How to Replace the Front Struts, Springs, Tower Bushings and Plates on a Volvo 240
HTML-код
- Опубликовано: 1 окт 2024
- Support the Channel: / longbowmedia
HD Spring Plates: turbobricks.co...
How to Replace the Front Struts, Springs, Tower Bushings and Plates on a Volvo 240
Photos of the strut spacers provided by: www.240turbo.c...
Plates featured in video: forums.turbobri...
More Tutorials: • TUTORIALS
www.longbowmedia.us
Finallly, someone made a detailed video on this procedure. Thank you so much!
I came here to say exactly this.
Great video, well detailed and quick. Thank you!
I wanted to take a moment to thank you for this video. After using a different DIY on the driver's side, and absolutely struggling, I found this. I finished the passenger side strut in a fraction of the time and had a good approach on how to loosen the gland nut. Just a total game changer. Thank you so much for this!
Glad to be of help!
I just did this job and your video was an indispensable resource! The new gland nut that came with my strut cartridge was taller than the one that was in my car. It wouldn't go completely flush so a few threads were visible. My Volvo mechanic friend said it would be ok and to use blue loctite.
Just my observance. I hope it helps someone..
long live volvo 240!
Thanks for all your detailed videos! They’ve been of great help in the past.
Though I ran into some trouble with this job. The procedure at 0:50 is impossible on my 1992 245 with abs. I can’t lower the strut far enough to clear the chassis. The ball joint simply won’t bend any further.
I ended up unbolting the balljoint bracket from the control arm.
Thanks for the heads-up, I didn't realize the ABS 240s would require an extra step.
Your videos are awesome. Thanks for all you do Longbow. :)
Fantastic video. Thank you.
ATTENTION
This is an excellent video worthy of Dave Barton his bad self, and you are to be commended. I hereby COMMEND you heartily.
As you were, maggots.
Excellent tutorial! Love the authenticity of the oil leaks.
Hi where can get/order oem front strut 240? im from malaysia.
this channel is truely a gift to the 240 community
Well done. While it’s not something I can do myself understanding the process is a big help. Many thanks.
yeah, sometimes its nice to see all the trouble you can get into when trying to DIY, so you feel better about paying someone else to do it
Thanks to your video i replaced my front struts last fall. I did my first test drive yesterday and realized im missing the thick washers under one of the strut nuts, very loud lol
super helpful, thank you!
Glad to be of help :-)
Excellent tutorial. I am replacing my springs and strut mounts again. Where did you get the 2 round metal plates you installed on top of the mount and underneath? I've searched the net high and low and can't find. Only GT plates that go on top. Thanks! Subscribed
Here are the plates featured in the video: forums.turbobricks.com/showthread.php?p=6252615#post6252615
How do you keep the top spring plate from spinning when you try to loosen the nut?
Without the Volvo special tools, which is a wrench and a counter-hold, the best solution I found was to use a good air impact gun in a series of "burps" to remove the nut.
@@LongbowMedia will a battery powered impact 1/2” drive work, or do I need more horsepower?
Great video but omg clean the stuff you're working on lol
The grease, oil and dirt keep the car from rotting away in the Winters 😉
Way too fast for a first timer to follow
I am putting in the billsteins touring
Good choice
Are monroe 5868 rear shocks the oem equivalent?
I'm not sure...anyone familiar with Monroe and OEM?
@@LongbowMedia Volvo OEM rear shocks were supplied usually by Sachs or Boge they were both oil or Gas shocks /Struts and your best value if your in North America is Rock Auto, if you want you can get the Bilstein B4 Touring Class shocks for the rear they do for sure stiffen up the ride , i had them and removed them for this reason and installed the standard shock, KYB also use to be a supplier to Volvo while 240's were being built and are a decent rear shock ,i am just getting ready to install KYB front struts on my 1989 240 DL , it still has the original ones in it, hope this helps, i did work for Volvo here in Canada back in the late 80's 👍
Where can I get that specialty socket for the strut
Do a search for:
"schwaben 003046SCH01A-05" or "Performance Tool W83015"
@@LongbowMediacan it be done without The Tool?
Would the bill Stein hd strut work with a 91 240?
Here's a great page with additional information: www.240turbo.com/suspension.html