Making a Powerful Belt Sander Using Bearings
HTML-код
- Опубликовано: 4 авг 2020
- Project no.103 Diy Belt sander
Recent years, i built many kinds of Belt Sander but this is the most powerful and simple looking Machine,
This project comes with a 1.5hp induction motor, i used 6204 and 6205 bearing for belt rollens, and a Gas Strut for the Belt tension.
for the belt i used 50x686mm Belt Sander.
LINKS THAT HAS BEEN USED IN THE VIDEO:
Sanding Belts: sea.banggood.com/custlink/3D3...
YOU CAN SUPPORT THIS CHANNEL BY BUYING THIS ITEMS.
Machifit MGN12H Linear Rail Block：bit.ly/2WFBoyn
Machifit MGN12 600mm Linear Rail Guide with MGN12H Block: bit.ly/2HT4WVP
Machifit MGN12 1000mm Linear Rail Guide with MGN12H Linear Sliding Guide Block: bit.ly/2FSsVSF
8mm Bore Diameter Pillow Block Ball Bearing: bit.ly/2OJeHX3
7pcs 12mm Shank CNC Lathe Turning Tool Holder Set: bit.ly/2K4VBMy
G1/4-19 13x2mm BSP 55 Degree Tap: bit.ly/2TSVnrB
Titanium Coated Deburring External Chamfer Tool: bit.ly/2OG5HCi
Pillow Block Bearing: bit.ly/2uE97MG
Push-pull type fast clamp: bit.ly/2FQ5k3N
2032mm x 13mm Saw Blade: bit.ly/2QRKYQb
Handheld Copper Pipe Tube Expander: bit.ly/2rWa6pW Hu
SBR20-1200mm linear rail and SBR20UU Blocks: bit.ly/2RiKUIC
SBR16 1000mm Linear Rail and SBR16UU Bearing Blocks: bit.ly/2GIcniW
Drillpro Turning Tool Post Holder: bit.ly/2EUban5
SANOU K12-100 Lathe Chuck: bit.ly/2TextHc
Slide Bearing Block: bit.ly/2RhZe4d
Slide Bearing Block: bit.ly/2Q6K4tU
20Pcs Diamond Coated Core Drill Bit Set: goo.gl/mPZ4B6
Opening Locator: goo.gl/sQmMce
LIKE MY FACEBOOK PAGE / pinoydiybuilds
SUBSCRIBE TO MY CHANNEL / sekaustria
AND SUPPORT ME ON PATREON / sekaustria
Like Share Subscribe for a Weekly Videos
#diy #beltsander 
Наука
lucky for those who find this channel, can get knowledge that has many benefits, loyal greetings from Indonesia 🙏🙏🇮🇩🇮🇩
*Cool hell belt sander !* 👍👍👍
Thanks bro
Man, im telling you, this guy has got cahones, no way would i be drilling, grinding, and lathe work with shorts and sandels, highcheemama!!!
Satu satunya yang disukai kerana simple dari banyak video yang aku tengok.
I like it so much I'm going to try to do this
Nice idea bro.
Kunting mahinang background music maman dyan bro🤔
Ma try nga hehe
Mas maganda pure tunog ng tool. Iwas pa sa mga report sa copy rights ng kantang gagamitin sa back ground. Masilan si youtube😁
Simply gorgeous work! I watch all your videos with pleasure!
Terima kasih ilmunya, dengan munculnya video ini memberi gambaran kepada saya untuk membuat nya seperti ini, sekali lagi terimakasih, semoga murah rezekinya, aamiin
Pretty fantastic work, dude! Really nicely done!!! 😃
Stay safe there with your family! 🖖😊
Thanks brother
Wow. No more things. Unit complete. Compact machine. Thank you.
Together with your fantesy your hand help like a profesional beruf, and result is verry yousefful and nice. Thanks for your explaning!
What did you say??? In English?? I tried to translate but did not know what language you started with??? Sorry
.m
Todo bien hermano
@@troykinnison4575 ji no ji uhu no BU ji
Very good work !
Absolutely fantastic video new sub here just going through your older videos now love your channel keep up the great work
Magaling ka men! Astig!
I got mine yesterday and it works well, thanks sir Sek Austria for the beautiful build. It is very helpful in my knife making activities. Godbless and more power. #Support local
Wow! Thanks for the feedback sir godbless you.
aw man.....i dont have a lathe, guess i'll just angle grind the groove for the outward locking spring clips....oh well. it'll work, or spot weld a washer to the big axle to retain the bearings' wheel....a spring for tension, as this will not loose its' pressure.....
Молодец, руки золотые.
Top que show parabéns.
