5 Quick Cable Management Tips | Tech Tuesday
HTML-код
- Опубликовано: 15 окт 2024
- The cables on your bike do so much! They brake, and shift and make your seat post go up and down. So you should be sure to treat those cables right. In this video, we've got 5 quick tips to help you manage your cables.
➤ Fix It:
Did you know that Park Tool is the #1 resource for bicycle repair education?
• Visit our RUclips Channel: / parktool
• Visit the Repair Help section of Parktool.com: www.parktool.c...
• Check out The Big Blue Book of Bicycle Repair: www.parktool.c...
➤ About Park Tool:
Since our founding in 1963, Park Tool has been the leading name in bicycle tools. Our RUclips channel is an extension of our mission to be the ultimate resource for mechanics and riders of all skill levels. Here you will find comprehensive repair help tutorials for a wide range of components and processes, as well as troubleshooting guides, tips and tricks, and information on the latest Park Tool products.
➤ Subscribe: www.youtube.co...
➤ Like: / parktool
➤ Follow: / parktoolblue
This is good if you have only a pile of zip ties. If you have extra shift housing caps and a sharp knife, cut the cable exit end off and thread the zip tie through that eliminates a zip tie "spacer" and head and looks quite a bit cleaner. Also, do some dry runs with the zip ties threaded through the head upside down so you can visualize where you want the unsightly head to be so you don't put it all together and wish you'd done it the other direction.
I use the S-hooks from Jagwire. They also have some nice rubber things to prevent the cables from rubbing on the paint. I also use some Jagwire Elite Links for my rear brake cable, otherwise the cable would be cut all the time in the frame's internal routing hole.
Have you seen the heat shrink fabric? More flexible than traditional heat shrink tubing, more abrasion resistant, and won't trap water like the solid stuff either. And most importantly, it looks sweet. It's not too expensive, but I could only find it from a specialty online supplier like McMaster.
Patches advise really worked!! Thanks
Never thought about using a patch to protect my frame. Genius
I bought a bunch of these rubbery spiral doodads that I can put on the cable housing where it strikes the frame, keeping the housing away from the frame. Cheap and they work well.
I've found silicon tape a better solution than heat shrink because you can just wrap it on like tape
It's often sold as chain stay or frame protection tape, no adhesive but sticks to itself really well.
Does it shrink under heat and look nice and clean? Or do you use it more like electrical tape and just wrap it around?
It sticks to itself, but not other things. Once it sticks to itself, you cannot get it apart.
Removing those are a pain in the butt specially if you stick it to rubbery material
Self-fusing silicone tape is really great. I have some F4 tape (red with blue stripe) and some XFasten tape (clear). Both F4 and XFasten are available in black as well. It's quite stretchy so you can wrap it tighter if you want. Once it fuses to itself it will not unravel. There is no adhesive on the tape, the silicone rubber literally fuses to itself (so handle it with care or it may stick where you didn't intend it to). If you need to remove the tape, carefully make a small incision at one end with a sharp knife, then pull it apart. As silicone rubber is not particularly strong, you will be able to just rip it (much easier than with electrical tape).
Learned a Lot, Thanks 👍👍👍
How much slack should you have in the front of the bike for brake lines? I'm routing new brake lines as I have a new handlebars. Is it just enough for handle bars to have free movement?
This varies depending a bit on preference but typically you want to be ablt to turn drop bar bike 90 degrees in both directions without pulling the housing. On flat bars some people go for 90 degrees of freedom but sometimes you want 180 degrees of free movement. The more likely you are to crash the more you want to be able to rotate without damaging the cable or housing.
Black small tape around cables works great too
thanks! any tips for integrated cables/hydro conduits? 😅
All great tips. Have you seen discolouration in the clear frame protectors? In the old frame sticker kits the tape would turn yellow. Bike frame would possibly look better with scratches.
Going full SRAM AXS with both the dropper and derailleur has been the best cable management solution I’ve encountered 😉
Hopefully the servo will be strong enough if your mountain biking, with the chain slap issue nobody’s talking about. Cheers!
yeah, definitely better value for money than adjusting your cable/housing length or buying some zipties
Hilarious. 10 years ago, I felt like a lunatic putting some automotive paint protection film on the rub areas of my bike. Apparently I’m not alone 😎
There are companies that do custom cut protective film now, as well as companies that do the custom cut film with graphics on them. It's a wild world!
That Bianchi! 😍 wow
Great tips
Me encantan las soluciones caseras apañadas! Gracias 👏🏼
Hey Truman! Like your fresh haircut! 😅
Hey, thanks!
@@parktool you’re welcome! Looks nice!
I never thought of using the zip tie as a spacer. I'm sure everybody else is way ahead of me on this, but I'm old and inflexible.
Me neither, a simple but very neat idea. Gonna try to remember this :)
Really make sure that the frame is very clean before putting on any frame tape, helicopter tape or a patch.
