ROHÉ-California C25 Waschanlage Car wash

Поделиться
HTML-код
  • Опубликовано: 2 дек 2024

Комментарии • 19

  • @hyvahyva
    @hyvahyva 14 лет назад +2

    @votail1 It's done via mechanical limit switches. The top brush is mounted on a pendulum-like frame hanging from the horizontal bar moved up and down by the motors. The wheels attached to the dryer are feelers with limit switches that tell the machine if it's too high, too low, or just right. The dryer is frozen in its fully raised position for unknown reasons on this one.

    • @douro20
      @douro20 5 лет назад +2

      At least this isn't an entirely dumb machine. It does have programmable logic which was an improvement over the C20.

    • @kingcarwashnfansdrivesetc8364
      @kingcarwashnfansdrivesetc8364 3 года назад

      LOL the hoses when the blowers startup, but were the flexible hoses exactly the same like the later models C28 or C35

  • @carwashconnoisseur7216
    @carwashconnoisseur7216 9 часов назад

    There's a California Rohe C25 at the Auto Myjnia car wash centre in Kowalin in Poland

    • @HammerRudi
      @HammerRudi  7 часов назад

      Wow... i Thank you sou much :)"

  • @MikeInc79
    @MikeInc79 14 лет назад +1

    Absolutley more than 30 years old!

  • @AllenJeremy
    @AllenJeremy 15 лет назад +1

    Unique car wash but what is unusual is that the top brush is red & blue and the side brushes are blue & white

  • @baconboytravelproductions5377
    @baconboytravelproductions5377 2 года назад

    The first drying of the car ends at 4:50. All of a sudden, at 4:51, the top brush begins to descend while not spinning. Next, at 4:56, the side brush on the right starts moving, but again, not spinning. Afterwards, at 5:00, the side brush on the left starts moving as well, which is also not spinning. Somebody please explain why only one brush at a time on the machine moved instead of all three moving at once because I would really love to know what exactly was wrong with the way those brushes were operating on the machine.

    • @HammerRudi
      @HammerRudi  Год назад

      So in this case something went wrong with the program selection. This is not a regular washing routine.
      The other video of this system shows regular operation.
      The delayed movement of the side brushes is due to the age and maintenance condition. Sometimes the side brushes get caught or the carriages get jammed due to poor maintenance or greasing and possibly deposits.
      Otherwise I only know that the roof brush starts when it reaches the bottom of the front and the side brushes start when the system starts and moves on

  • @Maxiwash
    @Maxiwash 13 лет назад

    cool rudi machst voll gute videos

  • @Haffschlappe
    @Haffschlappe 13 лет назад +1

    Hmm in Düsseldorf war bis in die 90er an der Nuttentankstelle,
    (Shell Station mit angrenzendem Bordell) eine solche C25, die Station ist zu aber ich glaube die Waschanlage ist immernoch in der Halle, da müsste mal jemand nachgucken..die war noch gut im Zustand...Düsseldorf, wenn man auf die Autobahn fährt vom Arag Hochhaus richtung Oberhausen / Essen, rechte Seite kommt irgendwann eine aufgegebene 70s Shell Station mit kleiner Waschhalle darin ist die C25 bis zuletzt gestanden..

  • @SLKDriver1985
    @SLKDriver1985 13 лет назад +1

    Soviel Mühe geben sich die heutigen Waschanlagen nicht mehr^^

  • @votail1
    @votail1 14 лет назад

    @hyvahyva Does this apply too the side brushes?

  • @volkerbierkamp4236
    @volkerbierkamp4236 3 года назад

    Warum geht die dachbürste erst wenn die trocknung beginnt runter

  • @votail1
    @votail1 14 лет назад

    How do machines that old not crash into the car, it must be long before they where built with sensors

  • @leutnantspritzi9752
    @leutnantspritzi9752 5 месяцев назад

    2024 😅

  • @joseantonioruizgallardo9204
    @joseantonioruizgallardo9204 5 лет назад +1

    Old car wash