Omg! Amazing! You must be the most patient person to do this! 😄 I found your channel as I wanted to know how wigs are made. I got some full lace remy HH blonde wigs to custom dye for myself. Wow so this is how all the strands are put on!!
+Fiona Fay Hey, thi sis how it should be done in order for it to look good, most asian wigs are kinda badly and bulky made to save time and thus price.
Great job as always! I have never tried a flat iron, I'm much too lazy! But it seems to do a really great job of sealing the knots. Thanks for the video!
I only do single knots for babyhairs now because my clients don't glue their units down they sew them in so I give them double knots with single strands, but that's an interesting method, I might have to try that on a unit for myself.
Hey hey Lily, thanks for passing by and leaving a comment. You are right about the knots. Double knots are secure, once you make them tight they stay like that and there is no way they will unravel by themselves! The problem is that they are more visible. On the other hand single knots are not that visible IF and only if they are tight. But since they are single they tend to revert back to their original lose shape over the time and they have this little "8" shape. If you also seal your knots with a sealant... first heat seal them so as to turn them as tiny as possible and then apply the sealant, this way you get the best results!
Thank you so much for this video. Your patience in explaining is awesome. Please, does this work for fibre hair with double knots? Making one and the knots are seriously coming loose and I read your comment that double knots are tight themselves and shouldn't come loose. Will this help?
Thank you very much for ur reply. I learn a lot from your videos and I am about to start making my first but I don't think I bought the right wig cap. N I definitely will have to get a smaller hook tomorrow. I thought the one I had could do it but it's much bigger than I thought for the mess
Hey Super Wig Maker, I really enjoy your tutorials. Quick question: for treating a larger area, would an iron (normally used for clothing) work as well?
Hey girl, I assume your clothing iron does have heat settings, the thing is that you have to make sure that you keep a good pull of the hair so when the hair is heated and turns more malleable, the knots will tighten, then you remove the heat and keep pulling gently so it cools down with the knots tight. If you do that in a big area I don't know how it will work for the knots to turn tinier. So I think it is better for larger areas to use a blow dryer so you have a thicker line of hair and more wirth do it so you don't have to do it so precisely with a straightening iron. I will make a video on how to do it on larger areas but with a hair dryer.
super wig maker is it possible for u to show a magnified demo of how to tie the knot on the needle before pulling it thru th holes... it's difficult to see. thnx!
For hair I only buy synthetic cause human is expensive and it usually turns to be shitty quality. I buy it from ebay, synthetic heat resistant. Lace, I haven't bought any cause some friends sent me a huge amount of it but I can easily let you know that amazinghairstore.com lace is pretty much the next best thing. It is like French lace, strong and undetectable.
Yep yep, that is correct, just part the hair just like you would if you would straighten it. Aim the heat in the roots, pull them tight while the heat is going on, keep the tension, remove the hot air, keep it like that for a few seconds and when it is cool you just let it go and the knots are heat sealed temporary until the time reverts it back to a loser shape or more heat is applied and loses the shape! Also when you straighten the hair (later, once the knots are heat treated) try not to put the heat close to the knots cause if they get heated well and there is no tension some knots will get a new temporary shape (which might be loose)
Hi, you do a great job, thank you for your work and videos. May I ask you to do a wig project for me please? Also could you please let me know how can I get in touch with you? Thank you
Well you would need a stitching needle and some sturdy thread to do so. You could watch my reddish synthetig wig bideo, I show this in the beginning and you can click at this link it will take you straight to 5:39 of the video whee I start cutting the top part to add the lace (in your case the lace closure) ruclips.net/video/DEgDP36R3_E/видео.htmlm39s Of course then I start ventilating which in your case shouldn't be necessary since you have a closure which is ready. And of course since your closure already has dimensions you need to measure how much you need to cut on top!
