How to Make a Professional Supercapacitor at Home. (Each Detail, Step by Step) 200 F
HTML-код
- Опубликовано: 14 май 2023
- In this video l will tell and show you how to make a Supercapacitor at home. It will be 1.4 V and 200 farad. I used copper foil, graphite powder and activated carbon. After making Supercapacitor l test it. It works very well. It charge and discharge very fast. #supercapacitor, #capacitor, #battery, #diy, #homemade, #graphene, #graphite, #activatedcarbon, #activatedcharcoal
How to make a Supercapacitor at home,
How to make professional Supercapacitor at home,
How to make graphene Supercapacitor,
How to make graphite Supercapacitor,
How to make activated carbon Supercapacitor,
How to make graphite electrodes,
How to make conductive paint,
Electrolyte for Supercapacitor,
Sodium hydroxide electrolyte,
Sodium hydroxide solution,
Making Supercapacitor at home,
Diy Supercapacitor,
Homemade Supercapacitor,
supercapacitor,
graphene supercapacitor,
supercapacitor battery,
supercapacitor vs battery,
maxwell supercapacitor,
hybrid supercapacitor,
eaton supercapacitor,
skeleton supercapacitor,
difference between capacitor and supercapacitor,
edlc supercapacitor,
supercapacitor applications,
supercapacitor as battery,
supercapacitor advantages and disadvantages,
supercapacitor and pseudocapacitor,
supercapacitor activated carbon,
asymmetric supercapacitor,
advantages of supercapacitor,
aqueous supercapacitor,
supercapacitor bank,
supercapacitor battery circuit,
battery vs supercapacitor,
battery and supercapacitor,
supercapacitor charging circuit,
supercapacitor calculator,
supercapacitor charger,
supercapacitor charging and discharging circuit,
supercapacitor capacity,
capacitor vs ,supercapacitor,
construction of supercapacitor,
charging supercapacitor,
carbon supercapacitor,
capacitance of supercapacitor,
define supercapacitor,
supercapacitor energy density,
supercapacitor energy storage,
supercapacitor electrolyte,
supercapacitor esr,
supercapacitor example,
supercapacitor energy calculator,
electrolytic capacitor vs supercapacitor,
flexible supercapacitor,
flat supercapacitor,
fast-charging supercapacitor technology,
features of supercapacitor,
function of supercapacitor,
supercapacitor graphene,
supercapacitor graphite,
supercapacitor gel electrolyte,
graphene based supercapacitor,
supercapacitor how it works,
supercapacitor homemade,
how does a supercapacitor work,
how to charge a 2.7v supercapacitor,
how to charge a supercapacitor,
how long can a supercapacitor hold a charge,
internal resistance of supercapacitor, 
Наука
![MORTAL KOMBAT 1 - KOMBAT PACK 2 REVEAL TRAILER!! [REACTION]](http://i.ytimg.com/vi/Mi2M58zEQVc/mqdefault.jpg)
I made capacitors as a child, I'm 74 so back when I was experimenting it was hard to find them, so you made what you need.
That sounds cool, how you made it?
@@anonimoqualquer5503 2 ways, by making a leyden jar and by rolling up tinfoil sheets in wax paper. I enjoy watching your type of videos, keep up the good work.
Wow nice home ❤ work
thank you for following through with the step by step vid... very much appreciated
No problem my friend. Thanks for your comment.🙏
I think you can improve the quality of your supercapacitor if you replace the ordinary paper with the special one. That is because the ordinary paper is not chemically neutral, it has bleaches and other stuff, so it is somewhat conductive and decomposes easily. By using the right paper you would reduce self-discharge and prolong the life of your device. Great project, by the way!
Thanks bro. You are absolutely right. If the one who wants to make this project use that kind of separator will get better results.
Common printer paper has a lot of clay in it for hardness and durability, as well as other chemical brighteners and stabilizers.
What kind of paper can be used the best one which we can avail easily.
what super capacitor?this is a 100.. 200 nF simple capacitor... he weist the watchers time 😅
Yep, this is why in old tube electronics you have to change out all the paper based capacitors because the paper degrades over time ruining it's insulating properties.
