Thanks a lot dude.. It worked for me with the mode + up key... if I would call the repair guy, he would have definitely asked to change the PCB and charged around Rs. 10000 (150 USD) plus taxes and labour charge... You helped me out... Appreciated....
Thank you very much :) It worked for me. It did not go till 280 though. It went till 232 (from 0) and didn't go beyond that. Then when I tried to start it didn't. Then again I bought it to 16(from 232 and this time it did not decrease below 16) and then again tried to run it . And yaay it worked.
Thanks a lot your suggestion helped me to solve a problem with a FASSI F40 . The treadmill was showing E7 plus a blinking 60 70 in an other part of the screen. The key combination Stop + elevation up fixed the error ! The treadmill recovered the refeerence position.
Thank you! Thank you! Totally saved my treadmill! Except I didn't get it down all the way and I can't get the screen to come back up to put it down the rest of the way? I have a lifespan tr800
ELECTRONIC RESETING: =================== Power on the treadmill, Press S Button, The treadmill starts after 3 Seconds, as usual. But, after 5-7 Seconds, the Treadmill stops with Error E7, if this is the case, then proceed as follows: In this position (that is after the Error E7 is displayed), First Press "Stop" Button & then "-" (Minus) Button, for 3 Seconds. The treadmill will reset & Error E7 disappears. Then, as usual, press the Start button, The treadmill starts after 3 seconds & runs, after 7 seconds also Hope this is useful. Thanks
Hi! I have U style treadmill. After starting, it runs for 1 min then stop & display error E08. what to do to reset the computer or fix the problem? thanks SVAR
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Thanks a lot dude.. It worked for me with the mode + up key... if I would call the repair guy, he would have definitely asked to change the PCB and charged around Rs. 10000 (150 USD) plus taxes and labour charge... You helped me out... Appreciated....
Thank you very much :) It worked for me.
It did not go till 280 though.
It went till 232 (from 0) and didn't go beyond that. Then when I tried to start it didn't. Then again I bought it to 16(from 232 and this time it did not decrease below 16) and then again tried to run it . And yaay it worked.
Thanks a lot your suggestion helped me to solve a problem with a FASSI F40 . The treadmill was showing E7 plus a blinking 60 70 in an other part of the screen. The key combination Stop + elevation up fixed the error ! The treadmill recovered the refeerence position.
Very very very useful... thankyou very much.... 🌼🌻🌻🌼🌻🌻🌼🌻🌻🌼
I can't describe how I appreciate this. I was to call service and now it just works fine. Really much money saved...
What a great bloke - worked a dream and saved me a fortune.
Thanks a million 😁 It worked so instantly 😄 And I never expected that... I was about to call the repairman! Thanks again!
ShotFlicKO //SFKO
Just fixed the ancient treadmill that I bought secondhand. Thank you so much!
hello... ben.
tried all that you say,,, but still has the E7 code. do I need a new board ?
how do I disconnect the elevation motor?
cheers
Brilliant, worked instantly on our Insight treadmill, thanks a million.
Just fixed it using the instructions, Thanks a lot!!
Awesome
Thanks alot for saving time and money
😊😊😊😊
thank you it was amazing. i was about to call somebody to fix that
Thank you! Thank you! Totally saved my treadmill! Except I didn't get it down all the way and I can't get the screen to come back up to put it down the rest of the way? I have a lifespan tr800
thank you man. it worked for me like a charm. you saved me.👌👌👍👍🙏🙏
Thanks! No circuit board required, it reset for me.
My treadmill model is gf01b and I have problem with error 07 ! Can I follow the same steps?
hi we have the same model but no number comes up just E7what does that mean please? also any idea were to get user manual from? thankyou so much
Have you fixed this yet?
Thanks I fixed it my friend ❤❤❤
I have the same problem but deferent treadmill can u help
ELECTRONIC RESETING:
===================
Power on the treadmill,
Press S Button,
The treadmill starts after 3 Seconds, as usual.
But, after 5-7 Seconds, the Treadmill stops with Error E7,
if this is the case, then proceed as follows:
In this position (that is after the Error E7 is displayed), First Press "Stop" Button & then "-" (Minus) Button, for 3 Seconds.
The treadmill will reset & Error E7 disappears.
Then, as usual, press the Start button,
The treadmill starts after 3 seconds & runs, after 7 seconds also
Hope this is useful.
Thanks
Hi! I have U style treadmill. After starting, it runs for 1 min then stop & display error E08. what to do to reset the computer or fix the problem? thanks
SVAR
What is er5?
Thank you i love you so much
Thaks alot it worked❤️
awesome it worked!
Please send me the make OF this machine thx
Fatima Safdar no
Pls send me the number of this ics
how to fix error e02 my treadmill show this error
How to fix error er04
how to solve E8 error
You just need to replace the incline not the circuit board
wat ist e1 pro fitnes firma
E6 explain..
E07 error
Erreur hp svp