Dear Super Wig Maker, I tried numerous times to go to your website and all I get is pop ups that will not go away until I close it completely so I am messaging you here. I love you videos and your work!! I have learned so much from you!! Thank you!! I am not new to hair, I've been a hairstylist for over 25 years, but I am new to wig making and hair extensions and I'm so far unable to find an honest company to purchase virgin human hair. They all say virgin unprocessed hair but when I get it, it is all processed hair so far. The dishonesty in this industry is mind boggling. Anyway, I was hoping you could tell me who some honest hair vendors are? I dont know if you sell virgin human hair on your site or not because, like I said, I'm unable to view your site....thank you and I hope to hear from you!!
It really seems someone doesnt want people to be able to view your site...I get a pop up warning me of malware and then a bunch of pop ups for me to agree to receive notifications, pop ups from you tube that I've won something that wont go away unless i leave your site completely ☹
Hey ... u can contact 919967123333 . They are suppliers of virgin human remy double drawn Indian hair . This is will solve ur problem . They are the best in the country .
If you are looking for Russian hair I can recommend you many suppliers. They cut individual tales and put them to sale to Instagram usually, but they are very expensive . check these accounts, slavichair_kiev , real_russian_hair, devahair_msk
This is Banbury and Postiche 20 Denier, it is not mentioned as Swiss lace but it is very undetectable, fragile and awesome. 10 Denier is the thinnest, 20 Denier is the one I use here, 40 Denier is like light French Lace, then it gets thicker and thicker!
Good day Sir. Thank you for your videos it helps a lot. I have a question. After making i closure i noticed after a while the hair starts to peek out from the other side of the net
Hello! Thank you for your video! I have very small holes in the fabric so I use a needle for beads and a crochet hook, it looks like the same, but it takes a lot of time. A want to ask you , have you ever used a liquid silicone to fix the result I mean for knots on the inner side? Thank you!
I used knot sealers in the past but now I use something like liquid rubber latex, it is water soluble while wet so I can thin it as much as I can, it comes in all skin tone colours (and I can mix to make any custom) and when it sets it is a fine film of rubber coating the whole netting along with the knots (I burst any clogged lace oles so it won't make membranes) and it is water resistant so it is permanent.
Super Wig Maker hello from spain. can you make a video to show the process of rubber latex in lace to seal the knots. Thank you very much, I love your videos.
maridome podrias decir como hacer las bases de silicona o que es lo que llevan las protesis de caballero indetectable gracias un saludo me gusta mucho tus videos
You can buy it from my site in the normal asian thick lace. I do not have the much finer swiss lace on my site yet. I plan to get it in the future. superwigmaker.com/product-category/tools/
Futura by far the best and most workable. You can use a latch tool if the base has big enough holes, my latch tools in my site are the tiniest possible, 1mm only, and they are rather affordable. www.superwigmaker.com/tools
another question i have is, if i buy a hair bundle that comes in different length, how do i layer the hair? short at the back progress to the longer pieces at the front?
...that depends on how you want you end piece to look, if you want a layered effect, sue long hair in the lower parts and shorter on top, it will create dramatic layering, if you do the opposite you will get a blunt cut-style, where the ends are thicker and not so layered.
Please what size of ventilating needle do you use?I have a lace fabric closure and the holes are so tiny. I want to order the needles online but I'm not sure which size to go for.Thanks
Ema'sGlam the size only matters for how many strands the hook will grab, if your needle can't pass through the holes of the lace then you need to buy lace with bigger holes! I usually use a size 1 needle
i don't prefer to bleach the knots, due to the shedding. We use foundation, however if you have double knots do you advise to use this heat method on lacefrontals?
+Lucinda Pelone double knots should be tight by themselves and they will not become loosened, you can still try to use this but I doubt anything will happen, if the knots are loose and double I do not think this will help at all.
+Super Wig Maker I went to your website and saw the lace. It states that it is not the kind for the perimeter of a wig. It also said that when someone orders, that you send samples of all the other kinds that you sell. Now when you say that are you saying different TYPES like strength or purpose of the lace or are you saying samples of color? Hope to hear from you soon and thank you for these wonderful videos! ❤
Sorry for the late replies, this thing is getting out of hand, I am getting hundrets of mails and comments per day and it is impossible to reply. The lace I have is asian, thus thick and it is the one they use for premade wigs (even int he hairlines) but I don't use it for hairline, I use swiss lace that I don't have on my site yet. Yes I do sent a small paper with the lace sample only to show the colours.