Waiting eagerly for your next video
Thanks bro. I have been posted some more videos. I will be happy if you watch them as well🙏
ashkuruk ealaa maelumatik ahsant mumkin mukawinat albataaria
Thank you for this.... I watched many DIY battery/ supercapacitor videos, but it annoys me that they never tell us the small details. When I try to replicate them, it always fails. The deionized water and the sonication were very helpful tips.
You are very welcome my friend. My intention is help you in any way l can. You will not fail when you try this 👍
Before caping the sup cap add some extra electrolyte and put it in the vacuum chamber for few minutes. Under low vac so it will not foam over and slowly lower
The vac pressure until the foaming stops, always top up the electrolyte. Sup cap can be used sooner, no need to wait 1 day after the vac treatment.
Before caping the sup cap add some extra electrolyte and put it in the vacuum chamber for few minutes. Under low vac so it will not foam over and slowly lower
The vac pressure until the foaming stops, always top up the electrolyte. Sup cap can be used sooner, no need to wait 1 day after the vac treatment.
@@alexgrandino8777
Thanks, I didn't even think of using the vacuum method. It just so happens I bought one for a different project.
It's is just a .0001uf value so don't need to make it
The best video. Thank you so much. I will try supercapacitor like this
You’re welcome my friend. Good luck with that 🙏
You really amazed me with your every video 👏👏👏it is simply excellent
Thanks brother ☺️
This is interesting ❤
Thanks for.this.Didnt know it was simple to make.Awesome.
Thanks
This is one of the best video on youtube ,
Thanks my friend 🙏
Can we do it with aluminum foil this way or is it different
@@kerloesmedhet3480in case you use aluminum foil you have to use different electrolyte because sodium hydroxide immediately destroy aluminum foil. When you change electrolyte depending to this you have to change binder so and so. So it is the simplest way to use copper foil bro.
@@joyofelectronics9782 So boric acid can be used as an alternative to sodium hydroxide
@@kerloesmedhet3480 no☺️it change the structure of the binder white glue. The best one is sodium sulphate for aluminum but instead of white glue use acrylic paint with same ratio 👍
Nice very good
Great idea, long battery life.
The world's best teacher thanks sir
Thanks a lot 🙏
You are freaking awesome.
I hope you can share some information like, what aspect of the methods or materials determines the voltage and the capacitance of the super capacitor?
Thanks my friend l will make a such video soon.👍
Impressive bro. Subbed❤
Thanks bro. Appreciated 🙏❤️
Nice work! btw you can get chemically pure NaOH from soap-making outlets. Drain opener is technical purity, often the pellets are coated with nitrate to minimize the hygroscopic nature. I don't know if this affects it much, but it's a thought. Did you weigh the NaOH and water? Or does any strength solution work?
Thanks brother. It doesn’t affect too much. I had either pure sodium hydroxide but l used drain opener as it can be found easily for people. But the one who wants make this Supercapacitor can use pure and higher quality sodium hydroxide.
Kullandığın kimyasalların ne olduğunu anlamadım. Birde farad miktarı nasıl ayarlanabilir. Pozitif ve negatif nasıl belirliyorsunuz Teşekkürler
Too good 👍
Thanks
Thank you very much for the video!
Very informative!
I would like to clarify. I correctly understood that for the preparation of the active mass you used:
1. 9 grams of activated charcoal powder;
2. 1 gram of graphite powder;
3. 10 milliliters of deionized water;
4. 1 gram of PVA glue.
Before mixing all the components, you processed the mixture of graphite powder and activated carbon in water in an ultrasonic bath.
Then all the components were mixed together and applied to the surface of the previously cleaned copper foil.
Did I understand correctly?
Why did you choose this ratio of components? Have you experimented with other proportions?
You did understand very well. Yes bro l experimented and search for years. This is the best ratio. Make sure that you mixed the mixture very well. Thanks for your comment bro.
@@joyofelectronics9782 Thanks for the answer! In the near future I will try to make a supercapacitor according to your method.
@@user-vi4bm7yr7n no problem my friend. I really appreciate that and l am looking forward to hear about the result of your supercapacitor.🙏 l will be happy if you share with us. Good luck
Ah, the mumble I heard was "active mass". That clarifies nothing.
