Soldering a Wi-Fi antenna wire to the Bluetooth antenna on your module might not significantly increase the range and could potentially harm the module’s performance. Here’s why: 1. Bluetooth and Wi-Fi Frequency Differences: Bluetooth typically operates in the 2.4 GHz band, similar to some Wi-Fi frequencies, but the antenna designs are optimized for their specific protocols. Simply attaching a Wi-Fi antenna to a Bluetooth antenna point may not provide the desired results due to mismatched impedance and design. 2. Antenna Tuning: Bluetooth antennas are specifically tuned for the module’s power output and frequency. Adding a larger or mismatched antenna might introduce signal loss or interference, reducing range instead of increasing it. 3. Bluetooth Transmit Power Limits: Bluetooth has power output limits defined by the standard (Class 2: 2.5 mW, Class 1: 100 mW). The antenna alone won’t overcome these limits, as the range also depends on the module’s power and sensitivity. To Properly Increase Range: 1. Use a High-Gain Bluetooth Antenna: If the module has an external antenna connector (e.g., an IPEX or SMA connector), use a high-gain antenna designed for Bluetooth frequencies. 2. Use a Bluetooth Range Extender: Install a Bluetooth repeater or range extender to amplify and relay the signal. 3. Ensure Proper Antenna Placement: For built-in antennas, position the module in an open area away from metal objects or enclosures that could block the signal. 4. Upgrade to a Class 1 Module: If you’re using a Class 2 or 3 module, consider upgrading to a Class 1 Bluetooth module, which has a longer range by design. If you’re set on experimenting, proceed cautiously, as improper soldering or mismatched antennas could damage the module or reduce its performance.
Bro i think you Didn't understand! I'm not using wifi antenna circuit! I'm just using antenna! If you check inside the antenna then you'll see there's a copper coil rounded and in my blutooth module there's a little copper wired on pcb so if I attached antenna there it will definitely increase the range, i understand what are you talking about! You saying from google that blutooth and WIFi there have different frequency range! If you run theme same time it will interfere each other and They will broke both signal wifi and blutooth! And it will damage the wifi and Bluetooth board! So I hope you understand! 😊 Thanks bro I'm impressed with your question- ( sabse aacha comment aap ne kiya hai mere pure channel pr !)🤞👌☺️
@@ELECRAFT_ thank you bro but impedance mismatching is also issue. The module’s RF output is likely designed for a 50-ohm impedance. If the external antenna and cable are not properly matched, it can cause signal reflections, reducing performance.
12ka power supply use Kiya hu! Fm kam kerta hai bus eek antenna ki jarurat hai ! Or mere place mai 80 ₹ mai purchase Kiya hu online (makerbazar) se aap ko mil jaye ga 150₹ mai !
Time bachane ke liya ! Connection nahi dikhaya! Or range nahi dikha sekta mai jaha rahta hu waha mai nahi ker sekta ! Pr mai ne Check Kiya hai ! 25 meter! Tak kam kiya ! But mai jarur next time se dhayan dunga ! Thanks for reply 😊
❤ very ❤ nice ❤
This is something out of the box
Nice dude! keep it up❤
Thanks bro 😁!
Very very nice bro❤❤❤❤
🎉v good job keep it up
Thank you 😊
@ELECRAFT_ wlcm bro
Nice 👍👍👍
जानकारी अच्छी है, क्या इस अपडेट के तरह किसी भी ब्लूटूथ में रिमोट लगा सकते हैं यदि हां तो कहाँ कनेक्शन करना है इस पर जानकारी दे तो बेहतर हो••• धन्यवाद
Remote blutooth panal ke sath milta hai ! To aap koi bhi blutooth mai koi bhi remote nahi laga sekte !
Thanks. 🎉
☺️🫡
Soldering a Wi-Fi antenna wire to the Bluetooth antenna on your module might not significantly increase the range and could potentially harm the module’s performance. Here’s why:
1. Bluetooth and Wi-Fi Frequency Differences: Bluetooth typically operates in the 2.4 GHz band, similar to some Wi-Fi frequencies, but the antenna designs are optimized for their specific protocols. Simply attaching a Wi-Fi antenna to a Bluetooth antenna point may not provide the desired results due to mismatched impedance and design.