+Shawnna Hines I literally just decided to stop making wig refurbishing. It always ends up more job than I think and it just drains my time without much profit!
You can but then you would have to use a permanent sealant to keep it like this, once human hair get wet, it starts to swell and revert back to the original shape. So it would loosen up.
Super Wig Maker do you have a clip of how to permanently seal human hair after heat treating? I tried a link u sent in one of your replies (I think it was with thinned nail polish) but the link didn’t work. Thank u!!
It is plain to see how effective your technique is while heat-sealing knots. Thank you so much for sharing your technique. Thank you!
you are really the real mvp...I.made this comment on another video but you are the truth, the best hands down, no questions asked
I been watching videos all day. This one is thee most self-explanatory after watching this I wanna make a wig
Thank you for sharing this, I always learn something new from your videos.
Hey thanks for passing by
Omg! Amazing! You must be the most patient person to do this! 😄 I found your channel as I wanted to know how wigs are made. I got some full lace remy HH blonde wigs to custom dye for myself. Wow so this is how all the strands are put on!!
+Fiona Fay Hey, thi sis how it should be done in order for it to look good, most asian wigs are kinda badly and bulky made to save time and thus price.
Great job as always! I have never tried a flat iron, I'm much too lazy! But it seems to do a really great job of sealing the knots. Thanks for the video!
Try the blow dryer, it should do the same work
I only do single knots for babyhairs now because my clients don't glue their units down they sew them in so I give them double knots with single strands, but that's an interesting method, I might have to try that on a unit for myself.
Hey hey Lily, thanks for passing by and leaving a comment. You are right about the knots.
Double knots are secure, once you make them tight they stay like that and there is no way they will unravel by themselves! The problem is that they are more visible.
On the other hand single knots are not that visible IF and only if they are tight. But since they are single they tend to revert back to their original lose shape over the time and they have this little "8" shape.
If you also seal your knots with a sealant... first heat seal them so as to turn them as tiny as possible and then apply the sealant, this way you get the best results!
Love this technique! I will try this for my custom ventilated pieces. Thanks for this amazing information!
I always love your tutorials and tips. Thank you for sharing and please keep the videos coming.
Thanks, I am making another video at the moment :D Will post it soon!
Thank you so much for this video. Your patience in explaining is awesome. Please, does this work for fibre hair with double knots? Making one and the knots are seriously coming loose and I read your comment that double knots are tight themselves and shouldn't come loose. Will this help?
Omg i didn't notice this video earlier,,,my bad lol,, I'm gonna do this method on my lace frontal..thanks dude,,
😮 this is sure the best video I have ever seen. Thanks for all this information 👍
I love your video. .i think I may do this..just having a problem knotting!
Love it. Thank You. Finally a professional.
You are so good at tutorials! Thank you
Great craftsmanship work, congratulations you have an awesome job
Soooo useful!! I didn't even think about this, thank you so much
Can you do this on a completed wig, one purchased? Or is it only able to be done in the making process?
Where can i buy the HD lace
What do you use to secure your lace while you are weaving? It looks like an embroidery hoop.
Es admirable ,la paciencia y el trabajo.
thanks for sharing.
Thanks for coming by, you are the first commenter!
@@SuperWigMaker toi co lam hang nay
Thank you very much for ur reply. I learn a lot from your videos and I am about to start making my first but I don't think I bought the right wig cap. N I definitely will have to get a smaller hook tomorrow. I thought the one I had could do it but it's much bigger than I thought for the mess
Hey Super Wig Maker, I really enjoy your tutorials. Quick question: for treating a larger area, would an iron (normally used for clothing) work as well?
Hey girl, I assume your clothing iron does have heat settings, the thing is that you have to make sure that you keep a good pull of the hair so when the hair is heated and turns more malleable, the knots will tighten, then you remove the heat and keep pulling gently so it cools down with the knots tight.