Hi, can I ask what type of container did you use to store the battery and if it has a size that is thicker and more spacious than what you had use? Thanks.
awesome brother good job
Thanks brother
This Is SUper ! Super Capacitor!
GREAT JOB!
thank you for the video
👍
All that is needed to make a supercap is 2 foils made of an unrective metal, activated charcoal, graphite powder, distilled water and a mesh spacer to ensure the charcoal layer is uniform. Both the graphite and activated charcoal must be free of ions as possible. ❤
Thank u. What other electrolyte type can be used and easly availabe ?
Thanks. This is the most suitable one with white glue and copper foil brother.
Good job my friend, the best content is really useful
Thanks my fellow 🙏
@@joyofelectronics9782 Can we do it with aluminum foil this way or is it different
Aluminum foil is destroyed by sodium hydroxide. You can’t use it.
@@joyofelectronics9782 Waiting for you, my friend, to show us a video of how we make an aluminum capacitor
@@kerloesmedhet3480 👍
Very very honest guy Allah save you and your family.
Thank you so much brother ❤️
In Sri Lanka and India you find those copper sheets and ayurvedic and vedic supplies shops, since these are used for making amulets.
اشكرك على معلوماتك احسنت ممكن لوسمحت المكونات البطرية
Good Video! 👍
Thanks
This is the best diy I have ever watched, thanks so much for this amazing project or more like product
Thanks brother
Nicely done, but consider degassing with a vacuum. Also, consistency might be improved by using doctor blade and a rolling mill for calendering the electrodes.
That’s right 👍
i dont know how youtube algorithm work, i stumbled upon this video. Somehow I learn something new: activated charcoal and graphite. Probably I will use aluminium foil instead, easily available in the kitchen. Thanks for sharing and raise curiosity to build one.
Keep this in mind if you use the same electrolyte and glue with aluminum foil you will not be able to successfull and your Supercapacitor will not work. You have to use different electrolytes and typ of glue with aluminum. So you had better to use copper foil.
@@joyofelectronics9782 wow, thanks for pointing that out! I often passed chemistry class, it is super complex for me it almost fail my high school graduation. I think I can find copper foil in market place. NaOH should be available also there..now, the only limited available is my time.... Lol.
Aluminium will react with sodium hydroxide.
@@ShaLun42 Hi. What electrolytes are suitable for Aluminum foil?
@@manojaravindsankar3859 aluminium foil is just not good for this thing because aluminium is highly reactive
can i know what size the plastic tube for supercapacitor u use?. can i use glass tube and with different size?the height,diameter
Merhabalar dediğiniz şekilde süperkondansatörü yaptım 1,2V ta şarj etmeme rağmen bir süre sonra 5-6 kullanımdan sonra akım düşmeleri gözledim. içine bakınca bakır elektrotlardan biri oksitlenmişti muhtemelen iki tane ayrı ayrı yapıp seri bağlarsak bu sorun çözülebilir.Yada elektroliti değiştirmek lazım galiba.
Selamlar kardeşim. Eğer aktif maddeyi güzel yapıp dökülmeyecek şekilde yaptıysan bu sorunun en muhtemel sebebi. Bakır elektrotlar sıvı buharlaşınca doğrudan sodyum hidroksite maruz kalmıştır. Yaptığını görmeden bir şey demek zor ama bu kadar çabuk deforme olamaz. Benim 5 yıldır kullandıklarım var. Çok çok az düşüş oluyor.
thank for efforts, only two questions what is the composition of the electrode material and the electrolyte and don't think that the same electrodes in the same electrolyte will lead to zero volt? ??
Thanks brother. You can watch this video: ruclips.net/video/dq7tG_2dlg0/видео.htmlsi=q2rMtAU_Fr-Ls9S8
Great job guys. I learn a lot by watching this video and reading comments here. Please can anyone help me with how to charge my supercap using a potentiostat. Kindly help
ellerinize sağlık hocam hem konuşma şeklinizden ve lavabo açıcısını görünce türk olduğunuzu direk anladım :D
Eyvallah kardeşim ☺️
I wish i discover ur channel sooner! Than u so much. Is there s a way to contact u.? Im doin research on biomass derived activated carbon supercapacitor.
