Centrifugal Pump Repair & Troubleshooting

Поделиться
HTML-код
  • Опубликовано: 23 ноя 2024

Комментарии • 28

  • @Warbreaker83
    @Warbreaker83 5 лет назад +4

    15 year journeyman millwright here and this video was very helpful, thank you.

  • @condielangham4622
    @condielangham4622 2 года назад

    I appreciate greatly the work you put into this video.

  • @amathonn
    @amathonn 5 лет назад +3

    Just a homeowner here, but I could understand your presentation very well. Excellent job!

  • @suebsuebsue9409
    @suebsuebsue9409 2 года назад

    This is SUCH a good video! I learned so much!

  • @manjitsinghtiger
    @manjitsinghtiger 3 года назад

    One of the best videos I have ever seen. Very good information and very easy to understand.

    • @antonmursid3505
      @antonmursid3505 2 года назад

      Antonmursid🙏🙏🙏🙏🙏💝🇲🇨🇲🇨🇲🇨🇲🇨🇲🇨💝✌🙏🙌

  • @glenorie8530
    @glenorie8530 3 года назад

    Watching from Trinidad and Tobago

  • @jamesyager7374
    @jamesyager7374 4 года назад +1

    Great training session.

  • @stevejobless386
    @stevejobless386 5 лет назад +9

    My boss won't show me how to do it so here I am lol

    • @antonmursid3505
      @antonmursid3505 2 года назад

      Antonmursid🙏🙏🙏🙏🙏💝🇲🇨🇲🇨🇲🇨🇲🇨🇲🇨💝✌🙏🙌

  • @rashiqueellis5380
    @rashiqueellis5380 5 лет назад +1

    Thanks for sharing your info on troubleshooting I learnt a lot

  • @CrackerJayherber
    @CrackerJayherber 5 лет назад +1

    Thanks for doing this teaching it helps me as an apprentice motor technician

  • @OlokorIfeanyi
    @OlokorIfeanyi Год назад

    Very interesting video

  • @bobpospick1649
    @bobpospick1649 5 лет назад

    Good video. This should help me troubleshoot my SPJ20 pump.

  • @iamhonest9539
    @iamhonest9539 2 года назад

    I have this exact F&W pump, 2H, for my UG sprinklers. Date stamp 9809. I shut down the sprinklers and forgot to shut the breaker off for several hours. The motor is working but I can't get the pump to prime. Where can I get parts for this pump? Thank You, Sharon

  • @randyhatanpa4755
    @randyhatanpa4755 2 года назад

    What happens when the brass impeller comes apart in two pieces? Do you need to replace them or just nest the two halves in place on assembly?

  • @hezronskeete2903
    @hezronskeete2903 3 года назад

    Thank you very much

  • @walterski8377
    @walterski8377 4 года назад +1

    Doesn't seem that F&W is monitoring their video comments. But here goes since this is a troubleshooting video... I accidentally started a non self priming pump that wasn't primed yet for about 10 seconds it had a loud screeching sound. I quickly turned it off, primed it, started it again shaft was spinning but NO SUCTION or water coming out. Did I ruin the hydraulic side? What probably broke? What parts do I need to rebuild it?

  • @IPAsAndSunshine
    @IPAsAndSunshine 3 года назад

    I’m using an older f&w jet and having issues with it doing literally nothing when flipping the breaker. It’s wired properly, has power going to everything. Makes no click, pop, hum, buzz, or sizzle sounds. Just sounds like it’s getting no power past the control board. I tested the relay and replaced the capacitor and still
    Nothing. Is there a second compacitor in the bottom of the unit? Under the start cap and the control board there is a black plastic circle that looks to be hooked in with two bolts, is this the thermal overload? Is there a fuse here or is this replaceable? What are the chances this could malfunction or become damaged? If so is it something I can replace and if so why is so hard to find Info about it?

    • @flintandwalling
      @flintandwalling  3 года назад

      Hello!
      If you could provide us with an email address one of our team members can reach out to you and address your questions.
      Thank you!

    • @IPAsAndSunshine
      @IPAsAndSunshine 3 года назад

      @@flintandwalling awesome I never expected a reply! My email is mh321@icloud.com

  • @elvisthoughts3349
    @elvisthoughts3349 5 лет назад

    I need a new switch where and how to get one

  • @DeeInTheHouse
    @DeeInTheHouse 4 года назад

    Q: My well pump & motor are in the basement...the pump end has two pvc pipes...? why two? You example shows one inlet.

    • @richardnailhistorical3445
      @richardnailhistorical3445 4 года назад +1

      One of those pipes is for discharge & the other is for suction........they are used on deep wells (over 25'). The suction is 1 1/4" discharge is 1"

  • @razachicks2733
    @razachicks2733 4 года назад

    V thanks

  • @bwest9779
    @bwest9779 5 лет назад

    I mean everything was accurate but you showed me but that's not what I want I got two older type of I would jet pump up right I got two propellers on I took it off and there's two seconds I'm pretty sure I want to go to another area and another propellers was another bottom part or how are you going to say it but I need to know how that goes to do it it's not showing me that's not the right type of pump I'm looking for I want you to tell me something I got to stay right 1 horsepower one inch outline 1 inch inline the pump out the water tell you I got to order type of pump that I need to know exactly what it is how it goes together I already got it back together and I'm not getting no prime out of I don't know why I checked the line the bottom core pipes out and it was a hole in it I fix the hole but I can't still get your prime I appreciate if you could tell me something

  • @antonmursid3505
    @antonmursid3505 2 года назад

    Antonmursid🙏🙏🙏🙏🙏💝✌🇲🇨🇲🇨🇲🇨🇲🇨🇲🇨💝✌🙏🙌