Another great video! Very informative and will definitely be a help to me in getting a hand of bambu slice. Congrats on shooting over 1000 subscribers.
damn... half throu the vid and already learned lots of stuff i could have put to good use the last half year of working with bambu studio.. THANKS A LOT!!!
I really like your tutorials. One small request: could you raise your volume levels? I have to turn the volume up a lot to hear you then the ads come in like a tornado siren. Keep up the great work!
Thank you very much for the feed back. I have been cranking the sensitivity on my microphone in my later videos. There could be static at the loudest volumes but it may strike a decent balance for most speakers/headphones.
Great info. Would you do a tutorial on printing with filaments like ASA and PC. It seems no matter what I preset the temps for it always reverts to a lower temperature and faster speed.
I appreciate your previous videos, but this one feels rushed. Also, the text overlays were difficult to read beacuse of lack of contrast and I could ot read the entirety before it disappeared. Or maybe I am too stoned Again, I watch and enjoy your videos . Just some feeback Thanks😊
¿Porque no los dos? The survey was neck and neck for a bit so I had to postpone the "advanced" video for the basics video. 😅 I have a few more "basics" videos to push through,. I will make better effort to make text readable. Thank you for the feed back.
Tnx very much for the video! P.S. Is it just me or your audio level is very low? I'm watching this on M1 MacBook Pro, all volumes are up and its still very quiet.
I think it is machine dependent. I have a "boosted audio" version but it also boosts any static Thank you for the feed back. ruclips.net/video/XbEfm3Xjd1I/видео.html
Cut tool is fine until you have a complex object. I really wish you could scale the cut plane, would be great to slice a body at the shoulders, waist etc and not have it slice through a leg, arm or other sticking out part. As it is, it's only really useful for basic objects. Neat when it works for the application you had in mind though.
Hey hey. Great news. If you have a later version of Bambu studio or Ora slicer selective cuts are available. I made a video about it. Towards the end of this video. ruclips.net/video/RIR5QjhQnmA/видео.htmlsi=txYS8H881AzbAtzO
Love the videos, but PLEASE could you sort out the audio. They're usually quiet, but this is borderline unusable (its really low, and all in the left channel).
I think I'll over shoot audio going forward and leave it to you guys to reduce sound on your end. Thank you for the feedback. I'll upload a boosted sound version for you.
"Fantastic tutorial! 🚀 Clear, concise, and incredibly helpful.
Glad you think so! I hope I am adding enough valuable info without overstating anything or drawing out the length.
Our Bambu-Guru 😉 , thanks for this great Basic-Vid!!! Go on and on….the community will grow up to the sky 👍
Best greatings from the „formnext“ in Ffm.
Thanks a ton. I guess I am falling into being a Bambu centric channel. lol. I'll keep making if everyone keeps watching. How was formnext?
Thank you for covering the slicer, there is always something to learn there.
Thanks for the comment. There is so much to cover I didnt want to overload everyone. lol
Another great video! Very informative and will definitely be a help to me in getting a hand of bambu slice. Congrats on shooting over 1000 subscribers.
Thank you very much. I couldn't do this without every one.
Keep up the great work...love your videos, very informative. Thanks
Thank you. I'll keep making if people like watching.
Will for sure. Iv learned a lot. Thanks
damn... half throu the vid and already learned lots of stuff i could have put to good use the last half year of working with bambu studio.. THANKS A LOT!!!
Thank you for commenting. 😁
Awesome! Thanks for putting together
Thank you for the kind words. There is so much to go over so I'll keep them around a few subjects at a time.
I really like your tutorials. One small request: could you raise your volume levels? I have to turn the volume up a lot to hear you then the ads come in like a tornado siren. Keep up the great work!
Thank you very much for the feed back. I have been cranking the sensitivity on my microphone in my later videos. There could be static at the loudest volumes but it may strike a decent balance for most speakers/headphones.
Great info. Would you do a tutorial on printing with filaments like ASA and PC. It seems no matter what I preset the temps for it always reverts to a lower temperature and faster speed.
Great video!!! Ty!
Thank you very much for the watch and comment. 😁
🤘BITCHIN🤘
Let's GOOOO!
Great video, keep up the good work !
Thank you thank you. 😁
I appreciate your previous videos, but this one feels rushed. Also, the text overlays were difficult to read beacuse of lack of contrast and I could ot read the entirety before it disappeared.
Or maybe I am too stoned
Again, I watch and enjoy your videos .
Just some feeback
Thanks😊
¿Porque no los dos? The survey was neck and neck for a bit so I had to postpone the "advanced" video for the basics video. 😅
I have a few more "basics" videos to push through,. I will make better effort to make text readable.
Thank you for the feed back.
Tnx very much for the video!
P.S. Is it just me or your audio level is very low? I'm watching this on M1 MacBook Pro, all volumes are up and its still very quiet.
I think it is machine dependent. I have a "boosted audio" version but it also boosts any static
Thank you for the feed back.
ruclips.net/video/XbEfm3Xjd1I/видео.html
Cut tool is fine until you have a complex object. I really wish you could scale the cut plane, would be great to slice a body at the shoulders, waist etc and not have it slice through a leg, arm or other sticking out part. As it is, it's only really useful for basic objects. Neat when it works for the application you had in mind though.
Hey hey. Great news. If you have a later version of Bambu studio or Ora slicer selective cuts are available.
I made a video about it. Towards the end of this video.
ruclips.net/video/RIR5QjhQnmA/видео.htmlsi=txYS8H881AzbAtzO
@@ashleys3dprintshop Oh wow. So easy too, can't believe I missed it :D
@@antmax It was added recently from Prusa Slicer. I have been waiting months for it to reach Bambu Studio. 😁
Love the videos, but PLEASE could you sort out the audio. They're usually quiet, but this is borderline unusable (its really low, and all in the left channel).
I think I'll over shoot audio going forward and leave it to you guys to reduce sound on your end. Thank you for the feedback. I'll upload a boosted sound version for you.
Hopefully this helps. Same video with boosted Audio levels.
ruclips.net/video/XbEfm3Xjd1I/видео.html
Can we contact you directly? I will pay you for a specific video.
Sure, my email is ashleys3dprintshop@gmail.com. If it's a topic I already have in the queue, no charge. 😇