Thank you so much my friend. Unfortunately here is the only way you can contact with me. But l will try to help you in any way l can. So you can ask everything you want brother.
Can please tell me the ratio of the copper foil cleaner ( H2O2 + HCl )
And the compositon of the paint applied over the copper foil and the electrolite liquid
70% hydrochloric acid 30% hydrogen peroxide. But the ratio is not very important. You can also dilute the solution with water.
Thank you for this video! Can't wait to build my own supercap
My recommendation is to make shorter version of the video, people usually get tired of watching so long tutorials
I know that brother but l wanted to give and explain all the details and make it more sensible.
I know, right? People just have to rush off to the next tutorial they have to lap up instead of actually building anything.
Can I kindly request for the articles used for research purposes?
👏
Please material, chemicals , how much qty mix, mentioned in description or your website link.
Do you think it will give good results if I only use the activated carbon without using the graphite?
Not as good as mix of them. Because graphite plays a critical role to increase conductivity. If you don’t add graphite the esr of the cap will be a significantly high.
I suppose you can take graphite from electrode of AA/AAA zinc battery
A capacitor will have seperators known as dielectrics. There would typically not be electrolytes (conductive solution) saturating the dielectric. This device may be more of a battery than a caoacitor. I am going by memory so I maybe missed something in the video. 200 fd, or even 100 fd are a tremendous amount of capacitance, is it not? I have personally used a 1 fd cap, some 20 years ago. About the diameter of a quarter and 3/4" high. That became possible only thru new technologies in the process of creating surface area thru porosity. Again, dont take my comments for gospel.
supercapacitors use more than just normal capacitance; specifically they use double layer capacitance, pseudocapacitance, or both if i understand what I've been reading and listening to correctly. I don't remember what double layer capacitance is but iirc pseudocapacitance is when ions from the electrolyte are attracted to the charged plate of a supercapacitor and help give additional capacitance beyond what a true capacitor would have.
Thank you for your very interesting video. There is one point i don't understand and i hope you can explain. When the cap is finished and filled with electrolyte, why doesn't any charge built up in the copper foil just short out across the leads, which are emersed in the the electrolyte and, therefore are electrically connected. Thank you for helping to clarify.
Thank you. It’s about the working principle of the cap. As it is Double layer capacitor each electrode attracts the positive and negative ions of the electrolyte so they balance each other.
@@joyofelectronics9782 I have started gathering materials to experiment with. You are an inspiration. Thank you 🙏
@@tomwoods6828 you’re very welcome mate.👍
what is the length and width of the Cu foil?
What is Cooper foil?
Would you please tell the concentration of HCl and H2O2 in the cleaning solution?
It doesn’t matter
Hmmmm supercapacitor, supercapacitor... I have drinking game idea😂
Great video👍
Have you tested how many charge-discharge cycles it can go through before it starts to breakdown? (Discounting any breakdown time of the paper.)
I am still using the supercap and it’s still working. (More than 1000 times charge and discharge for now)
@@joyofelectronics9782 very cool and quite inspiring. Thank you.
how u charge it sir?@@joyofelectronics9782
hi, asking the same question here: So this capacitor scaled up 100 or 1000 times can give me few hour backup and act as a battery?
Have u tested its self discharge rate?
Yes it can. You can use several of them as a battery
@@joyofelectronics9782 there are many types of activated carbons available on Alibaba, some are in (granular) pallet form for water filtering, others are used for skin care products etc... And if I search for battery grade activated carbon that becomes very expensive. any solution to source high quality activated carbon?
That is NOT a "supercapacitor", that is an electrolytic cell, furthermore once applied the electric current it produce hydrogen gas and the copper foil oxidize.
To make a real supercapacitor you need a NOT aqueous polar liquid, like for example pure acetonitrile, and seal very well the plastic tube.
You are mistaken my friend there are both aqueous and non aqueous type of Supercapacitor. If you apply max 1.4 volt to charge this Supercapacitor there won’t be any electrolysis so hydrogen gas won’t produced.
