will not pair. Unplug the charging cord and pair with your headphones and you will pair up immediately. If you have your amplifier on, you will notice that the sound in the headset is slightly in front of what you hear from the speakers. So it seems a bit like an echo. I just ignore this as I use the headset to hear dialogue and as movies on DVD or BlueRay often have the instrumental part turned so high that dialogue is hard to hear. This has greatly enhanced my ability to hear dialogue. Are the directions complete on how to use every system in the world we may be using? No. But it does work. I've tried it with my Yamaha keyboards but there is severe latency (lagging of audio) from when I play a key. (I was just experimenting as then I understand the bluetooth function of the unit.) What the receive function does is if I had music in iTunes I wanted to play to my amplifier, then I would patch the wires from the unit to the "Receive" port and to input to the amplifier and I could then hear music off my iPad, this would work also with my HP laptop. It would not work with my older Mac Pro Tower as it has a different definition of bluetooth and is not compatible with this unit or iPads which are older than IPad 3 or 4. IPad 2 users are out of luck as the newer definition would be what this unit uses. I have not tested it, but it would be reasonable. It basically adds Bluetooth to anything with a head phone jack or an audio line out. I have a Crowley record player with a CD player and I've listened to my CD on my Bluetooth headset. Once you get it to work with the line out of any device, you know it works, you can move to your TV and amplifier and cable box and see where to patch in ahead of the HDMI split to get audio. Sorry this is long but there is no way around explaining it apart from reading.
Hi. Do you have any problem like loosing pairing when in transmit mode, or the sound stopping playing in the headphones? I have one recently, and trying to send my TV sound to my Bluedio 2+ headphones. But the transmission of sound or parring continues to fall. And the sound quality is not that great...
Hello! No speaker is required, you can connect it to anything that is wired. Please let me know if you have any other questions. Thank you for watching!
How to hook it up to a t.v. Unsync your phone plug in the reciever either to transmit tonrecieve.then turn it on and then pair the headphones to the adapter and itll sync right up. Shut off your volume on your t.v. and yu can listen too it without waking up the house
I have a Samsung smart TV with ability to recognize blue tooth speakers, but it has no audio outputs not even earphone, it does have optical output, I have a older Stereo system with good sound made in the early 2000's it has audio inputs, is there any device that you know of that my Samsung Smart TV will see as bluetooth speakers so I can listen to audio on my older stereo system? I like my older stereo because it has deeper bass sounds and better overall frequency quality than the tinny small tv speakers or even a soundbar
If you haven't figured it out yet, if it's like mine, hold the button in on your headset until the light flashes blue, do that with the transmitter too and then wait for both to stay blue. I've had to unplug my blue tooth tranmitter/receiver device from the charger for it to work.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
This video clearly explained the purpose and differences between transmitting and receiving - something that other videos fail to do.
I used to confuse with Bluetooth transmitter and receiver. Your video presented these two concepts very clear. Thanks 😊
TYVM! Finally I learned to use it 100%
Can we pair the two same devices to each other one for TV and other for Headphone one connected with tv will transmit audio another connected with headphone will received audio
Fantastic. Good video made it simple. Thanks for taking the time.
Thank you! I had had my blue tooth device hooked up to the smart tv so I could use my headset to watch tv while my elderly mom watched hers in the other room. I disconnected it to hook up to my pc to listen to pandora and couldn't get it to sync. Goofy me had it plugged in to the receiver side. Problem solved! Now I can listen to music while I clean! Now to check out the range on it! I hope it'll reach to the other end of the house.
Very clear description and explanation helped a lot, thank you so much
Very clearly thoroughly presented. I appreciate the honest opinion of the quality make. I value the experience of the rater even though these days light does not confirm mediocrity. Although none of the brand names are familiar to me, I commend the maker on the wires included by which to facilitate one's needs. Thank you Guaging Gadgets.
Can you connect one of these to speaker and one to stereo and make the system wireless ?
Hi guys.
Were you able to connect to a headphone? I'm trying to connect to a Bluedio T5 with no success.
Thanks in advanced
I had my headphone jack on my laptop plugged into receive and tried to get it on my blue tooth headphones and it wouldn't work, your video now has my headphones linked. Thank you for uploading a great tutorial.
Our flat screen TV by Visio, supposedly does Bluetooth... NOT! So we got one like this. Our older amplifier does not have an A/B speaker system so you can listen to headphones and still use speakers. I have hearing problems: Tinnitus and noise in my head. Makes it hard to understand dialogue sometimes when watching TV. Meanwhile it gets annoying for my husband to have it so loud.
