Hola, normalmente cuando un amplificador se enciende con una luz de proteccion es porque hay un problema con la seccion de salida o es un problema de voltage (debe tener al menos 11.8V en el terminal). Para la seccion de salida, normalmente es un mosfet de salida defectuoso o la carga (altavoz o subwoofer) es demasiado baja en ohmios ( por debajo de 1 ohmio). Espero que ayude, gracias. Yo usé el traductor de Google
estoy pensando en adquirir un amplificador de esta linea solo que es para medios, es el qpx2800.4 , la verdad no se adquirirlo despues de ver este video, ya que se ve que los watts que menciona en sus especificaciones este amplificador, estan muy lejos de lo real, nada que ver con lo que en realidad es, me imagino que la linea es asi toda
@@kevind_53 trying to understand this amplifiers max rms watts??I have same amp but the 4000 watt and am super curious of how much power it actually makes
@@tehpimpmasta Hi, thanks for the question. Well Quantum rate the amplifier to 3000W wich is probably a peak number. if you are looking to 1%thd ''CEA'' rating the amp outputed 213W RMS @ 4 ohms, 347W RMS @ 2 ohms and finally 408W RMS @ 1 ohm. If you want the Power at the clipping point on the SMD AMM-1, the amplifier outputed 223W RMS @ 4 ohms, 361W RMS @ 2 ohms and 553W RMS @ 1 ohm, but the sine wave was not looking very good(at 1 ohm). For a 1 ohm application I suggest to be conservative on the clipping point. Hope it helps!
@@StraightothePointNews Hi thanks for the question, I puted the results in the comment just above. In general company will pull put Max/Peak Power on the box for the wow factor, but you will never get those results. You need to check for RMS ratings. In my dynos the numbers you see are RMS at 1% thd (Distortion light on SMD DD-1) and at the clipping point(On the SMD AMM-1) Hope it help Thanks!
Disculpa lo compre despues de un mes al ora de prenderlo prende en protección q podra ser. No trae fusible es dijital
Hola, normalmente cuando un amplificador se enciende con una luz de proteccion es porque hay un problema con la seccion de salida o es un problema de voltage (debe tener al menos 11.8V en el terminal). Para la seccion de salida, normalmente es un mosfet de salida defectuoso o la carga (altavoz o subwoofer) es demasiado baja en ohmios ( por debajo de 1 ohmio). Espero que ayude, gracias. Yo usé el traductor de Google
Estable a 4 ohms.?
Cúatos whats rms entrega reales.?
Ci estable a 4 ohms
213rms @ 1% thd, 223 rms @ clipping 4 ohms
estoy pensando en adquirir un amplificador de esta linea solo que es para medios, es el qpx2800.4 , la verdad no se adquirirlo despues de ver este video, ya que se ve que los watts que menciona en sus especificaciones este amplificador, estan muy lejos de lo real, nada que ver con lo que en realidad es, me imagino que la linea es asi toda
Cuantos Watts RMS da este amplificador a 1 ohms
408RMS @ 1ohm 1%THD 14.4V
553RMS @ 1ohm Clipping 14.4V
@@kevind_53 comparado con este modelo de Amplificador Sony Xplod Xm-gtr3301d Clase D 1100w. Cuál de los 2 cuál es más potente?
Disculpe si llena un rock series de 3000 wuats
lo siento, intento usar el traductor de google pero no puedo entender lo que dijiste ...
It works for a rockseries subwoofer 1400rms? Thanks
Do you have the modele number of the subwoofer?
Better with this model, MTX THL10-44. I have 2 of those subwoofer, it works great whit this amplifier?
Yes the amp is 1 ohm stable so both coil in parallel to get a 2 ohms load per subs, and connect each sub in parallel to you will be at 1 ohm final
Can someone translate lol
Hi, wich part you need clarifications?
Probably all of it lol. But mainly.. Will this thing push 3000 watts or no? All I saw was like 530 max.
@@kevind_53 trying to understand this amplifiers max rms watts??I have same amp but the 4000 watt and am super curious of how much power it actually makes
@@tehpimpmasta Hi, thanks for the question. Well Quantum rate the amplifier to 3000W wich is probably a peak number. if you are looking to 1%thd ''CEA'' rating the amp outputed 213W RMS @ 4 ohms, 347W RMS @ 2 ohms and finally 408W RMS @ 1 ohm. If you want the Power at the clipping point on the SMD AMM-1, the amplifier outputed 223W RMS @ 4 ohms, 361W RMS @ 2 ohms and 553W RMS @ 1 ohm, but the sine wave was not looking very good(at 1 ohm). For a 1 ohm application I suggest to be conservative on the clipping point.
Hope it helps!
@@StraightothePointNews Hi thanks for the question, I puted the results in the comment just above. In general company will pull put Max/Peak Power on the box for the wow factor, but you will never get those results. You need to check for RMS ratings. In my dynos the numbers you see are RMS at 1% thd (Distortion light on SMD DD-1) and at the clipping point(On the SMD AMM-1)
Hope it help Thanks!