Hello. i have one question to you. What should be the width of connectors for metal ceramic and zirconium crowns in the EXOcad. thanks you for your help
Hello, the material configuration affects the choice of materials and the respective parameters (e.g. minimum and connector thickness). You can choose a locally stored configuration, a configuration from one of exocad's material partners via dentalshare or a configuration from one of your dentalshare contacts (recommended if you wish to send out files for production). for more information please visit our exowiki page: wiki.exocad.com/wiki/index.php/DentalCAD_Documentation_-_Index_of_topics#dentalshare
Hi @Mostafa Mansouri, this is a perfect example of why creating a "Virtual Waxup" helps solving difficult cases. One solution could be the following: First you select one "mockup" as indication and setup your design. Second you reassign the indication to waxup on both abutments and restart the design to use the virtual waxup to finally adapt this one design to both margin lines.
Наука
E học khóa PHR19 ạ các video của a rất hữu ích, cảm ơn a rất nhiều và mong anh sẽ ra nhiều video nữa ạ !!
Best regards to you!
Cảm ơn bạn - chúc may mắn! 🙂
Why does my implant library have only one type of 3dBiotech?
How can I add to the library?
Hello, how can I design the abutments and the supraestructures in a single CAD session?
Excelente video
Es posible este webinar en español sin subtitulos?
Hello. i have one question to you. What should be the width of connectors for metal ceramic and zirconium crowns in the EXOcad. thanks you for your help
Hello, the material configuration affects the choice of materials and the respective parameters (e.g. minimum and connector thickness). You can choose a locally stored configuration, a configuration from one of exocad's material partners via dentalshare or a configuration from one of your dentalshare contacts (recommended if you wish to send out files for production). for more information please visit our exowiki page: wiki.exocad.com/wiki/index.php/DentalCAD_Documentation_-_Index_of_topics#dentalshare
more usefully thanks
Thanks Michael Kohnen and Uta for great instruction video!
유튭에서보니 반갑네요 김정기 소장님ㅋㅋ
Excellent
hello
how can i design one crown by two customize abutment?
thank you
Hi @Mostafa Mansouri,
this is a perfect example of why creating a "Virtual Waxup" helps solving difficult cases.
One solution could be the following: First you select one "mockup" as indication and setup your design.
Second you reassign the indication to waxup on both abutments and restart the design to use the virtual waxup to finally adapt this one design to both margin lines.
Thank u
How are you guys?
how can we design custom abutment with scrp crown at a same time
13:00
Hello
We hope that the video supports Arabic language
not so far, and currently we are not planning Arabic language. But we are open for translation offers.
Всё элементарно переводится с английского...)
East Europe language(subtitre):Russian,Ukraine,Poland.
Excellent
Thank u