Because our TV is hooked to the amplifier via HDMI, the audio out jacks are disabled.
However, I found a work around as on the back of our cable box, there just happen to be RCA jacks and they work. The audio output from the cable box is the source of sound for the stereo. I think why the TV audio jacks don't work is that if HDMI is used, the audio jacks are disabled. So now my Logitech Bluetooth headphones work with the device and I can now listen to TV and watch some of our movie collection also with independent volume without having to mute the TV or if it is muted, does not affect the headphone volume. So it works great and the sound is just as good as when I use the same headphones with my iPad or Laptop PC.
Where there is a will, there is a way.
Big help🔥🔥
Thanks, nice clear tutorial that's to the point.
se escucha mono o estereo ?,.. puedes hacer la prueba de sonido; audio canal izquierdo, canal derecho ?? y nos cuentas ..!!
Could you please confirm if we can use both the Jack's simultaneously for calling purpose as mic and speaker output.
I am just wondering how to get it in blue tooth connectivity. Mine just shows a slow blue blinking light, not the rapid blinking light
Will this work with with multiple surround sound speakers
Hi thanks for your video,I have sony home theater and projector and both have no facilities of Bluetooth ,now if if I want to play movie audio in my sony home theater without wire less then which way I can connect
Please explain me
Thanks
nice gadget for listening to music , not for TV or making music because of big delay !!!
is there any lattency time for audio transfering
will this bring in the audio from the mixer out to iphone inbult bluetooth? i want to record audio from mixer to iphone while shooting
How do you attach to older Bravia tv without Bluetooth and connect to Sony noise cancelling headphones mx4?
Tia
I tried connecting to my old school tv and bluetooth headphones.....when it connected it just played static. Sometimes it doesn't even connect. Any suggestions ?
I have exactly this receiver and transmitter and I can not understand to which one I need to connect my old LG tv (without Bluetooth) to receive or transmitte. So I conected it both ways. On the other end I have speaker - It did't work. I still hear tv - not speaker. Please HELP! what am i doing wrong?
BTW, your video is good.
How do you make it works in a tv???
Unfortunately I couldn't pair it with my TWS L21 earbuds
I was so excited to get this to work off of my computer but got dismayed because my Pamu slides don't work with this. My brother-in-law's Samsung Sound by AKG works really well with these. I don't have that kind of money so yeah, need to go a different route with different bluetooth earbuds.
Friend, does it need some configuration or is it just plugging?
How do you make phone calls with this thing? Why can't you use TX and RX at the same time?
HI, NEED TO KNOW. ONCE I CONNECT TO MY TV W/O BLUETOOTH TO MY WIRELESS HEADSET W/BLUETOOTH.
ALL WORKS OK, IF I WANT TO GO BACK TO TV W/ MY SOUNDBAR SOLO SPEAKER, DO I NEED DESCONNECT THE
ADAPTOR? ALL IS CONNECTED [ RCA CABLE ] IN BACK OF TV, UP WALL IS TV. WILL BE AN ISSUE TAKE TV OFF
WALL AND DISCONNECT ALL AGAIN. HELP ME PLEASE, TY, NELSON.
I want to transmit audio from a projector to a soundbar. Do I have to do the manual pairing every time when the devices turned on?
Hi. Nice Video. If some one have a 10min shutdown problem let me know. The music is playing normally and after 10min the device is switch off. Any ideas why?
Hey Great video!
but need help, are you able to use as a transmitter and receiver for example I have Webber Bluetooth thermometer but I run out of Bluetooth range can I connect this to the thermometer and put the transmitter between myself and thermometer to gain range ?
Is there a Bluetooth similar device that you can just plug into a wall outlet for electricity so you don't experience the battery going dead.
Do you know if you can transmit and receive using the device? For example, can i put one device on my TV to transmit and another device on my speaker to receive? Essentially creating a wireless setup.
Can this transmitter and receiver communicate to each other? Input source to transmitter and then send to receiver with output line out?
I've been trying to charge this thing for the past months and it's not working. How does it work? I might got one that is not working right. And how long it needs to be charged so I know mine is working or not?
Can you pop it open and tell us what battery is inside? Ive ordered the batteryless option from ali. 8AUD.
Can I connect 2 of these together?? Im trying to run sound from my projector to a pair of studio monitors without having wires. was thinking of getting one of these and have it on the projector as a transmitter then another one in the monitors as a receiver. Will that Work???
