Hey guys I have a ranger midsize crew 570 I was reading where some guys were saying that they have the same engines as do the razors I was wondering if it was possible to turbo a ranger with parts for a razor
@@SXSBlog I am very interested in getting a side-by-side don't know which one yet. I am into the mud racing with my Can-Am ATV done this for years I would really like to check out your guys's and find out the goods and the bads of what brand really liking the Honda Talon.
Classic case of seemed like a good idea at the time coming in the future. 😎 The best part of this video was the time lapse of Rick and Doug working hard and Leo siting in the chair playing angry birds and cruising FB Marketplace.
You guys really weren’t kidding this was gonna be a big year every time a project starts I’m thinking there’s no way it’s gonna get better. Then a couple days goes by and BAM another sweet build! Keep it coming!
I did the same thing with my rs1. Running a X3 air to air with fan for Intercooler. Running 2860r turbo as well. The rs1 also has the turbo fuel pump already as well.
I hope that everyone appreciates what has become a rare sight that being a wild Leo working on a machine and not just behind the camera lol but seriously it is great to see everyone working together 😁
WOW! Even though it was a "Costly Loss", you guys can now claim the title that you have been there done that! I cannot wait to see this monster when you run it for the first time! Great job guys!
Awesome vid boys, super excited to see how this turns out. One thing I'm disappointed about, Rick shouted Regulators!... And nobody yelled "Mount up!" Come on boys that's a requirement! 😄
Another thing i have done is take a couple of those old camper jacks with the 3 legs and that have a screw, can use the winch cable kind too, weld a piece of angle iron onto a pivot and then with on each side or end you have a hoist that was used to lift an 11ft camper to lift your quads, i actually used them for adjustable pipe welding and holding loads in place while welding, also for lifting sheds, when lifting a quad run a motorcycle ratchet strap under and hook to both jacks then secure together.
Intriguing engine change out ..fantastic decision to change out the harness at the same time 👍I assure you people at Polaris are watching your channel right now thinking about the future
Doug my man, for the extended reach and a user friendly hack i took a square tube and welded an old Jackall - beam {one with all the holes} and then when i reach out i can put a cleavis through any one of the holes in the jack beam and the load won`t slide. ya gotta have an old jackall for a doner
This thing is gonna scream. As soon as you said turbo motor and Rick was on board all I could picture is the old rat fink in the T-bucket with fire shooting out and front wheels off the ground. You guys kick-a$$. This is awesome. This is why I watch. Keep it up. Ps-love the time lapse with nick just sitting on the Simpson chairs. Lmao
Rick - I'm selling the X3 and building one of these. Leo - Almost has a stroke wondering why Rick would do that when they're building one right this moment.
Awesome stuff guys ! Also thank you for continuing to do stuff during this quarantine/lock down all the things crazy time right now. Super appreciated 👍
Another video this week is awesome! I can imagine more content in a week can be a lot of work but I know that I really appreciate it! Really like the cf2 project idea. Both Rick & Doug working on it seemed to get a lot done in a day. Keep it up guys!
Man with the move and everything else I totally forgot about this rig! Great to see you "reviving it" you ALL always talked about how great it was every time you used it! But I was REALLY hoping you were going to clean it before you dropped in the motor. Oh well...."tough break". ;) But it should be a blast! You guys can def make a regular day into something AWESOME!
Kenneth Flores I seen that right away and was gritting my teeth waiting for the disaster to hit!!! Wow I can’t believe it didn’t slide back and get him!!
@@simpsonrdlarry4385 yeah, easy way to solve a problem before there's a problem. I know there's a certain built 2J in there and if that thing fell off the lift there would be a lot more said than "tough break"
Without a doubt one of the best ideas I’ve ever seen! This thing is going to suck gas and haul ass. Wow. Lenardo I love your light Brite pullover hoodie. Keeping it real while being regulated. Just EPIC guys!
Your guys his content is always on point I’m always excited to see what you guys are going to do next it is so much fun watching you guys I don’t even watch regular TV anymore thank you guys for what you do
YES YES YES. #Baddest fleet in the world!!!One of my favorite machines.!! So underrated. I was just searching on RUclips the other day for a turba rs1 and there is nothing on RUclips. You guys are alright. NO.#1. I’ll bet when yinz getting running times around the new track this one will be hard to beat. Widen it a bit. And it already jumps perfect and will be even better with a few extra pounds in the back to keep it more level. Thanks. P.s. SHOUT out to POLARIS for letting you guys do what you want with another quote on quote loaner. Straight shooters as sous would say. That’s why I bought a po po.
Sooooo Happy this is finally happening it would be cool if ya'll did a 72' suspension off the Turbo S with the wheels and tires as well even the Sparco steering wheel......... I like this more the the 2JZ......but I enjoy everything ya'll do !
Swap Leroys old engine into it 😎🇺🇸 I was thinking how funny it would be if Cooper came to help......then there was a knock at the door. Haha, it would have been hilarious.
Build a simple cage for it! I know I would prefer one in something like that. Just trying to keep yall safe so we continue to see awesome builds and great entertainment!
