Very nice Dentex Andrea! I still can't believe how you lost that close range shot!!! Too eager to press the trigger on that one but you finally got a good one! Nice seeing you mate!
thank you buddy 😍 yes either too far or too close, I can only shoot in the middle 😂 The current was so strong that aiming was really hard, and the mr carbon is 105 quite a challenge to keep straight, only that precise spot holds crazy current, it's the corner of the island.
congrads with sinagrida! I also have simrad nsx and love it a lot especially with 3-in-1 eye, which makes photo-scan of the bottom, helps a lot with new spots. In this spring I had a problem with C4 and sinagrides, I aim near the head but the shot goes to the tail (cos fish is very fast) and I lose some fish. By default, the solution is of course mega double roller gun at least 1,2m ))) but I changed rubbers to new (meandros energy) and the problem gone, shots are placed where I aim
my friend thanks for hint about mr carbon, I will try it, how long did you cut the rubbers? and what diameter did you pick? Generally I'm ok with the mr carbon, but I miss sometimes because it's not my main speargun, I normally hunt with the pathos 100 invert and 7mm shaft, no recoil and fast shot. The simrad has proven to be a great tool so far, I also got the 3-1 eye, really nice 👌 I would pick the bigger size maybe because sometimes the 4 split screen makes things very little 😅 but is it worth the extra money for 3 inches more? 💸💸💸
@@ArielSpearfishingTeamas my teacher told me, your aim the gun and measure the full rubbers working length, after you go to the rubber catalog and check the streigh factor. Length / streigh factor = rubber cut length In meandros rubber it was written 3.6, I cutted and it's completely wrong. So after I used factor by 3 and my rubbers now are 29cm working length +2 cm for holders, diameter is 14mm, as originals. My C4 is 95cm long. I realised the gun start to shoot a bit lower so I fix the flopper a bit and now it's perfect, love the preciseness. I love conventional guns, simple and have enough power. I used to have a roller, all this mess with aiming, problem with accuracy, never ever. I use simrad in map mode during navigation and on a spot I switch to side scan + bottom scan, as for me 9 inches is enough, 12" will be harder to fin in console of the boat.
Nice adventure Adrea and nice fish! As always, have fun!
thank you buddy!!! come back to the speargun!!! 😊
Beautifull video my friend!
thanks buddy 😊 I have another one scheduled for tomorrow 👀👀👀
Nice capture Andrea! The dentex is always the holy grail here in Greece!
yes indeed! thank you 😊
Very nice Dentex Andrea!
I still can't believe how you lost that close range shot!!!
Too eager to press the trigger on that one but you finally got a good one!
Nice seeing you mate!
thank you buddy 😍 yes either too far or too close, I can only shoot in the middle 😂
The current was so strong that aiming was really hard, and the mr carbon is 105 quite a challenge to keep straight, only that precise spot holds crazy current, it's the corner of the island.
congrads with sinagrida!
I also have simrad nsx and love it a lot especially with 3-in-1 eye, which makes photo-scan of the bottom, helps a lot with new spots.
In this spring I had a problem with C4 and sinagrides, I aim near the head but the shot goes to the tail (cos fish is very fast) and I lose some fish. By default, the solution is of course mega double roller gun at least 1,2m )))
but I changed rubbers to new (meandros energy) and the problem gone, shots are placed where I aim
my friend thanks for hint about mr carbon, I will try it, how long did you cut the rubbers? and what diameter did you pick?
Generally I'm ok with the mr carbon, but I miss sometimes because it's not my main speargun, I normally hunt with the pathos 100 invert and 7mm shaft, no recoil and fast shot.
The simrad has proven to be a great tool so far, I also got the 3-1 eye, really nice 👌 I would pick the bigger size maybe because sometimes the 4 split screen makes things very little 😅 but is it worth the extra money for 3 inches more? 💸💸💸
@@ArielSpearfishingTeamas my teacher told me, your aim the gun and measure the full rubbers working length,
after you go to the rubber catalog and check the streigh factor.
Length / streigh factor = rubber cut length
In meandros rubber it was written 3.6, I cutted and it's completely wrong.
So after I used factor by 3 and my rubbers now are 29cm working length +2 cm for holders, diameter is 14mm, as originals. My C4 is 95cm long.
I realised the gun start to shoot a bit lower so I fix the flopper a bit and now it's perfect, love the preciseness.
I love conventional guns, simple and have enough power. I used to have a roller, all this mess with aiming, problem with accuracy, never ever.
I use simrad in map mode during navigation and on a spot I switch to side scan + bottom scan, as for me 9 inches is enough, 12" will be harder to fin in console of the boat.
omg ive missed shots like that as well, its always in the shallows where the current moves you and the gun randomly ☠
its all part of the game
true that! but to me it's also freaking exciting to chase the fish in the shallow, play hide and seek with them hiding between rocks! I love that 😜