Did you ever get that to work?
will this xmitter work with digital/audio outlet ONLY on NEW TV's ?
it actually is hollow inside there''s a small pcb sum like 3cm x 4cm and a small lithium battery
I have same device and tried to use it to send my mixer dj sound sound to a Bluetooth PA speaker but there was about a one second lag delay in the sound
nice review.. thanks
I have this device connected to tv audio jack and then my mobile to this device via Bluetooth and then can I use my mobile headphone to hear tv audio?
Sir: connected the device via headphone jack of my receiver and transmits fine, the only problem is it transmits in MONO, no STEREO. Any advice? Thanks
I have the same problem. Maybe he would hear that if he tried to connect unit to the real stereo system in this video...
Hello, i Just bought this transmitter, and i paired IT with my Urbanears Plattan 2 Bluetooth headphones (they both have blue led slowly blinking, which indicates, they are paired), but they are not playing any sound. Plattans do work well with smartphones, and the transmitter also works with other devices (portable speaker etc), but they do not work together. I have reset the headphones, but IT did not help. Do you have any idea, why there is no sound?
Hi, I have 5.1 surround system which has three 3.5 output jack. Is there any device that can transmit Bluetooth with three 3.5 jacks?
I just bought one of these Bluetooth Transmitter & Receiver from ebay and I found out that it is only transmitting in mono but not in stereo as I recently had connected this up to my mp3 players 3.5mm stereo socket using a stereo 3.5mm audio cable and paired it with one of my stereo bluetooth speakers but the sound was coming out in mono but not in stereo but if I use it as a bluetooth receiver and connect it up to my bluetooth stereo speaker and pair it to my phone and then play music then its outputting in stereo.
Hi there. i tried to connect to 2 different Bluetooth Earbuds and it didnt work. do you know if there is any limitation for earbuds use? thanks
Hi , I need help. I would like to take my internet signal 300 feet into my garden, are there any solutions for that?
I have a problem.. the blue lamp is off and the red lamp in receiver is on. How to fix it?
Cant use walkman kaset to xiaomi airdot headset please comment
Can I operate this one place to nother place like office to home
dose it wirelessly receive and transmit at the same time from bluetooth tv to bluetooth head phone.
Hey, great video, thanks. However, I'm interested in the 'Speaker' that you use in the beginning of the video. A review on that would be welcome as well, can you help?
Hello, thank you for your kind words about the review. The first speaker is the Mpow Armor you can find my review via this link ruclips.net/video/yo10vEeWfN8/видео.html
Thank you for watching and please consider subscribing 😀
I have this device and it is only pairing with only the one speaker bluetooth device I've used in the beginning And Now it cannot connect to any other bluetooth speakers.
Do you know how i can do it?
I have a projector (Hitachi CP-X3030WN)that is not Bluetooth and a Bluetooth speaker (ION Block Rocker) that is Bluetooth. The projector has speakers in it but not loud enough. Will this work?
Some tv’s come with what may look like a 3.5 mm jack input, However: if the inner part of the input has a color light green ring within it
This means it is a DIGITAL out connection source and the Bluetooth device you are attempting to connect into that source will not
Work because the Bluetooth device is an ANOLOG device, Therefore; you must purchase a DIGITAL Audio -to- ANOLOG audio converter in
Order to get the Bluetooth transmitter to work.
Cool! Have you tried transmitting from TV to BT Headphones?
I want to know this as well
Can this be used to transmit audio to more than 1 speaker?
EXCELLENT EXPLANATION...!!
Is there a reset for this device? If so how do u do it?
Read the reply’s to people’s comments. That is how I got it to finally work.
how to connected to the TV please explain
Hi dear, could you suggest any headset model that works fine with this device? I already bought two models that didn't work!
Can you do both at same time ?
can it transmited to two bluetooth headset at same time?
I'm trying to connect my car stereo to a Marshall Kilburn Bluetooth speaker. I can get this thing transmitter to pair to a small cheap speaker, but can't get it to pair with a $300 speaker. Any secrets?
I am a hobbyist musician. I bought this thing about a year ago, and returned it. It gave crystal clear sound; but it gave a one second delay between each piano key strike. I run my own recording studio; since If I hired someone... I would be too old and white. Now I crave this device because of clarity of sound. I want to ask one question if anyone can help me out. Can I run one transmitter and two receivers; instead of one receiver?
