You velcro some type of door protector on the rear door. Can you let me know about it. We travel with 2 pups in a limited dually and want to protect the door panels
Great videos Trenton! I am just setting up a rig and do not yet have a silder hitch. You mentioned that you had a Superglide for sale in this video. I know it was over a year ago, but is it still available? I am on the fence about Superglide or Autoglide. If one were priced better than the other I would go that direction. Please let me know. Thanks.
Good video. We purchased the 2019 Ram 3500 short bed dually in December in anticipation of buying a fifth wheel. We just ordered our fifth wheel and are now researching hitches and this is one we are looking at because of the auto slider function. Wanted to know how you like it so far since you did did this video and would we be able to put a tonneau cover on the bed. Thanks for your advice.
So you like the super glide the best? I just bought a momentum with a Dodge Ram 6.4 bed and need an auto slider. Since you work in the industry, can you send me the part numbers for what I need?
Oh, thought you were hooking up with it. I've been debating this Demco, the Pullrite Super Glide or a B&W trunover ball & Anderson Ultimate. Cons: Anderson just kinda scares me being light & aluminum & having all the stresses of towing on 1 attachment point. Pullrite's auto slider is heavy typically & the damn capture plate shit. Demco's issue really only being weight for me but I really don't plan on removing the hitch much. If I did I'd just undo the pins in the bed and use the trailer jacks to lift it up then set it back down on the bed. How is this Demco work if you had to hook up on an angle? I'm not talking at an angle overhead view, on a angle left to right? I think the capture plate on a Superglide would be the worse to try on any angle. Anderson would have no issues since its dropping onto the ball. At home where I would be able to park a trailer it slopes a bit left to right from my edge of the yard out into the street & driving it up to my house is a 10 degree slope to which at the top I'd have to turn right then reverse, then right again toward the slope down, then reverse again to get it turned around & parked along side my house. Its dead ends both directions once you're at the top of my hill but at least I'm right there on a corner.
Awesome! There’s a ton of value in that!
Subscribed. We just bought our ram 3500
You velcro some type of door protector on the rear door. Can you let me know about it. We travel with 2 pups in a limited dually and want to protect the door panels
What about your payload? And the pin box weight will all the stocks in…
Nice video dude. I just bought the same truck, mine is black. Thanks again.
thank you for this video, very helpful.
We arw contemplating a slider hitch. But can you tell me the hitch height from the bed to the top of the hitch?
Nice truck..
Excellent video. Thanks for making it. Can you let me know which Demco hitch you bought? Is it the 8550034?
Great videos Trenton! I am just setting up a rig and do not yet have a silder hitch. You mentioned that you had a Superglide for sale in this video. I know it was over a year ago, but is it still available? I am on the fence about Superglide or Autoglide. If one were priced better than the other I would go that direction. Please let me know. Thanks.
What brand are the door covers on the inside to protect from puppy’s?
Good video. We purchased the 2019 Ram 3500 short bed dually in December in anticipation of buying a fifth wheel. We just ordered our fifth wheel and are now researching hitches and this is one we are looking at because of the auto slider function. Wanted to know how you like it so far since you did did this video and would we be able to put a tonneau cover on the bed. Thanks for your advice.
So you like the super glide the best? I just bought a momentum with a Dodge Ram 6.4 bed and need an auto slider. Since you work in the industry, can you send me the part numbers for what I need?
You have any issues with the puck adapters not lining up?
Oh, thought you were hooking up with it.
I've been debating this Demco, the Pullrite Super Glide or a B&W trunover ball & Anderson Ultimate.
Cons:
Anderson just kinda scares me being light & aluminum & having all the stresses of towing on 1 attachment point.
Pullrite's auto slider is heavy typically & the damn capture plate shit.
Demco's issue really only being weight for me but I really don't plan on removing the hitch much. If I did I'd just undo the pins in the bed and use the trailer jacks to lift it up then set it back down on the bed.
How is this Demco work if you had to hook up on an angle? I'm not talking at an angle overhead view, on a angle left to right? I think the capture plate on a Superglide would be the worse to try on any angle. Anderson would have no issues since its dropping onto the ball.
At home where I would be able to park a trailer it slopes a bit left to right from my edge of the yard out into the street & driving it up to my house is a 10 degree slope to which at the top I'd have to turn right then reverse, then right again toward the slope down, then reverse again to get it turned around & parked along side my house.
Its dead ends both directions once you're at the top of my hill but at least I'm right there on a corner.
I'm sorry but what was the point of this video?
It's not dodge