Hey Mr. Goode. Great to see you back in the garage, man. Nice shoutout to tangles01... he's a good guy.👍 I've been following him for quite some time as well and can't wait to see both of you guys terrorizing the streets and track in the near future. As you said in this video, one step at a time, Dustin.😉 I think I speak for everyone here, although you had a setback, I'm so glad it wasn't a major one. I hope all is well and you get to see the fruits of your hard labor very soon. Thanks for the upload and have a great evening.✌
Heeeey Mick! Thank you for the nice words! I'm super thankful that the damage was what it was, and not worse. It definitely could have been muuuuuch worse. I hope that it all pays off as well. Thank you man!
@@Goodezilla Tangles, like tangled, but whit an S mate. Thanks for the shout out, I've been internet down for a couple weeks with the moving of house etc. The comments section is never short of a few expert engine builder either lol.
Could've used a drill on the valve tip and just pushed up against the seat for a small amount of time back out and go back, its a sloppy way of doing it but it works and its alot faster process.
Love seeing your videos man. I got my R32 GTR last year and I’m planning a build very similar to yours can i ask you a few questions? I live not too far from you in New Hampshire btw haha
Hello from the UK, Mr Goode! What kind of cleaning and prep did you do to the block and head before reassembly? I’m assuming you didn’t take the head to a shop to skim again as part of this fix (trapped plastic, head off, new valve, back together)? Thanks in advance dude.
@@utsavmamtora7503 Hey! Yeah, I didn't take it back to a shop for this. Since it was a new build with less tham 1k miles on it, there really wasn't much of anything to have to clean. The head gasket surface wiped up easy with some brake cleaner.
@@Goodezilla i mean the width of the line where the valve seats on it. There should be a spec if that line is too thick that means too much material taken off of valve and valve seat
@@AMIN206r15 I'm not sure to be honest. The head work was done at the machine shop to thier specs, but then I bent 1 valve sucking up a piece of plastic, so this video was just replacing the 1 valve and getting it to mate to the existing seat. It would have better to have the valve machined but I didn't want to take it back and wait longer (or spend the money at that point).
@@Goodezilla thanks bro I’m lapping all valves and have troubles with couple of them. The grinding compound caused some lines on the valve seats cause I didn’t move it up now I’m trying to fix it and I’m afraid I’ll take off too much material
LOL...nah man, still have my beard. Was just busy this weekend and wanted to get the video out. Plus I did the intro in the video so didn't need another one with my face :)
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
0:49 that sound effect got me off guard. Nostalgia haha love it! (and also that timing) Good to see you back.
hahaha yeah, that's my phone notification sound!
Hey Mr. Goode. Great to see you back in the garage, man. Nice shoutout to tangles01... he's a good guy.👍 I've been following him for quite some time as well and can't wait to see both of you guys terrorizing the streets and track in the near future. As you said in this video, one step at a time, Dustin.😉 I think I speak for everyone here, although you had a setback, I'm so glad it wasn't a major one. I hope all is well and you get to see the fruits of your hard labor very soon. Thanks for the upload and have a great evening.✌
Heeeey Mick! Thank you for the nice words! I'm super thankful that the damage was what it was, and not worse. It definitely could have been muuuuuch worse. I hope that it all pays off as well. Thank you man!
I hear that Tangles guy is sketchy, I wouldn't trust a thing he says.
@@Goodezilla Tangles, like tangled, but whit an S mate. Thanks for the shout out, I've been internet down for a couple weeks with the moving of house etc. The comments section is never short of a few expert engine builder either lol.
Cant wait to hear the beast , original Og R32 build of youtube
Me either! Thank you for watching!
Sir Goode, can't wait to see you lapping the track Dustin' the competition, lol.
Haha thank you man!
So happy to see you getting some momentum & motivation to get the beast back together! Greetings from Australia :D
Thank you! I'm excited to get it back together and drive it!
Glad to see you back and in a groove! Always use your videos for reference! Great to have you back💪🏾
Thank you buddy! Glad to be back!
Thanks for the vid man! Always wondered what valve lapping was!
Hey Brendan, thank you for watching! Glad you learned something from it :)
Glad to see her getting fixed.
Thank you!
Welcome back 👍🏻 hope the RB26 is ok
Thank you!
Best of luck brother, at least you are making good process now. 👍🏻
Thank you guys!
glad to see progress!!! :)) Keep it up.
Thank you!
My Dream Car Greetings from Germany
Hi from USA :) Thank you for watching!
Could've used a drill on the valve tip and just pushed up against the seat for a small amount of time back out and go back, its a sloppy way of doing it but it works and its alot faster process.
That's an interesting idea. I just went with the tried and true method haha
Very cool!
Thank you!
Love seeing your videos man. I got my R32 GTR last year and I’m planning a build very similar to yours can i ask you a few questions? I live not too far from you in New Hampshire btw haha
Hey, thank you man. Yeah you can ask me questions. It would be easier to respond on my facebook page though. facebook.com/goodezilla
Hello from the UK, Mr Goode! What kind of cleaning and prep did you do to the block and head before reassembly? I’m assuming you didn’t take the head to a shop to skim again as part of this fix (trapped plastic, head off, new valve, back together)? Thanks in advance dude.
@@utsavmamtora7503 Hey! Yeah, I didn't take it back to a shop for this. Since it was a new build with less tham 1k miles on it, there really wasn't much of anything to have to clean. The head gasket surface wiped up easy with some brake cleaner.
back to the future chime @ 0:52 ?
Haha yup! My phone got a notification lol
Thanks man for your helpful video do you know the spec for the valve seat?
What spec are you referring to?
@@Goodezilla i mean the width of the line where the valve seats on it. There should be a spec if that line is too thick that means too much material taken off of valve and valve seat
@@AMIN206r15 I'm not sure to be honest. The head work was done at the machine shop to thier specs, but then I bent 1 valve sucking up a piece of plastic, so this video was just replacing the 1 valve and getting it to mate to the existing seat. It would have better to have the valve machined but I didn't want to take it back and wait longer (or spend the money at that point).
@@AMIN206r15 if it didn't seal properly or hold compression, I would have taken it back to the machine shop to get fixed.
@@Goodezilla thanks bro I’m lapping all valves and have troubles with couple of them. The grinding compound caused some lines on the valve seats cause I didn’t move it up now I’m trying to fix it and I’m afraid I’ll take off too much material
I think I might just tear down my R32 too, I want new cams, valve covers, and timing belt.
You don't have to tear it down for new cams and valve covers. Just have to reshim if you get new cams.
lapping is Zen sone stuff
say what? lol
Atleast only 1 valve to replace and lap and shim 😂😂 fun process.
Yeah, nice and time consuming! lol
@@Goodezilla but a good learning process also! Might be able to see how much of a smaller shim you'll need based off of the valve top difference.
WOOT I'm famous
If only I was famous! LOL
@@Goodezilla It's all relative mate, way more famous than me.
Ive been waiting too long
Thank you for watching!
GoodeZilla
No problem. Have a great day
I guess I'm 3rd
:) Thank you for watching!
A little saliva goes along way... pause. But for real, easiest way to keep plunger on.
haha yeah...well hopefully I'm done with this for a long time! :)
The real question is, why didn't you show your face?! Did you shave off the viking like man beard? ✌😂
LOL...nah man, still have my beard. Was just busy this weekend and wanted to get the video out. Plus I did the intro in the video so didn't need another one with my face :)