Great review! I also tested this device. Well actually a differently branded (noname) version but obviously with the same electronics inside. Receiver works but I was unable to pair transmitter to JBL Extreme speaker or Sennheiser Momentum headphones. By the way - if you manage to get the device to hang (not reacting to button or anything) like I did - it is possible to reset it by pressing a hidden button by pushing a long narrow pin into the receive plug socket. Use a toothpick or similar non-conductive pin. The reset will shut it down.
This reset advice just solved my non-connection problem. Reset was inside the Transmit socket on mine, so you should try both.
Sir my mobile sound in the TV by this device its can possible.
Plz reply
Can it transmit and recieve at the same time?
Cant use walkman cassete to speaker non bluetooth please comment
It is working continuously while charging? thanks
Yes, it can be used while charging.
Can you please test the range of connectivity in feets or meters and tell ?
10 meters
Is it possible to use this device for connecting two bluetooth headphones at the same time with the computer/laptop, to get the audio in both headphones?
Am facing the same prob , i think its only for one blootooth device, device features shows that it is possible to connect 4 headset but in actual its not possible even for two headset also , i think just make us fool about that product
Does it work with a blue tooth headset?
what if the bluetooth is flat and we use normal headphone, can it work? Thx
if i use in transmitter can i connect 4 headset and speaker i mean many receiving devices works all same time? also can i purchase two one set to receiver one to transmitter and both works same time
It inly works for one device at a time so you would need 2 for 2 headphones and ab audio splitter.
bro can we connect a lavalier microphone to the Bluetooth and can we record the audio? bytheway Bluetooth connected to phone and record using inbuilt record app?
PaperBoy probably
Can you pair two of these devices to trasmit from one and recieve from the other device?
Did you try it? Would love to know.
Hi. What is the charging time? How much play time? What kind of adapter can be used to charge it?
mini usb about 8 hr play time 2 hr charge time see manual
Can two devices be paired (one in transmitter another in receiver mode)?
Dávid Kiss need to know this too.
no it does not. once connected, does not discover to other device
that sucks, I wanted to transmit my tv to be received by another one for speakers
Does anyone know how to get such a feat to work? I want to connect my TV the transmitter via cable and let another unit receive it via Bluetooth and connect my speakers to it.
b.x.b L.J k did you find any device that works for both transmit and receive? I’m having a hard time finding one
Cannot use 2 of these at same time? I want to send audio from my tv to my old stereo receiver. Neither one being bluetooth capable. I need both...receiver and transmitter . But you can't link two of these together. Can you?
I want to know too :(
How do you do your television
why didn't you show us that it works on a non blu tooth TV to my blu tooth headphones? so far it don't work and that it the only reason I bought it... I tried it in every way I could think of .. yes I have Audio Out (headphone) plus the regular out jacks for audio (red & white) My television is a Sharp Aquos Quattron .. it has everything but blu-tooth .. lol .. however it is 5 years old.. but to date, I have not found another TV with a better picture.. am I missing something here?
I have a brand new Phillips 500 series smart tv. Non Bluetooth but want to pair it with my Pyle 300bt Bluetooth speaker
You have to set it up to the output audio of the cable box or satellite.
I hope you got your system running long time ago. But think of how your sound and picture are routing, if going from a cable box to your amplifier via HDMI, then the sound is stripped out and routed to your speakers, when the picture shows up at the tv, all it can do is display picture. The RCA jacks and headphone jack is non-functional because the sound stopped being routed to the TV.
The answer is to use the RCA jacks on the back of the cable box as these contain audio and then the device will work with any Bluetooth headphone, even those designed explicitly for computer or iPad. Mine is Logitech H800 and works perfectly even controlling independently volume. This does not work to shut off sound to the amplifier but the amplifier can be muted or the sound turned way down.
Hope you got it working and didn't throw your device away.
Please note that in patching the RCA jacks ahead of the amplifier, your audio signal is slightly in front of the audio from the amplifier. If you had an audio receiver which had an output to speakers you are not using, these RCA jacks would work too however you would unlikely be able to control the volume independently of the main system unless it was in a speaker A, speaker B switch.
The slight out of sink is not bad for me really as I have very bad tinnitus and for me to hear the vocal part means my poor husband gets blasted out. Ah, marital bliss again.
DragonLord721 I have the same problem. Won’t pair with the tv audio out.
Charles Murphy Do you have an amplifier for a Surround Sound home theater sound system? In most cases your TV is now HDMi and the amplifier has HDMI inputs. When the HDMI output is coming out of the amplifier, it no longer transmits sound as your sound is routed to the more powerful speakers of your theater sound system. Then there is NO SOUND which comes from the headphone jack or the RCA audio jacks off the back of the TV. So it can't pair when there is no input. What good would it be if there was no sound anyway?
