For anyone having trouble making it click in: make sure the back metal piece of the stand is underneath the side bars at the back of the sliding panels. I think that's why he was saying to put pressure at the back. So before you slide it, the front two metal teeth things should be aligned with the two holes next to the "open" thing. But the back metal piece (which is perpendicular to the two metal teeth) should have its ends underneath the side things at the bottom of the sliding panel.
Thank you so much for this video. An amazon review said they watched a youtube video to figure out the trick to getting this stand to snap in. It took me several tries and I was losing my patience but when I quit trying so hard and used gentle pressure towards the bottom like you said, in it went and snapped.
I'm moving and I needed to get this apart. Thank you. FYI. There are two screws under that looped shaped handle on the back of the verictal. You don't need to remove those. In fact I think it's bes to leave them in place.
They're not explaining it correctly. Turn the monitor upside down and insert it at a slight downward angle instead of ‘straight’ into the holes. It should slide right in. You're welcome.
I don't remember but if it does you will find it at the menu settings of our full review here: ruclips.net/video/TlyelqfIk4k/видео.htmlsi=ZPGFA9MgyUketHBC&t=230 It is time stamped and will take you to the correct spot to watch!
I had the same problem! Make sure the back metal piece is also underneath the black gaps/parts at the "back" of the sliding panel (I'm calling the "front" part the bit where the front two metal pieces click into). So before you start sliding the stand in, make sure the front two "teeth" things are aligned with their respective holes, but also make sure that the back metal piece is underneath the side gaps at the "back" of the sliding panel. I think that's what he meant by "pressure at the back", but I don't think he realised what he was doing hahaha. I hope that makes sense, haha this is hard for me to describe
For anyone having trouble making it click in: make sure the back metal piece of the stand is underneath the side bars at the back of the sliding panels. I think that's why he was saying to put pressure at the back. So before you slide it, the front two metal teeth things should be aligned with the two holes next to the "open" thing. But the back metal piece (which is perpendicular to the two metal teeth) should have its ends underneath the side things at the bottom of the sliding panel.
Thanks so much for helping others here :)
still doesn’t slide in
You have saved me so much frustration lol
@@leadtheway4608 Glad to have helped haha
You're a godsend. Thanks for this. Who designed this piece of crap?
Thank you so much for this video. An amazon review said they watched a youtube video to figure out the trick to getting this stand to snap in. It took me several tries and I was losing my patience but when I quit trying so hard and used gentle pressure towards the bottom like you said, in it went and snapped.
The stand is goofy. I am glad you figured it out. I wish I could make a better video on it but not sure how. Just gotta do it for yourself ha!
VERY HELPFUL, onece you get the hang of it it really did help. i was sweating so much from this
Yeah exactly!
1:33 how do you even do this? It’s not working for me
I know it is hard to explain... bottom back pressure then slide in forward and it will click in place!
Mine wont slide in@@tvchef
I’m struggling 😅
Hang in there!
I'm moving and I needed to get this apart. Thank you. FYI. There are two screws under that looped shaped handle on the back of the verictal. You don't need to remove those. In fact I think it's bes to leave them in place.
Glad it helped! And yes leave those in!! Good luck with your move!
How the hell you do this?!?! 1:10
ha it is all about the finesse!
I need to know how to link it to my computer
HDMI or VGA Cable!
They're not explaining it correctly. Turn the monitor upside down and insert it at a slight downward angle instead of ‘straight’ into the holes. It should slide right in. You're welcome.
Glad you figured it out!
IVE BEEN TRYING THIS FOR THE LAST 30 DAMN MINUTES AND IT WONT GO INNNN
So sorry! Hope you figured it out!
@@tvchef pulled both of my shoulders and they were sore for the next few days but i got it in!!!
For some reason, the stand doesn't really work. I put it in, but the monitor isn't stable at all.
Hmmm make sure you have it nice and snug?
How to turn it on?
Connect your source device (pc, console etc) then press the power button on the monitor!
After 30 minutes of fighting I finally got it to click somehow 😩🎉
This monitor have crosshair for gaming?
I don't remember but if it does you will find it at the menu settings of our full review here: ruclips.net/video/TlyelqfIk4k/видео.htmlsi=ZPGFA9MgyUketHBC&t=230
It is time stamped and will take you to the correct spot to watch!
You need to kinda wiggle is a bit, and like roll it.
Wiggle and roll and stick it to click it lol
How do you face the monitor upwards like if my chair is too high
You would need a different stand to probably make the adjustment you need!
You need to just slide it in 90° to the back , put it on the bad flat , and insert it in 90°
Great!
For me it just doesnt do SNAP RIGHT IN.
I had the same problem! Make sure the back metal piece is also underneath the black gaps/parts at the "back" of the sliding panel (I'm calling the "front" part the bit where the front two metal pieces click into). So before you start sliding the stand in, make sure the front two "teeth" things are aligned with their respective holes, but also make sure that the back metal piece is underneath the side gaps at the "back" of the sliding panel. I think that's what he meant by "pressure at the back", but I don't think he realised what he was doing hahaha. I hope that makes sense, haha this is hard for me to describe
Thanks for clarifying... so hard to describe and show this!
Hopefully you got it in!
This screen is going to f****** shatter before this thing ever pops in 😡
@@kevgotti5385I know right lol
Doesn’t work at all
Sorry you had that experience! -MB
Terrible. Doesn’t work at all. Had to return it
Sorry to hear that!
It doesnt work at all
Sorry to hear that!