It is an aqueous elecrochemical capacitor, which is a form of supercap, not a battery.
I think this is meant to be a electrical doublelayer cap EDLC after Zhang, Candeleria et al 2013. Which is more a psuedocapacitor than supercaoacitor. ion dffusion galvanic than is electrostatic.
Ok so people will be making their own replacement EV batteries instead of paying out $30,000
I've just tried to make surface material in proportions said in video, but it is only wet powder, not even close to liquid, 🤔 it seems like it's impossible to make this liquid with such small amount of water, what to do, or, is something that I made wrong? active carbon and graphite were very fine powders and i used deionized water, not added the glue yet
Brother you can add some more water until it becomes in the form you want and you must add glue otherwise when the paste dry it will be just powder again. Do what l said you will be successful 👍
Thank you for advice 😊
very good job,If I use coffee filter as paper will it be better?
There won’t be any significant change
I have try pvac white glue WR x crosslink , which the ads say it water resistant, but after i soak in water it start to weaken and i test resistance , the resiatance increase significantly
Use regular pva (white glue). Additionally the correct ratio is important
@@joyofelectronics9782 how can regular white glue is water resistant ? Do you using spevial hardener ?
@@teknosql4740 when it dry it becomes water resistant. You don’t need any additive
Use aluminium foils then paper and then the paste and caustic soda you would have made a far efficient and powerful aluminium air battery!!
I know that my friend. I have a video about making Al-air battery on my channel. But here l am making a Supercapacitor not an al-air battery bro👍
The thing that changed the top voltage is the thickness of the paper between the plates right?
@@politicalveganno
@@politicalveganit's the use of water, voltages much higher will begin to break it up into hydrogen and oxygen, further reactions to follow
Acaba neden bu kanala denk gelmemişim, benim kaybım olmuş. çok güzel bir anlatım tebrik ediyorum. özellikle çay bardağını gördükten sonra ingilizce yazmaktan vazgeçtim :D sormak istediğim tek bir nokta var hocam, sonicator olarak bahsettiğin şey ultrasonik temizleyici benzeri bir cihaz sanırım. bu cihaz işlem esnasında sonik titreşimler haricinde aynı zamanda ısı da uyguluyor mu? (elimde ultrasonik temizleyici var ama senin bahsettiğin farklı bir cihaz ise çalışma frekansı ve varsa, uygulama ısıl aralığını bilirsem yapabilirim) alanım elektronik, kimya konusunda biraz kötü sayılırım :D bu yüzden belki sana saçma gelecek birkaç sorum olacak.
1- grafit karışıma eklediğin tahta tutkalının yüzey kaplamasını kolaylaştırmasını amaçladığını düşünüyorum. doğru mu?
2- sodyum hidroksit eklendiğinde, bakır üzerindeki grafit boyayı zamanla çözmeyecek mi?
3- kağıt materyal'in kullanılması kasıtlı mı? yani çözeltiyi emmesi gerekiyor mu?
Merhaba kardeşim. Tutkalın görevi malzemenin bakır folyoya yapışmasını sağlamak. Aksi halde kuruyunca dökülür. Kağıdın amacı kısa devreyi engellemek ama naylon filan olmaz çünkü elektrolit akışına izin verecek gözenekli bir şey olmalı. Sodyum hidroksitin grafik üzerinde çok fazla bir etkisi yok.
Стеклоткань вместо бумаги и засунуть в термоусадочную трубку, предварительно обмазать клеейм. Потом залить электролит и спрятать в пластмассовую гильзу... Будет простенький суперконденсатор, на напряжение1,2 в. маловато конечно. Но позолоченную фольгу на такие безделушки пускать дорого, а как ещё повысить немного напряжение я не знаю.
Better to use ph meter to find perfect electrolytes. And use distilled water
🙏👊 great video, now ofcourse its all about surface area ,BUT, if given only one option , would you rather make your supercap in the wider (more turns) or longer (same diameter but longer length) to increase capacitence,,, are the effects even the same 🤔
Yes it doesn’t matter. It’s all about your choice. I like wider ones but it’s little bit difficult to roll😀
@@joyofelectronics9782 👊👍
Please reply me. I am looking for sodium sulfate in my country and there is no such ingredient. Are there some alternatives that I can find?
