That is very average, most concreters in Oz I work with, are not the sharpest tool in the shed. He clearly got caught on that machine for maintenance. This is a hot climate so adding lots of water on the surface during troweling, is a given. This is Queensland, in Oz no air entrained admixture.
Looks like our indoor smooth concrete floor our contractor botched.
Looks like theres a huge learning curve moving to machine from hand troweling.
That is very average, most concreters in Oz I work with, are not the sharpest tool in the shed.
He clearly got caught on that machine for maintenance.
This is a hot climate so adding lots of water on the surface during troweling, is a given.
This is Queensland, in Oz no air entrained admixture.
Is that partially from a low spot where concrete ran to
How do you salvage that?
You can only salvage if the customer agrees to allow for a grinded floor, you have to remove the delamination
The blade pitting looked like slag from cutting the bolts above with oxy/acetylene torch. (The bolts were ground flush) 🫡
1 I'd would say this is not a Workman like Manor and or it didn't take care of his equipment or he's just too dumb to care😅