OSOYOO Robot Car Starter Kit Lesson 1: Install UNO R3 Board and Motors on Chassis

OSOYOO Robot Smart Car for Arduino DIY Learning Kit with tutorial Wifi Bluetooth IR Modules and Line Tracking Ultrasonic Sensors
Lesson 1 Tutorial : osoyoo.com/?p=4906
OSOYOO Robot Car for Arduino (USA link) amzn.to/2OKYX77
Buy refurbished OSOYOO robot car with 50% discount :
osoyoo.store/p...

[@quantumrealmtourist71]

I have had a couple errors while running sample code. Is there an updated one?

[@osoyoo1265]

we upload our robot car and code, you can follow our instruction: osoyoo.com/2018/12/21/osoyoo-robot-car-kit-tutorial-introduction/

[@utro_v_gorah]

Why doesn't ZIP have the file configuration.h?

[@osoyoo1265]

Configuration.h sets in code, as someone can't upload the code with Configuration.h

[@leonelluz7587]

I cant find Arduino Uno in manager, some help

[@osoyoo1265]

Do you mean you can't find the Arduino UNO in Arduino IDE or you can't find the port in Arduino IDE?
If you don't find the Arduino UNO in Arduino IDE, the name for the board is Arduino/Genuino UNO.
If you don't find find the port in Arduino ID, you need to try another board or USB cable.

[@nikhilkatakwar7852]

I want kit

[@kirtjoe283]

This is very confusing! Please help!

[@osoyoo1265]

Please check osoyoo.com/?p=4906

[@kirtjoe283]

OSOYOO ok, thank you!

[@dellajaden5237]

Agreed terrible instructions on this video

[@mrmatthew6077]

wtf are the batteries the space is massive

[@osoyoo1265]

The battery case has been improved and it can fit most of 18650 batteries now.

[@deepakbains6755]

Please create all in one smart car(Bluetooth control,line following, obstacles avoidance) please share code and circuit

[@osoyoo1265]

You can go to our tutorial link.

[@kodak_jack]

The Software part goes through it too fast. I hope the rest isn't like this one. Give it audio, please.

[@osoyoo1265]

Thanks for your suggestion. You can follow our new video for new version robot car:
V2.0 : ruclips.net/p/PLvCUFipQZCUu3LF1ucYZ5x4CWBksZvkol
V2.1: ruclips.net/p/PLvCUFipQZCUtstVBU-7gLYCLhI1fRuca3

[@geminiman2831]

can we use AAA batteries

[@kahilzhang5591]

krishna dev no you can’t but you can use these: www.amazon.ca/gp/product/B01JBTXQVU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

[@osoyoo1265]

The robot car kit just work under 7V, and the battery case is just for 18650 battery. you can order 18650 battery and charger on www.amazon.com/dp/B07ZR8NKJL?ref=myi_title_dp

[@dustinshoop6770]

At 6:40 is so confusing help

[@osoyoo1265]

This is about installing an old battery case for 18650 to DC connector and you need to follow the link to install the DC connect: osoyoo.com/2019/01/08/how-to-properly-install-wires-in-dc-connectors/
If you get the battery case with DC connector, you needn't install this

[@kirtjoe283]

Woah.

[@osoyoo1265]

Thank you for your support

[@massimomastromattei4288]

At 4:38 which m3 screws and nuts are they

[@hippieluv2001]

The pne with nuts, m3*10.

[@osoyoo1265]

Do you mean you don't get m3 screws and nuts in your package?

[@aidenhijuelos3226]

How do I connect the voltage meter to the driver module, is there a preconnected cord to it or do I need to connect one, because I do not have one.

[@aidenhijuelos3226]

?

[@aidenhijuelos3226]

None of these cords are matching mine now..

[@aidenhijuelos3226]

Please help

[@osoyoo1265]

Connect the voltage meter to the driver module with male-male jumper wires