It depends, but if you use copper foil as current collector, then you can use sodium hydroxide, magnesium sulfate also.
Friend, what is the maximum voltage that this capacitor can withstand?
1.4 volts bro. Higher voltages start electrolysis.
How did you determine that 1.2 volts was the max voltage of this capacitor?
The electrolyte used in capacitor determines the max operating voltage. For aqueous electrolyte it’s 1.2 volts
@@joyofelectronics9782 That is very interesting. How did you determine this? Could you provide me with any documentation/ literature that states this?
bravo çok güzel olmuş. kağıt olarak kağıt havlulardan kullanmak acaba elektrolitiğin daha hızlı bir şekilde emilmesine sebep olmaz mı? kanalına üye oldum bir tane de ben süper kapasitör yapmayı planlıyorum. başarıların devamını dilerim.
Sağol kardeşim. Kâğıt havlu evet doğru elektroliti daha hızlı emer ama o daha az dayanıklı kısa devre yapma ihtimali yüksek. Bir de plakalar arasındaki mesafe uzuyor daha kalın olacağı için o yüzden onu tercih etme derim ben denedim daha kötü sonuç veriyor 😉
hello sir, do u have journal or research article about this supercapacitor. i wanna study more about this. please share if u dont mind. thanks
No l don’t have brother
@@joyofelectronics9782 can i know what size the plastic tube for supercapacitor u use?. can i use glass tube and with different size?
I think you just ultrasonic cleaned my ears. 😵💫
😂😂😂
My friend, I am trying to find the capacitance of my super capacitor but I can't get a power source, you mentioned that it can also be found by discharging it, for that I would need a resistor?
You need a resistor or a suitable power source or you can use a LED or a dc motor which you know it’s power.
@@joyofelectronics9782 Perfect, I was thinking of using the formula t/(R*ln(2)), is that correct?
@@adrianretamozo4936 l am not sure but l guess this formula is for electrolytic capacitors.
@@adrianretamozo4936this formula applies for electrolytic capacitors and super capacitors as well. It's general for capacitors which way of working is the same.
You can use a shunt resistor and an amp meter to measure the total charge stored by your capacitor. Or use a volt meter and ohm's law, but what you need to calculate is the current over time. Charge (coulombs) is the area under the curve, or the integral, of current. amps * seconds = coulombs. So measure amps every (dt) seconds until fully discharged, add those values together, and multiply by (dt). Smaller dt will give you more accurate results. Divide coulombs by volts at full charge, that's farads.
P.S. It's easier the way he did it because he has a constant current charger. So all he had to do was multiply current * time / voltage
Friend can you share the materials you added to prepare carbon coat. I was unable to get the information clearly.👍
No problem brother. 10% graphite powder 90% activated carbon. Add white glue with same amount of graphite powder by weight. And necessary dionized water. Stir the mixture very well
@@joyofelectronics9782
Thank you 👍
Can i use salt plus water instead of naoh?
No
When your making this capacitor How will you know what the voltage will be,How will you know if it's 400 -600 volts, or 200 volts. That's what i need to know
The electrolyte that you used determine the operating voltage. The operating voltage of all of the aqueous based electrolyte is 1.2 volts. When it comes to capacity. We calculate according the duration of the time.
Cara ionisasi itu menggunakan apa?
Abi kupır foil ne ya bakıra karşı fobi oluşturdun bende
Telaffuz hatası kardeşim 😀kapır foil olmalı
I have another question, if I left the battery for 1-2 days soaked in the electrolyte, can I charge the battery more than 1.2V? If yes, what is the maximum voltage at which I can charge the battery?
No, it won’t change. But if you add some iron oxide to the active material. The operation voltage will increase to 1.6 volts.
@@joyofelectronics9782 thank you. When I do something like this can I change the active material?
