How to Pair AP and Client for TP-Link CPE510! Easy Point-to-Point & Point-to-Multipoint Radio Setup!
HTML-код
- Опубликовано: 4 июл 2024
- Looking for a reliable wireless bridge to connect your security cameras? TP-Link radios have you covered! These radios are extremely easy to pair and in this video, I show you how to do it! I walk you through the process of pairing the Access Point and Clients for both point-to-point & point-to-multipoint wireless connections. We set up the Pharos CPE510, but the process we go over can be used to pair the CPE210, the CPE710 & also the EAP225-Outdoor.
Read the blog post we made about setting up and linking these TP-Link radios!
Blog Post: nellyssecurity.com/blogs/arti...
***********************************
📋 Video Outline
00:00 - Introduction
00:39 - What you need to know
01:23 - Unboxing & Preparing AP and Client
02:02 - How to set up the AP
03:27 - How to set up the Client(s)
04:35 - Conclusion
***********************************
🔗 Product Links
CPE510: bit.ly/3XFw1OR
CPE210: bit.ly/3Z6rztC
CPE710: bit.ly/3Eqb0kf
***********************************
How'd we do? We'd love to hear your feedback! forms.gle/ovzRcetT89bXUxxh9
Sign up for our newsletter! www.nellyssecurity.com/subscribe
🌐 www.nellyssecurity.com
📧 customerservice@nellyssecurity.com
📞 855.340.9999
⬇️ Follow Us on Social Media ⬇️
Facebook: / nellyssecurity
LinkedIn: / nellyssecurity
Instagram: / nellys_security
Twitter: / nellyssecurity 
Наука
These radios survive Canada's remote North, I've installed two of these AP's for a client and they are super happy and still operating for 15 months, and winter months at -50 Celsius. Great video.
This is by far the best video on setting these up. Thank you
Great video. Clear and all what is needed. And done on a Mac so I know what to see. Thanks
Thanks for your video, what would be better to have one as Accec Point - Range extender, or using two CEP210's, 1x AP and 1x client. Distance aptox 100 mtr. Need to connect 2 Solar inverters on the internet, they have both wifi dongle.
Hi, Thank you so much for your precious video! .
Is it possible to use a single antenna, to get a better wifi signal in a IP citophone with a distance of 80m from the home wifi router? And... is it really directional, or it creates a spherical wifi field in the round of the antenna?
After you’ve set this up, if you want to reconfigure is the default IP 192.168.0.254 the same or has it changed to the new ip you’ve set? Also, when you change the ip address of the ap, in order to configure do you set your device (computer or router’s) ip to the initial setting such as 192.168.0.x? Or would it now be 192.168.2.200 for example. Loved your video! Thank you
Nice video
Hi, nice video, I connected 2 ones, but now I'm looking to how connect a deco s7 to the client one, and I can't find the solution, cn you help me?
If you are hooking a PoE Switch that will feed PoE cameras after the client antena, should I choose and IP on the same family as the internet router of the place?, or it doesn’t matter since the antenas will not handle DHCP?
can I use the AP inside a window? Looking to get signal to a client about 1/2 mile away.... from a condo unit on 11th floor to a fishing hut 1/2 mile away (clear line of sight)? Thanks!!
So good
Im trying to connect 2 clients for surveillance on 2 apartment building. The clients work 1 at a time. But cant get cameras to connect from both at same time.
So how I connect my AP Tp-link to my current network I want to extend? Is that bossible via Wi-Fi or is it mandatory to use Ethernet cable from Wi-Fi router to AP?
I want a device that can pick wifi signal from over 1 to 2 kilometres so i can connect to free wifi of malls or hotels , so which would you suggest??
If main router have a ip 192.168.22.1
All other devices inclouding new ap and client (this anntenas cpe 510), cameras, dvr and poe switch also must be changed to 192.168.22.x ?
what the best to use 220 or 510?
in client cpe first light not lighting, but both AP and client connected but internet not transmitted, what to do
Brother I am from India..I love your video.
I have order one Cpe 210 can i access wifi from my home internet to 200 meter long...or above.
Brother make a video with single Cpe 210 to Access wifi.. thank you
whats the diff with client and repeater?
I can't seem to save the new IP settings, and I can't figure out what I'm doing wrong.
I find it strange that no one talks about P2MP connection and how wide (horizantal angle) be appart within the clients, so if the CPE510 AP connects to 2 clients could the AP connect to 2 clients within 90 degrees, or 120 degree, or even 180 degree. what horizantal angle can the CPE support to connect to other clients
The beam width is 45 degrees wide and 30 degrees up and down for the CPE510.
can i connect with 1 no need 2
Why access point side net conection disconecting every 10 minut, after i want to remove cable and need to reconnect the cable then its work 10 min again anybody know??
Would this product work for 10 kilometers distance?
it is supposed to work 15 km max.
Can i use eap110 as ap and this one for client?
For the CPE510 ,I don't think so. But to be sure you would need to reach out to TP-Link!
@@NellysSecurity thank you
So this is weird... I cannot connect to the wireless bride wifi. However, if I plug the ethernet cable in from the client to my laptop, it works. Any ideas?
We'd have to see how it's set up! If you purchased it from us, give us a call and we can help you out. 855-340-9999
Hi,. I assume you need to add wireless router and connect it to the other POE port (were your laptop used to connect)
can connect cpe510 sender and recover 605?
Hmm can you elaborate on what you mean by 605?
Please why only my laptops see the wireless network after configuration and my Android not seen it
We'd have to know more information about your setup to see what's going on. Our initial thought is perhaps you have it hardwired into your laptop. If that's not the case, feel free to give us a call at 855-340-9999.
2.4 ghz mobile not support only 5ghz..youtuber need business not help
how long can transmit that model?
With no obstructions, it can go up to about 10 miles give or take. Of course, it all depends on whether or not it has a clear line of site.
@@NellysSecurity would the speed drop at longer distances? can't find an answer
Can I do this on a MacBook? I don’t have an Ethernet port.
Yes, you can run the wire directly into your router and still get to it from your Mac. Just make sure to do them one at a time or you'll run into an IP conflict.
@@NellysSecurity thanks, I bought a ethernet USB-C adapter and followed your video. You made it too easy. thank you.
Glad it worked out for you! Let us know if you have any other questions.
Why is it necessary to change the ip of the pc?
Thanks for your question! We advise you to change the IP address to "192.168.0.x" on your PC because it will make connecting to the AP & Client easier. ".0." is a broader network that will be able to grab more with its range. It just makes locating & locking onto your radios quicker and easier.
Bro i installed these pair successfully but no internet so help bro
Bro! If you got them from us, we'll help see what's goin on and how we can fix it. Give us a call, 855-340-9999.
maximum range of these radios...ptmp ...
I am setting up a PtP to my warehouse 600ft away. My warehouse is over 5,000 square feet. Once I get the wifi to the warehouse, how can I extend eh wifi to the entire warehouse? Another client somehow? Extender? OR??? Thank you! I know NOTHING about this sort of thing....
Connect a mesh system to the TP-link :-)
I already own a TP Link router AC1750 that I'm not currently using. Can I attach that to the P2P in the warehouse? (I just bought the TP Link P2P CPE510) Then if that doesn't give me enough area of wifi, get a mesh system and attach that to the router?@@404Steff
Pay someone for a day plz
@@404Steff Thank you I had the same question.
I’m connecting this cpe in to lan and my whole internet is getting down. What would be the reason.