Ficou muito bacana gostei 👍 👍 👍 👍 👍 👍 👍 👍
Nice work! 👍👍👍
самодельщики есть во всех странах,но у нас их больше))))
Nice clean work as always. We featured this video in our homemade tools forum this week :)
+++++ ! Отличная работа!
احسنت صنعا ياصديقي 😊
Отличная работа ! Лайк однозначно.
Wow its aperfect nice bro,
Muy bueno!!!
Nice, good job!👌
Awesome!!!!!!👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
Love this sander
Thanks
Moc pěkný 👍👍👍
TRABALHO NOTA 10 PARABÉNS GUARULHOS SP BRASIL
Another great project. 👍👍👍
Thanks sir
Caramba mano, me ajudou muito , estão de parabéns
Я построил по его видео, сверлильный станок, теперь и гриндер сделаю, у этого мастера все просто и понятно.
Great job. Good looking little machine.
1 question.
Did you mean to grind that chisel down like that?
It seems a bit… counter productive?
Anyway… thanks, for sharing!
Superly and cool idea's
Btw. I am Selling this project available only in the philippines.
To my fellow Pinoy you can contact me on my fb page. Take care guys
must be protected,. Обязательно нужно ставить защитный экран!
Dez pelo projeto e vídeo. Moro em Caucaia-Ceará-Brasil.
Woow this is what I'm looking for I hope I can make it too ☺
Yes you can. If you dont have a lathe you can use a 1/2 pipe together with 6204 bearing.
@@SekAustria okay ready I'll try to make it 😊
@@SekAustria or just like your build, only spot weld a washer (center hole) to the large axle, to retain bearings..... YOU CAN DO IT, bro !!
Под искры поставить тазик с водой - будет ловить опилки и всегда есть где заготовку охладить.
Super robota.. Pozdrawiam 👍👍🇵🇱😊
Muito bom, show.
bravo
Обрежь кусок камеры автомобиля и натяни на шкив -ведущий ролик Мотора он мягче и тише будет работать
Subscribed! galing ng kapwa pinoy!
Safety first palagi boss
شكرا.لك.اتمنى.لك.التوفيق.والتقدم.في.هذا.المجال..
Totally awesome saweet
NICE PA!
Great idea sir...hope to see more great job...thanks
Gostei muito vou fazer uma 3 .
I tried more than 1 year but still failure, I wish my channel was also turned on making money as your channel !!
Хороший и мощный гриндер👍👍👍👌
gosto da sua criatividade
멋집니다
Молодец, черт не русский. Лайк.
¡Trabajo fantástico! 👏👏👏
Супер
thanks for sharing this great project! could you tell me the advantage to use 3 rollers instead of only???
Less clibrations
Sweetheart and very nice video thanks
Coisa linda
Nice galing nyo po kuya
Salamat po pare 🤣😂
Very Nice
LOUD DRILLING, LOUD CUTTING, LOUD ROCK AND ROLLING,
REALLY I HAVE ENOUGH L O U D IN MY GARAGE. Great build other than volume needs to drop.
Thumbs up thanks
Love👍
Magandang ang gawa mo boss
Does anyone in Asia minor buy tools? I got shedfull of tools I don't know how to use, and this dude is making a belt sander from odd bits. GENIUS!
Gostei daquele torninho esperto que eu vi inteiro ali no canto 👍👍👍👍
I am joint with yiu. i am from indonesia, that you are very creative to do something.
It is powerful, yes. But has no enough space around work table. It will limit result size.
I LOVE THAT HE USES THE MOTOR TO MAKE THE WOODEN WHEEL.
THIS IS A TOTAL 'in house' build'. no external parts needed......ha ha . why not ? make the most efficient use of anything....
@@petersack5074 100%!!!! I wish I could "SEE" those type of EASY! HELPFULL! parts to MY builds!!! OTHERS make it look SOOOOO easy!! Like they rolled out of bed this morning an just built a $1000$??? ISH?? MACHINE THAT LOOKS AND WORKS like this!!!
@@petersack5074 ALSO??
I LOVE YOUR NAME!!
I can only imagine the stories you have ,if that is your real name?, that you must have??!! Especially when you an ya buddies got to be about 12-13ish?? At least ya Dad didn't name you SUE??!! LOL5
@@troykinnison4575 You can dream it, then build it. Creativity means, not watching brain-killing tv, and other useless time-wasters. Not saying you do, but not doing that, frees up creativity in practical terms. Good luck, and God bless !!
@@troykinnison4575 i used a wheel from a lawnmower, taking off the rubber part with angle grinder. 6 inch plastic, with 1/2 inch hole for shaft. Reamed out hole, and hammered it onto 5/8 1 hp motor shaft. Used roller board wheel, for top tensioner. Works awesome. Very similar to this build here by mr Austria, belt is 2 x 42.
عالی
Sangat kreatif kawan...