2. Antenna Tuning: Bluetooth antennas are specifically tuned for the module’s power output and frequency. Adding a larger or mismatched antenna might introduce signal loss or interference, reducing range instead of increasing it.
3. Bluetooth Transmit Power Limits: Bluetooth has power output limits defined by the standard (Class 2: 2.5 mW, Class 1: 100 mW). The antenna alone won’t overcome these limits, as the range also depends on the module’s power and sensitivity.
To Properly Increase Range:
1. Use a High-Gain Bluetooth Antenna: If the module has an external antenna connector (e.g., an IPEX or SMA connector), use a high-gain antenna designed for Bluetooth frequencies.
2. Use a Bluetooth Range Extender: Install a Bluetooth repeater or range extender to amplify and relay the signal.
3. Ensure Proper Antenna Placement: For built-in antennas, position the module in an open area away from metal objects or enclosures that could block the signal.
4. Upgrade to a Class 1 Module: If you’re using a Class 2 or 3 module, consider upgrading to a Class 1 Bluetooth module, which has a longer range by design.
If you’re set on experimenting, proceed cautiously, as improper soldering or mismatched antennas could damage the module or reduce its performance.
Bro i think you Didn't understand! I'm not using wifi antenna circuit! I'm just using antenna! If you check inside the antenna then you'll see there's a copper coil rounded and in my blutooth module there's a little copper wired on pcb so if I attached antenna there it will definitely increase the range, i understand what are you talking about! You saying from google that blutooth and WIFi there have different frequency range! If you run theme same time it will interfere each other and They will broke both signal wifi and blutooth! And it will damage the wifi and Bluetooth board! So I hope you understand! 😊 Thanks bro I'm impressed with your question- ( sabse aacha comment aap ne kiya hai mere pure channel pr !)🤞👌☺️
@@ELECRAFT_ thank you bro but impedance mismatching is also issue. The module’s RF output is likely designed for a 50-ohm impedance. If the external antenna and cable are not properly matched, it can cause signal reflections, reducing performance.
Home theatre kit ko bhi modify kro bro please
Thanks for 19 subscribers❤😢
Very nice bro
Jo suruat me ye Bluetooth mode bolti hai isko off kar sakte he kya?
Nahi bhai wo program Kiya hua hai ! Wo to nahi hoga !
@ELECRAFT_ Thank you.
bridge diode lagana bhul gaye sir
Yes but it's ok!
Very good bro
Thank you 😊
The ic used is copy in this local BT module
Yes bro! What you expect in 80₹?
@@ELECRAFT_ add 70 more and can buy pagarhia
link plz
Bhai ofline Market se purchase Kiya hai ! Pr aap online makerbazar se purchase ker sekte ho 150₹mai !
12 volt kahase mila ? Power bank or 12 volt adapter se? FM KAISE CHALTA? SHOP ME RS 150 LETA. On line me Rs 230 leta.
12ka power supply use Kiya hu! Fm kam kerta hai bus eek antenna ki jarurat hai ! Or mere place mai 80 ₹ mai purchase Kiya hu online (makerbazar) se aap ko mil jaye ga 150₹ mai !
@@ELECRAFT_ OMG. turant reply. I am very much impressed.
@@RameshPal-cd4cs I'm sorry! agali bar se dhayan dunga ki other youtuber ki trh reply hi na du !😅😂
Abe yaar us light ka review karo jo maine photo bheja tha❤❤
Bro useee purchase kerna pade ga mere pas hai nahi !
Bhai apne amplifier ke connection to dekhaye he nhi😂😂😂😂
Na he bt ke Rang dekhaye pahle kitne thi ab kitne h
Time bachane ke liya ! Connection nahi dikhaya! Or range nahi dikha sekta mai jaha rahta hu waha mai nahi ker sekta ! Pr mai ne Check Kiya hai ! 25 meter! Tak kam kiya ! But mai jarur next time se dhayan dunga ! Thanks for reply 😊