If you have a cable box the path of the signal goes from the cable box to the amplifier and then the picture is split to the TV as I explained. If you do not want to hear sound from your amplifier, your cable box will in most cases have RCA jacks out. You have to catch the sound before it goes to the amplifier. I have my device then plugged in on the "transmit" side. This then transmit the audio to my bluetooth headphones.
It takes some time to pair. Your bluetooth device often can hold pairing information for up to 6 devices like my Logitech H800 bluetooth headphones. So I can use it with my iPad, my laptop or the TV via the cable box. BUT, I have to disable the bluetooth reception in the devices I am not pairing with or shut them off. Then I have no problem with pairing. If I tell my iPad in Settings under Bluetooth to "Forget this device", then I have to pair it again when I want to use the headphones with the iPad.
You may find if you have the unit plugged into charge via USB, that it will not pair. Unplug the charging cord and pair with your headphones and you will pair up immediately.
If you have your amplifier on, you will notice that the sound in the headset is slightly in front of what you hear from the speakers. So it seems a bit like an echo. I just ignore this as I use the headset to hear dialogue and as movies on DVD or BlueRay often have the instrumental part turned so high that dialogue is hard to hear. This has greatly enhanced my ability to hear dialogue.
Are the directions complete on how to use every system in the world we may be using? No. But it does work. I've tried it with my Yamaha keyboards but there is severe latency (lagging of audio) from when I play a key. (I was just experimenting as then I understand the bluetooth function of the unit.)
What the receive function does is if I had music in iTunes I wanted to play to my amplifier, then I would patch the wires from the unit to the "Receive" port and to input to the amplifier and I could then hear music off my iPad, this would work also with my HP laptop. It would not work with my older Mac Pro Tower as it has a different definition of bluetooth and is not compatible with this unit or iPads which are older than IPad 3 or 4. IPad 2 users are out of luck as the newer definition would be what this unit uses. I have not tested it, but it would be reasonable.
It basically adds Bluetooth to anything with a head phone jack or an audio line out. I have a Crowley record player with a CD player and I've listened to my CD on my Bluetooth headset.
Once you get it to work with the line out of any device, you know it works, you can move to your TV and amplifier and cable box and see where to patch in ahead of the HDMI split to get audio.
Sorry this is long but there is no way around explaining it apart from reading.
Is the sound compressed?
How do you hook it up to a tV?
Could I connect this to the aux of my car, then plug in a bluetooth iPod transmitter into my ipod classic and connect the two?
Yes, that should work. Let me know how it goes. Thanks for watching!
How do i know when it's fully charged?
And how long does it need to charged?
2hrs for full charge. It can be used while charging however.
Hi can I connect this to my hi fi.. So I can use my Bluetooth headphones
Yes, that will work.
@@GaugingGadgets thank you,
😊
Hi. Do you have any problem like loosing pairing when in transmit mode, or the sound stopping playing in the headphones?
I have one recently, and trying to send my TV sound to my Bluedio 2+ headphones. But the transmission of sound or parring continues to fall. And the sound quality is not that great...
Hi Vitor.
I have a Bluedio T5, but it's not paring with the transmiter. How did you get that?
Do I have to use a 'speaker'? Can I use a wired headset or ear buds in receiver mode?
Hello! No speaker is required, you can connect it to anything that is wired. Please let me know if you have any other questions. Thank you for watching!
How do I pair it to tv???
How to hook it up to a t.v.
Unsync your phone plug in the reciever either to transmit tonrecieve.then turn it on and then pair the headphones to the adapter and itll sync right up. Shut off your volume on your t.v. and yu can listen too it without waking up the house
I have a Samsung smart TV with ability to recognize blue tooth speakers, but it has no audio outputs not even earphone, it does have optical output, I have a older Stereo system with good sound made in the early 2000's it has audio inputs, is there any device that you know of that my Samsung Smart TV will see as bluetooth speakers so I can listen to audio on my older stereo system? I like my older stereo because it has deeper bass sounds and better overall frequency quality than the tinny small tv speakers or even a soundbar
how many headphones connect at a time this device
Big help
Hey man! Congratulations for the video! But I can't pairing It with my Bluedio Headset. Could You give me some tip about it? Tks
If you haven't figured it out yet, if it's like mine, hold the button in on your headset until the light flashes blue, do that with the transmitter too and then wait for both to stay blue. I've had to unplug my blue tooth tranmitter/receiver device from the charger for it to work.