Master!
Funny ending bro! 😂😝
Hahahha
Защитный кожух и вытяжка не помешала бы) идея супер!!!
Great work, but if i may say 1 thing. When using your grinder with a cutoff wheel,flip it around so when the disc gets pinched,it will fly away from you. Now it will fly towards you. And believe me it isn't fun xD got a nice deep scar left from it.
yup, enzo. one must be always conscious of this, with any tool. i try to cut/drill/grind/whatever, toward the middle of the garage. no chance of flames, erupting later. a place for the 'breaks' to go....sweep/clean up later. good day, another builder !!
Hola, me podrías decir el diámetro de los tres rodillos y la distancia entre ejes.
Muchas gracias
замена подшипников будет дорогой т.к их аж 8 штук.
the gas strut you using is modified in one end, can you tell me what is the name of the nut that look like eyebolt?
Rod end joint
Excellent, you make it look easy, but it's NOT!
MUY BUENA COMPARE........GRACIAS.SALUDOS FROM REYNOSA
Thanks
What size of gas struts
Why does my belt just fly off no matter what I do
Too much tension on the spring?
Excelente trabajo
Try and get better traction on your two Bearing Pulleys by placing Bicycle Inner Tube sleeves over full width of Pulleys..❗🤔
Muito bom parabéns 👏👏
A very well done project. Just an observation and a question: at the beginning you state that the diameter of the driving wheel is 10.5 inches, but it looks smaller than that. Also, what do you think was the reason for the belt to break? Best regards.
Hello sorry for the wrong info, i think it was centimeter.
My belt are old and didnt kept properly, i think the adhesive that holds them together gave up.
@@SekAustria Thanks for your feedback!
Putting the belt on the wrong way of direction it will always jam on the work piece There is An arrow on back of belt for direction. It's like riding a bicycle off the pavement it will still continue to roll good, but try riding it from the road onto a pavement it won't work. The join on the belt is raised, and so proper direction is needed
It seems like 105 +- diameter to me ❗ Thats the old 4" give or take.⁉️🤔
Too much direct pressure at too high a speed or direct plunging in with a too sharp object can cause belt to jump off or snap
.commonly known by Knife Makers & placing you at risk of " Belt Rash" same as falling off a Bicycle at high speed onto fine stone path..⁉️ (Road Rash) safety precautions are of utmost importance...❗🤔🤦♂️
@@johnwhitty1236 correct..❗ that is also a contributing factor..❗👍🏻
Ang galing mo talaga boss sek
boss bossan kita e
16:55 YOU might want to consider, a safety shroud. There is alot of solid metal, on the backend, therefore, create an angled shroud, with a curved hood over the top, from the back sloping down. Bolt this on. This will protect anyone, anywhere in the shop. I can see it ....in the minds' eye now.....and paint it your fav color, GREEN. my color for some stuff, too, also baby blue. Good day, sir, your a wonderful builder, well thought out, and executed. i may modify a large hinge, for my 2 x 42 build for tracking, using your adjust method. Your not in Austria ?? maybe philipines, or similar. anyway, hi from central alberta canada.
Гениально!!!
Интересно мотор на сколько оборотов?
380v у меня есть
2800
👏👏👏👏👏
I could make it "if I had a welding shop" in my basement or shed. Very nicely done. Thanks
great video
Security level pro 😅
Excellent job bro
Лента 615х100? Бьёт местом склейки?
It's very useful, let's do a good job, see you again
Sir Sek good day, Is this build good for knife making? Thank you and god bless.
I dunno how is the process of knife making. But i think it will work.
@@SekAustria Basically, if it can grind high carbon steels like spring leaf steels then it will do. Do you think I can use bike hubs instead of bearings when building this?
You can also used that but it needs to be precise
@@SekAustria Mr. Skeelo may want to create a hinged table, and have the hinge as close to the belt as possible, maybe same idea as your tensioner. A knurled nut, for adjustment. From 90 degrees to the belt, to slope downward to at least 31 degrees from the belt, for sharpening drill bits. good day, A L L !1
Если есть чертёжи деталей поделитесь пожалуйста.🇷🇺👍
Хорошо бы, но видно что он все по месту делал
@@rentey
Usually best bet is to round up what you have available, including availability of i.e., Belt lay it out on floor or bench & with your scriber/ chaulk & straight edge mark out and juggle what you want where etc., and cut Corrugated Paper Templates to juggle or repeat parts fabrication if necessary⁉️
All juggling, adjusting and matching within the circumference of your belt periphery..❗
Very nice practical compact Machine SEKAUSTRIA..❗👍🏻👏🏻👏🏻🙇♂️
Bernard PhD (Eng.Sci.)
I really liked it and I really wanted one but I can't buy it and I don't even have the tools to do it