If you do that in a big area I don't know how it will work for the knots to turn tinier. So I think it is better for larger areas to use a blow dryer so you have a thicker line of hair and more wirth do it so you don't have to do it so precisely with a straightening iron.
I will make a video on how to do it on larger areas but with a hair dryer.
Thank you!
ladymayala
Hey hey, I just made a video to answer your question:
Heat Sealing the Knots with Blow Dryer (2nd video)
Ill check it out! Thank you.
super wig maker is it possible for u to show a magnified demo of how to tie the knot on the needle before pulling it thru th holes... it's difficult to see. thnx!
I wish you success in your work and their private life. You can download Arabic subtitles
Thanks for this video. I want to try it , please how can I get the middle pin to try
hello Super Wig Maker :) U doing an amazing job and I'd like to ask where to buy or order lace and hair ? thnx
For hair I only buy synthetic cause human is expensive and it usually turns to be shitty quality. I buy it from ebay, synthetic heat resistant.
Lace, I haven't bought any cause some friends sent me a huge amount of it but I can easily let you know that amazinghairstore.com lace is pretty much the next best thing. It is like French lace, strong and undetectable.
New video that suits your question like a glove!
Lace, kinds and where to buy it!
Hi SWM. So with the blow dryer just apply the heat to the roots and pull slightly correct? thanks
Yep yep, that is correct, just part the hair just like you would if you would straighten it. Aim the heat in the roots, pull them tight while the heat is going on, keep the tension, remove the hot air, keep it like that for a few seconds and when it is cool you just let it go and the knots are heat sealed temporary until the time reverts it back to a loser shape or more heat is applied and loses the shape!
Also when you straighten the hair (later, once the knots are heat treated) try not to put the heat close to the knots cause if they get heated well and there is no tension some knots will get a new temporary shape (which might be loose)
There you go honey, this is how I would do it with the blow dryer
Heat Sealing the Knots with Blow Dryer (2nd video)
Is there another way to seal the knots without using heat, and is there a way to seal the knots permanently?
your amazing, neat work
This will only work with plastic hair right ?
Gonna test this with some beard wigs making atm. Hopefully makes them last much longer.
Excellent tutorial do you have shop
Hi, you do a great job, thank you for your work and videos.
May I ask you to do a wig project for me please? Also could you please let me know how can I get in touch with you? Thank you
Hi, I have a half wig that i want to add a lace closure to..what tools are you using?
Well you would need a stitching needle and some sturdy thread to do so.
You could watch my reddish synthetig wig bideo, I show this in the beginning and you can click at this link it will take you straight to 5:39 of the video whee I start cutting the top part to add the lace (in your case the lace closure)
ruclips.net/video/DEgDP36R3_E/видео.htmlm39s
Of course then I start ventilating which in your case shouldn't be necessary since you have a closure which is ready.
And of course since your closure already has dimensions you need to measure how much you need to cut on top!
Great, thank you so much!!!
where do you purchase the lace material itself
amigo ,poste os videos com opçao de traduçao
Dear Super Wig Maker, I tried numerous times to go to your website and all I get is pop ups that will not go away until I close it completely so I am messaging you here. I love you videos and your work!! I have learned so much from you!! Thank you!! I am not new to hair, I've been a hairstylist for over 25 years, but I am new to wig making and hair extensions and I'm so far unable to find an honest company to purchase virgin human hair. They all say virgin unprocessed hair but when I get it, it is all processed hair so far. The dishonesty in this industry is mind boggling. Anyway, I was hoping you could tell me who some honest hair vendors are? I dont know if you sell virgin human hair on your site or not because, like I said, I'm unable to view your site....thank you and I hope to hear from you!!
It really seems someone doesnt want people to be able to view your site...I get a pop up warning me of malware and then a bunch of pop ups for me to agree to receive notifications, pop ups from you tube that I've won something that wont go away unless i leave your site completely ☹
Hey ... u can contact 919967123333 . They are suppliers of virgin human remy double drawn Indian hair . This is will solve ur problem . They are the best in the country .