Here's a good one to try.... Using polyurethane make 2 different mixtures one containing graphite and one conductive aluminium powder(the finer the better). Then with the mixtures make 2 conductive strips one from the graphite one from the aluminium and when they are dry tape a wire to each one... Then add the separator and electrolyte(do not over saturated) and roll it up the same... The rubber conductors are already polarised so it should give off a pre charged current with uptona 1.2v potential and a considerable amount of amps... The idea of this is to make less or virtually non corrosive conductors which means stronger electrolytes can be used... Iv found ash especially cigarette ash to be a great electrolyte with less corrosion rate than sodium chloride, blood too is unbelievable stuff and you might be surprised to hear that tests with semen have proved to be quite shocking... Blood will still corrode but at a very very slow rate, while other bodily fluids don't seem to cause any corrosion,
Thank you ....I have a hard time hearing. Could you text out the ingredients used and what proportion they are used in mixing the black past.
It’s written in a comment answer. Please check it out.
My friend, what formula did you use to find the capacitance?
There two basic way to find the capacitance. First one is discharge method and the second one is charging method. I used charging method. The formula l used: l/C = V (per second). So if you charge the 1.2 volts capacitor with 1 amp and let say it take 120 seconds. At that time we can say that the capacitance is 100 Farad👍
@@joyofelectronics9782 Great! Thanks for the reply and your excellent work 😄
... the internal resistance converts some power to heat....
@@urvhalt All power is converted to heat. The question is whether you can do some useful work in the process, like spinning a motor, or forcing electrons against a gradient to a higher potential, i.e. charging. Heat doesn't make electrons leave the system, unless you're building a thermionic emitter like a CRT or something.
@@DFPercushThe charging process is not 100% efficient, thus some energy will be lost, leading to an incorrect capacity estimation.
Amazing video, could you please tell me the amount of deionized water and NaOH used in making electrolyte(like how much ml of water and how much gm of NaOH?)
1 molar is the best bro.
why is it limited to only 1.4 or 1.2 volts??? is it possible to make 5volt ones?
Also, this is super cool stuff. right up my alley.
Due to electrolyte. Aqueous electrolytes are limited to the range between 1.2 and 1.4
howmeny curent?!
Max 5 amps
What are the other electrolytes which can be used because once I cut open a super capacitor I got smell of nail polish remover lol 😆
There are two types of electrolyte 1. Water based 2. Organic electrolytes. In professional Supercapacitors mostly the second one is used. That’s why you got that smell 😉
Any issues with using this technique to make a HV (10-40kV) Supercapacitor?
Insulation will be the biggest problem
@@martinmtawali7359 mylar should be fine.
Both the insulation & the electrolyte limit the max voltage
Brother making a Supercapacitor like this is completely different from making a hv capacitor. There is a video about making hv capacitor on my channel. Please have a look at that.
Here is the link of the video: ruclips.net/video/IyV58X7x0WM/видео.html
Hello, don't you use a separator ? it seems to be important
Thank you for your information. Well done, the components of the battery
Thanks but it’s not a battery ☺️
@@joyofelectronics9782 What is the duration of the acid?
what is the keyword for buying online the plastic container?
Dude, what happens if I leave the supercapacitor with the electrolyte at a low level for a long time? Could it be ruined and I would have to build a new one?
Let me explain dude. Normally pure sodium hydroxide is corrosive and aggressive to copper but very friendly when up to 60 percent ratio solution in water. So when the level of electrolyte decreases some pure sodium hydroxide will remain on the electrodes and it will start a chemical reaction and it will cause self discharge and ruin your Supercapacitor overtime. That’s the main reason. I hope this helped.
i made it the same way bt not working, discharging really fast , what to do
Your active material must stick to the copper foils well and purity of the materials actually the electrolyte is play an important role. Practice more times you will get better results.
@@joyofelectronics9782 could i have your email id
dostum hibrit süper kapasitör için elektrolit olarak sodyum sülfatda kullanabilirsin
Evet ama sodyum sülfat kullandığında yapıştırıcı olarak tutkal kullanmazsın ona uygun bir binder kullanman gerekir. Çünkü onu da denedim. 7 8 yıldır bu konu üzerine çalışıyorum yüzlerce deneme yaptım.
