Upgraded from an older 18v kit. ruclips.net/user/postUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.
Depending on what you're doing the impact is good / bad I have it as a cabinet maker and instead I use a 12v impact all the time because this is way too quick / powerful for most delicate things , it'll undo wheel bolts on my car nice and easy (about 115nm) but trying to delicately make a cabinet it's awful , I'd go with a cheap DeWalt if you want good 18v that'll take the abuse and 12v Bosch
Ciao, volevo sapere se il battente è fisso o si può eliminare....quando avvito viti grosse preferisco senza, anche perché ci foro avanti o altrimenti anche un po' di grasso...
Impact drivers use a quick-release connection for their bits. If your bits don’t have that (the small ones), use a magnetic bit holder with a quick-release connection. They’re only a few bucks. If you’re planning on doing heavy duty work, it’s worth it to get special impact driver bits, as impact drivers are way stronger than drill/screwdrivers and can destroy “normal” bits.
@@LKN4WAR "This is impact hex driver." , Wrong!!! You will use the 1/2 square for car, this is why this tool have it, not adaptor from hex. And yes maybe is at limit with the power for cars, you still can use it if was tightened correctly.
Hola muy bueno tú vídeo, crees que es el destornillador de impacto del momento, a Chile todavía no llega solo ha llegado el gdxli que opino que es inferior y no es heavy duty... Espero que llegue pronto, lo podrías comparar con otro modelo de otra marca?? Saludos cordiales...
Hola buenas Noches soy Miguel de Bunos Aires Argentina....Muy Buen vídeo😮😮 Creo que es lo Que me Hace Falta pero.... Tengo Auto.. esta Herramienta saca las Tuercas de las Ruedas ? Que es .. también muy importante para mi... ya que Trabajo en la calle .. y cada tanto tengo Q cambiar el neumático 🛞 Por pinchar .. Si sirve para eso... Me vendria de Diez ...😂😂😂 Por si me podrías contestra estaría mas Q agradecido 🎉🎉🎉 Hasta pronto 😊😊😊
@@woodworkingbarcelonaii9413 Vimos la misma oferta amigo😂👍👍Ya le he dado caña y es una pasada, 2x1 llave de impacto y atornillador, con esas 3 velocidades podemos poner todo tipo de tornillos, incluso tirafondos mas pequeños que los primeros que pones.
Upgraded from an older 18v kit. ruclips.net/user/postUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.
Now thats how you do a review! No bullshit. 👍🏼
Impressive. I love these impact drivers. I bought into the Makita ecosystem but Bosch makes quality gear, too. Very happy with my multitool from them.
Una demostración real. Eso si que importa
Great tool and great demonstration! Thanks!
Thanks Mimi! 😉
no messing around there, you gave it some stick, thanks for showing what I need to know before buying
Excelente presentación del video y las leyendas, saludos
Muchas gracias!
Is it still powerful with non pro core batteries?
Por gentileza, qdo chega a GDX 220?
I have a Dewalt dcf887 impact driver. This looks very good compared to
I just want to ask if your bosch hex impact adapter also wobbles like mine...
Same
Great tool great presentation! Thank you!
Hi nice review can we use deep socket with this
That's a cool video; action only and no yap-yapping. But I wish you could have briefly explained the variations in speed that you demonstrated.
Depending on what you're doing the impact is good / bad I have it as a cabinet maker and instead I use a 12v impact all the time because this is way too quick / powerful for most delicate things , it'll undo wheel bolts on my car nice and easy (about 115nm) but trying to delicately make a cabinet it's awful , I'd go with a cheap DeWalt if you want good 18v that'll take the abuse and 12v Bosch
what differences does it have with the gdx 1800???
Ciao, volevo sapere se il battente è fisso o si può eliminare....quando avvito viti grosse preferisco senza, anche perché ci foro avanti o altrimenti anche un po' di grasso...
Hi complete noob here. How do you use normal driving bits with this ?
Impact drivers use a quick-release connection for their bits. If your bits don’t have that (the small ones), use a magnetic bit holder with a quick-release connection. They’re only a few bucks. If you’re planning on doing heavy duty work, it’s worth it to get special impact driver bits, as impact drivers are way stronger than drill/screwdrivers and can destroy “normal” bits.
can we also use this for buffing or polisher
I don't think so.
I use mine to make my lunch.
can someone test CP CP8548 vs Bosch or any other professional brand ?
Super 👍
can we use 18V battery for that?
Yes, the model is 18v so you should use 18v battery
can this be used for wheel of the car
You need impact wrench. Not this. This is impact hex driver. Most car lug nuts are too tight for hex drivers.
Yes you can if you have a small car
Of course an impact wrench will deliver more torq (Nm) but in my experience you can mount/unmount small car wheels with this range of product.
It has got 200Nm torque, you can use it whit screews, bolts and nuts.
@@LKN4WAR "This is impact hex driver." , Wrong!!! You will use the 1/2 square for car, this is why this tool have it, not adaptor from hex. And yes maybe is at limit with the power for cars, you still can use it if was tightened correctly.
Dimana untuk yang sama ada pengaturan nya
Buen video mi hermano, Excelente, que modelo es me gustaría que me lo hiciera saber gracias bro....!
En el video lee abajo hay lo dice ..
Hola muy bueno tú vídeo, crees que es el destornillador de impacto del momento, a Chile todavía no llega solo ha llegado el gdxli que opino que es inferior y no es heavy duty... Espero que llegue pronto, lo podrías comparar con otro modelo de otra marca??
Saludos cordiales...
Viejito lo compre en Dinamarca y es muy bueno! Aguanta el agua lo que es ideal para trabajar en el sur de chile donde trabajamos! Saludos!
Can this be use fo cement?
I know it’s 3 years old, but for others: no, it shouldn’t be used for cement mixing.
Drills that can go really low RPM, maybe, but not impact drivers
Link pemesanan nya om
Very good,excelente.ok
Price please
Hola buenas Noches soy Miguel de Bunos Aires Argentina....Muy Buen vídeo😮😮
Creo que es lo Que me Hace Falta
pero....
Tengo Auto.. esta Herramienta saca las Tuercas de las Ruedas ?
Que es .. también muy importante para mi... ya que
Trabajo en la calle .. y cada tanto tengo Q cambiar el neumático 🛞
Por pinchar ..
Si sirve para eso...
Me vendria de Diez ...😂😂😂
Por si me podrías contestra estaría mas Q agradecido 🎉🎉🎉
Hasta pronto 😊😊😊
Хороший аппарат
Untuk link nya pembelian nya om
Ucu takıyorum düşüyor tutmuyor nasıl ysparız
Can this be use for metal as well?
Yes if you have the right bit
What does that wireless part do? Can any 1 explain
En que tiendas se puede conseguir en USA o en México?
gdx 210c is newest model.
Oui c'est vrai
Cuanto cuesta?
Me costó 137€ de oferta, con L-BOXX sin la batería. Un saludo!
@@woodworkingbarcelonaii9413 Vimos la misma oferta amigo😂👍👍Ya le he dado caña y es una pasada, 2x1 llave de impacto y atornillador, con esas 3 velocidades podemos poner todo tipo de tornillos, incluso tirafondos mas pequeños que los primeros que pones.
@@enriquezueco5462 Exacto! Un placer trabajar con esta herramienta.
YES EASY PEACY
Vale come me l'avvitatore a impulsi....preferisco quello normale....
Really bad, i bought more than a month but 4-5times go to warranty services!... look for changing to other brand when i am big fan of Bosch!..
Contact no
Two whelar bike youse
con un trapano normale ne avresti piantate 10 viti in tanto che ne pianti una con quello....