If you are looking for Russian hair I can recommend you many suppliers. They cut individual tales and put them to sale to Instagram usually, but they are very expensive . check these accounts, slavichair_kiev , real_russian_hair, devahair_msk
Hi can you tell me where you buy your swiss lace? Thank You
This is Banbury and Postiche 20 Denier, it is not mentioned as Swiss lace but it is very undetectable, fragile and awesome.
10 Denier is the thinnest, 20 Denier is the one I use here, 40 Denier is like light French Lace, then it gets thicker and thicker!
ok great thanks so much, I did see that you made a video on lace as well after asking this ? Still thanks for the reply and all your awesome videos!
So heat sealing reduces shedding??
yes it does
This is nice please I want ask that did you give space in the knots?
hi what is the name of the tool your using?
+Sabrina Brathwaite I use a straightening iron for hair, it is 1cm wide for short hair so I can use it easily for close up areas like the knots etc.
Good day Sir. Thank you for your videos it helps a lot. I have a question. After making i closure i noticed after a while the hair starts to peek out from the other side of the net
Thanks a lot, so helpful.
on your site which lace is this i really want it
Amazing thank you 🙏 for your help
Waaaw very interesting i so see the difference man.
I need to know if you can do a 360 front lace with closure, and show how you close the whole wigs and how to create any hair line
Hello! Thank you for your video! I have very small holes in the fabric so I use a needle for beads and a crochet hook, it looks like the same, but it takes a lot of time. A want to ask you , have you ever used a liquid silicone to fix the result I mean for knots on the inner side? Thank you!
I used knot sealers in the past but now I use something like liquid rubber latex, it is water soluble while wet so I can thin it as much as I can, it comes in all skin tone colours (and I can mix to make any custom) and when it sets it is a fine film of rubber coating the whole netting along with the knots (I burst any clogged lace oles so it won't make membranes) and it is water resistant so it is permanent.
Super Wig Maker hello from spain. can you make a video to show the process of rubber latex in lace to seal the knots. Thank you very much, I love your videos.
maridome podrias decir como hacer las bases de silicona o que es lo que llevan las protesis de caballero indetectable gracias un saludo me gusta mucho tus videos
reyes navarro Hola, yo también estoy intentando averiguar cómo se hacen las prótesis de silicona indetectables. Tú sabes como se hacen? gracias
Where are located. How is it to may a wig.
Where do you buy the net or why is it called???
You can buy it from my site in the normal asian thick lace. I do not have the much finer swiss lace on my site yet. I plan to get it in the future.
superwigmaker.com/product-category/tools/
What is the best synthetic hair to create a lace wig? And can I use a normal crochet needle or a small latch hook needle to do the ventilation?
Futura by far the best and most workable. You can use a latch tool if the base has big enough holes, my latch tools in my site are the tiniest possible, 1mm only, and they are rather affordable.
www.superwigmaker.com/tools
thank you
another question i have is, if i buy a hair bundle that comes in different length, how do i layer the hair? short at the back progress to the longer pieces at the front?
...that depends on how you want you end piece to look, if you want a layered effect, sue long hair in the lower parts and shorter on top, it will create dramatic layering, if you do the opposite you will get a blunt cut-style, where the ends are thicker and not so layered.
Do yu seal then bleach ? Or bleach then seal
bleach then seal
Super Wig Maker ohhh. I would have thought other way around. May you please explain?
Please what size of ventilating needle do you use?I have a lace fabric closure and the holes are so tiny. I want to order the needles online but I'm not sure which size to go for.Thanks
Ema'sGlam the size only matters for how many strands the hook will grab, if your needle can't pass through the holes of the lace then you need to buy lace with bigger holes!
I usually use a size 1 needle
Super Wig Maker ok thanks a lot!The size of my lace fabric is about the same size of fabric used on lace closure hair.
Ema'sGlam
Then you shouldn't have a problem with it, you just need to be more careful I guess.
Super Wig Maker Thank you so much for responding!!I appreciate, and you do am AMAZING JOB.God bless you!
Can we do this with kinky curly hair?? Please do a video😭
i don't prefer to bleach the knots, due to the shedding. We use foundation, however if you have double knots do you advise to use this heat method on lacefrontals?