@@joyofelectronics9782 en fazla verimi hangi sistemde yakalayabildiniz?
@@ozgurkaygisiz1562videodaki sistemde. Geliştirmeye devam ediyorum tabiki
@@joyofelectronics9782 dostum dün paylaştığın iletken boya son derece basit bir yapısı vardı bu ve buna benzer sistemlerde kullanılabilirmi?
Sevgili dostum, RUclips daki okadar fazla yanıltıcı sahte videolar izledikten sonra senin videondan etkilendim. Bu konuyu çok araştırıyorum. Henüz ikna olana kadar denemek istemedim.Taki senin videona kadar. Bu kez deniycem. Ancak bir sorum olacak. Elektrotlardan biri bakır diğeri alüminyum olan ,hatta ikisi de alüminyum olan kapasitörler gördüm. Sence her ikisi de bakır mı olmalı yoksa ikiside alüminyum mu olmalı yoksa senin yaptığın daha mı doğru. Bu konuda bilgini rica ediyorum. Son olarak elektrotlara sürdüğünüz aktif maddenin (aktif karbon,grafit ve beyaz tutkal) karışım oranları nedir. şimdiden teşekkürlerimi sunuyorum. Hayırlı çalışmalar. saygılarımla.
Merhaba sevgili kardeşim güzel yorumun için teşekkür ederim. Elektrotlar bakır veya aleminyum olabilir hatta başka metalde olabilir. Burda belirleyici olan şey kullanacağımız elektrolit. Ben sodyum hidroksit çözeltisi kullandığım için bakırı seçtim. Çünkü sodyum hidroksit aleminyumu hemen eritir, onla reaksiyona giriyor. Birde şı çok önemli; iki elektrotta mutlaka aynı metalden olmalı. Diğer soruna gelirsek kardeşim. Aktif maddenin oranları şu şekilde olursa en iyi sonucu alırsın: 10 gram aktif Carbon, 1 gram ince grafik tozu, 1 gram beyaz tutkal, bunları 12 gram suda iyice karıştırıyoruz. Son olaraka süperkapasitörler konusunda on yıldan fazladır araştırma ve çalışma yapan biri olarak şunu söylemeliyim. Gerçekten çok fazla parametre ve ince detay var. Tam olarak videodakiyle bire bir yapmanızı tavsiye ediyorum. O zaman başarı oranı yüzde yüz.
@@joyofelectronics9782 Cevap verme nezaketiniz için ve tatmin edici bilgileriniz için ayrıca minnettarım. Başarılarınızın devamını dilerim. İzlemede kalacağım.
@@yusufbalaban733 rica ederim kardeşim her zaman. Kendine iyi bak.
Hello @joyofelectronics9782 , can you please tell me how much current this thing can output? I want to make a diy spot welder and I need high current for that. I was wondering how many of these cells should I make to make this work :)
Hello. It can give max 3 amp. But with this supercap you can’t make a welder machine. You had better to use a high current transformer. But if you say l want to do with this Supercap anyway you must use at least five of them in parallel or make one five times bigger than this one.
@@joyofelectronics9782 Thank you for the quick answer, it was helpful!
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻🌹🌹🌹🌹👏👏👏👏
Hello brother,
I don't have this charging device.
Is there any alternative device that i can used to charge my supercapacitor?
Please reply
You can use simple circuit with AA battery to charge it.
Thankx bro
this thing is able to contain about 200 joules of energy. Good. The formula for energy: E = (C*(U^2))/2. Interesting if it's possible to charge that thing up to 12 V. It will be 14,4 kJ of energy.
👍
Good job bro 😁 can we change copper foil with aluminium foil ?
If you’re going to use sodium hydroxide as the electrolyte you can’t use aluminum foil. But if you use sodium sulfate then you can use aluminum. But at this time you should use a special binder instead of white glue.
thank you so much@@joyofelectronics9782
Internal resistance?
Approximately 10 miliohm (0.01 ohm)
@@joyofelectronics9782 good thing you didnt short them leads... with 200F behind...
Camical name
Next time,just apply the graphene in a circular manner,so that when the electrodes enter the system,it flows from the bottom up in a circular pattern