The cables on my bike are obstructing the light, so im watching this video to get some ideas. I think my cables are slightly long, so I can either shorten them or use a zip tie to keep them out of the way. Im gonna try zip tie first and see how it goes.
I use one zip tie to keep all my cables nice and neat
I don't know what they're called but it's this "spiral" plastic that you wrap around the cables near the handle bars. The spiral plastic holds multiple cables together for a clean look to the frame. Just make sure the cables are similar lengths so you can bring them together.
This is usually referred to as "wire loom". I've seen it as a spiral wound plastic as well as a plastic mesh. I like the plastic mesh a little better because it uses a slot to insert / remove the cable, so it's a touch easier to add/remove cables.
I actually bought several meters of that for office cable management and ended up trying it on my bike. It actually looks pretty clean. Not as clean as heat shrink, but not nearly as troublesome to install and maintain.
Spiral cable wrap. But on a mountain bike it will likely trap dirt and mud.
for no 4, i just use regular stationaries clear tape (few layers) very cheap and durable too.
Random tip, after you cut the zipties heat the ends with a lighter. It makes it harder for you to cut yourself or ties to come loose!
I will get a 5mm length of silicone hose, thread a cable tie through, around a brake hose or cable then tread back through the silicone hose. You can now wrap the tie around the bike frame. This will secure the cable or brake hose but not crush it or deform it by the cable tie as the silicone prevents this
Spiral Cable Wrap.
On just about any frame with an under-BB cable guide, the best way to protect the paint on the head tube is to route the rear shifter to the left cable stop, the front shifter to the right cable stop, and cross the cables below the downtube. While it may be theoretically possible that the cable stops could be positioned to cause the cables to rub the paint, I have yet to run into that on one of my real-world bikes. This routing naturally keeps the housing away from the head tube, so there's never any paint rub.
The bike in video uses that type of routing and still contacts the frame. The only housing that is routed to the same side the lever is on is the dropper post. That was a design flaw IMO. But yes! Crossing typically solves many issues and we do chat about this in our cable and housing install videos.
Cool.
mans lost some weight. Looking good dude!!
S clips and zip ties are great also on bicycles without internal cabling. Zip tie the cables on the frame aince you don't have internal cables. Brake cables need to be ziptied I guess
For 3.2, making one ziptie as a figure 8 yields same result in a much cleaner view
Magnifique ✌️🙂
I use Rapstraps. There's no plastic waste and you can use the whole thing...
the edges of those zipties functioning as spacers look like they would cut through the hoses much faster than if you had not tried to "remedy" with zipties in the first place... :)
Speaking from experience? Cable ties edges are pretty smooth in my opinion, it's not a sharp 90 degree corner. But the cut end can be pretty sharp, I use a diamond file or some sandpaper on these wherever relevant.
That is a Sweet Ass Single Speed
I bought those S-hooks(Jagwire) and they are complete shit. You have to constantly rearrange them because they move, and they do hardly nothing to actual rattling noises. The last thing is they for some reason cost about what you'd pay for genuine vanilla except one is just tiny niblets of plastic, and the other is actually useful.
Just tape the hoses together and problem solved.
You could have taken the opportunity to show how to use a fourth hand tool to tie the zipties.
Never cut zip tie tails. Always twist them off with pliers to avoid having a sharp edge and cutting yourself or snagging something in the future
Unless you have flush cutters like the ZP-5's used in this video.
nail clippers can cut zip tie ends flush.
Less wireless comments than expected. Interesting
Haha, that would be another way to clean up your cables for sure.
Truman rules
I use black electrical tape instead of the heat shrink. Keep everything looking clean. Now all I see is 2 cables instead of 4.
Nice! That is a great use.
Dafuq? Trickstuffs on that thing?? 😂😂
Specifying how to set handlebar angle for wrist comfort at the one minute mark would've been helpful.
Hi! This video is focused on Cable Management tips. We do have an entire playlist about handlebars, so maybe your answer is there: ruclips.net/p/PLGCTGpvdT04T_783SX3q7iiNI7RcQwul2
2:27 this is so obviously staged. In a real shop environment it would take at least 10 times that long to actually put a thing through a hole like that
Facts!
tip #6: get rid of your front derailleur xD
I came here to see cable management for PC and electrical lol
Gotcha!
Lots of cheese here
Ride a Trackbike. No Cables. Problem solved xD
This video: How to ghetto your bike with stupid zip ties. 😒
What a ton of BS😂, clipping opposing cables together, now try to steer with it
the cables flex
@@bmxscape and stretch)))
@@ivanrybkin9384 when brake cables bend the effective cable length inherently get slightly longer. shift cables will remain a constant length even if they bend. if your cables are binding during turning you should think about lengthening the cables
They steer fine Ivan :)
If it’s done correctly it works great Ivan. 20+ years working as a bike mechanic. If you don’t clip them correctly it could cause issues.