+Lucinda Pelone double knots should be tight by themselves and they will not become loosened, you can still try to use this but I doubt anything will happen, if the knots are loose and double I do not think this will help at all.
Thank you for your message. By the way did you received our email?
Lucinda Pelone the spray tan for your legs is better than foundation and they have all colors from light to dark
what tools are you using the mesh and the holder
Lace and needle with holder
superwigmaker.com/product-category/tools/
+Super Wig Maker I went to your website and saw the lace. It states that it is not the kind for the perimeter of a wig. It also said that when someone orders, that you send samples of all the other kinds that you sell. Now when you say that are you saying different TYPES like strength or purpose of the lace or are you saying samples of color? Hope to hear from you soon and thank you for these wonderful videos! ❤
Sorry for the late replies, this thing is getting out of hand, I am getting hundrets of mails and comments per day and it is impossible to reply.
The lace I have is asian, thus thick and it is the one they use for premade wigs (even int he hairlines) but I don't use it for hairline, I use swiss lace that I don't have on my site yet.
Yes I do sent a small paper with the lace sample only to show the colours.
Thank you so much for the reply, I really appreciate it. Do you know how soon you will start selling swiss lace?
omg! so thx for that and I swear I've dreamed about this video before even watching it
Can you use the process to premodern wig? Or is it a waste of time
Sorry premade
So helpful. Thank you so much 😊
do we need microscope? i tried its so hard to see
hi I have a human hair full lace wigs I need you to fix
+Shawnna Hines I literally just decided to stop making wig refurbishing. It always ends up more job than I think and it just drains my time without much profit!
Amei seu vidio, e muita agilidade
thank you
What kind of needle is that? I must know!
Short needles from my site:
superwigmaker.com/product/german-ventilating-needles/
Great work
Can u heat seal with human hair, or is heat sealing only for synthetic.
diamond webb he mentioned something about human at 5:00 so i assume its same
You can but then you would have to use a permanent sealant to keep it like this, once human hair get wet, it starts to swell and revert back to the original shape. So it would loosen up.
Super Wig Maker do you have a clip of how to permanently seal human hair after heat treating? I tried a link u sent in one of your replies (I think it was with thinned nail polish) but the link didn’t work. Thank u!!
This is very simple
I make my wig
Arsalan from Pakistan
I live in Pakistan and I need one hair piece making. Perhaps you may be interested in doing it for me
Hey. Amazing video! So helpfull!!! What type of hair do you use? Do you use braiding hair or do you cut hair from the weft/track?
This specific one was synthetic hair (similar to braiding hair). But I have used human hair either in bulk or cut from wefts, it makes no difference.
Por favor portugues por favor .sou dó brazil muito obrigada
Yu could see the mesh better first time round ....Good video though 👍
Are you still doing wigs
Cuando sella con la silicona el pelo no pierde movilidad .:..:¿
Do u make wigs for people
where can i get the hair?
top quality human hair supply is from: www.aisomhair.com
@@aisomhair5552 the THIRST!
Awesome!!
This is so micro. I could never do this
very helpful
yes
Please what type of hair can i use for it?
Mary real human hair is better though still u can use fake hair like polyester. u can find some cheap human hair on Amazon.
pls were can l get the needle is it normal crohset needle
Simply Rosemary no it's a wig ventilation needle (google it)
Thanks
😮 WOW! Ok.
Hi I am masud from india
Thank you so much sir.
How to make hair straight????
I have made 3 videos in my channel for silk tops, please search them there you will find them
👏👏👏👏
No queda firme , lo hice para una peluca y al lavarla quedó un desastre 😫😫😫se necesita un nudo más firme
Me pasó lo mismo omg horrible! Después de días en eso!
dep nhug minh cung muon lam
🤟🌺👍
How many hair you need to make a wigs
I am wig makes in Kolkata
🧏🏽♀️🧏🏽♀️
What the fuck did I just watch?
😂😂😂😂
😜 Lol
A video
where do you purchase the lace material itself
I have my own site for materials:
www.superwigmaker.com
sorry for the late reply
Great work
Thank you