Once you do the swap Bolt a smart car chassis to the rs1 it is very close in size and should bolt up fairly easy to the frame and then it could be street legal kind of like how the Maverick side by sides with a Volkswagen Beetle chassis
Yeah but that would add probably 200lbs of metal if not more once their done with glass if they keep it. It would be awesome but kinda kills the idea of it being fast but small and lightweight. Maybe they should dedicate a build to a street legal design
This is why i love these guys LOL, full sends 110% of the time even if it includes a machine thats fallin, give her bigger life and let'R eat lol.....best channel on yt bar none!!🤙 and Rick, "this is as harbor freight as it gets" LMAO
Doug power! ... I do feel like Doug might be hitting the weights lately ... Makes sense.. you gotta hang the gun out the door on the trails in the summer
Might as well put the Dynamics and ride command systems in too! Since you had to swap wiring harnesses anyway. In my opinion this setup will be second to none!
I've been subscribed since i saw yall on cleetus channel but yall need to include some of the trail machines as well, ive git a mav 800 trail would be nice to see some content on those too. As always awesome content guys
In a shocking turn of events, Rick is just happy to be part of it. Lol
Unbelievable...
Hey guys I have a ranger midsize crew 570 I was reading where some guys were saying that they have the same engines as do the razors I was wondering if it was possible to turbo a ranger with parts for a razor
You guys are building all the cars Polaris needs to build, nice work boys!
Maybe we can force them into making these things.... Probably not, but we can dream lol.
Chris Fiondella wouldn’t take much to improve a Polaris.i have a Honda now.much better by far
I work across the street sometimes I can hear you guys ripping I love the videos
Haha heck yeah dude!
@@SXSBlog I am very interested in getting a side-by-side don't know which one yet. I am into the mud racing with my Can-Am ATV done this for years I would really like to check out your guys's and find out the goods and the bads of what brand really liking the Honda Talon.
Doug finally getting help in the shop need rick there full time ! Miss angry Rick and his rants those old videos with rick mad were funny as hell !
We'll try our best to keep him angry 😆😆
I need links to such content! Lol
Rick: “this is about as harbor freight as it gets” I want that shirt
Zachary Boarts that’s the best thing I’ve ever heard on this channel 😂 they need to make this a staple saying!
Haha don't hate that idea 😂
Make this shirt happen I will definitely buy one or two
YES😂
Lmao, ya I'd buy a shirt that said that.
sxsblog thank you for the videos on this hard times.
I've been watching you guys 3+ years and I ain't stopping.
Much appreciated, bud!!
By far my favorite channel! Things are happening and people are doing them!
Merica!!! Hell yeah Brother! I figured the RS1 would end up with a turbo! Can't wait to see it ripping!
Does it need it... No.
Do we need to do this.... Heck yeah!!!
Leo, the 90's called! They want their hoodie back!🤣
Leo: I'm gonna wear the heck out of my 90s hoodie
I'm thoroughly enjoying Leo in the drug rug!!! Classic
Austin Wilson haha. Drug rug. So true
My mom used to get a couple of those hoodies every time she went to Tijuana.
Tell them they can't have it.
I remember seeing you guys in Glamis and showed you my Turbo RS1, it should get to the party alot quicker. Great work guys!!!!
Never a boring moment at SXSBLOG!
Classic case of seemed like a good idea at the time coming in the future. 😎
The best part of this video was the time lapse of Rick and Doug working hard and Leo siting in the chair playing angry birds and cruising FB Marketplace.
Damn didn't just through coop under the bus you drove it over him lol 😂
They should be thanking Coop for the motivation to mod this thing🤔👌
Hey cooper thought it was a good idea at the time
Lol, he knows what he did 😂😂😂
@@SXSBlog 😅😅😅
You guys really weren’t kidding this was gonna be a big year every time a project starts I’m thinking there’s no way it’s gonna get better. Then a couple days goes by and BAM another sweet build! Keep it coming!
I did the same thing with my rs1. Running a X3 air to air with fan for Intercooler. Running 2860r turbo as well. The rs1 also has the turbo fuel pump already as well.
Dustin Bieri it has the turbo fuel pump? Missed that in the parts diagrams
Heck yea!! You guys are the reason I bought an RS1! Glad to see it making a comeback!
Heck yeah, great choice! She's coming back with a fury!
Very good project guys! 👍
It's a good thing Doug stays busy otherwise nothing would ever happen. The Nick's just sit around.
What we’ve all been waiting for. Raise hell, praise Dale.
You guys are freaking awesome!!!
Absolutely badass!!! you guys are killing it
I hope that everyone appreciates what has become a rare sight that being a wild Leo working on a machine and not just behind the camera lol but seriously it is great to see everyone working together 😁
Well since the leaf blower didn’t go as planned might as well just “GET ‘ER’ DONE” Heck Yeah Dude !!!
This will be a little better than the leaf blower 😂😂
WOW! Even though it was a "Costly Loss", you guys can now claim the title that you have been there done that! I cannot wait to see this monster when you run it for the first time! Great job guys!
Awesome vid boys, super excited to see how this turns out. One thing I'm disappointed about, Rick shouted Regulators!... And nobody yelled "Mount up!" Come on boys that's a requirement! 😄
I yelled it! Hope that helps a little 🤣
Another thing i have done is take a couple of those old camper jacks with the 3 legs and that have a screw, can use the winch cable kind too, weld a piece of angle iron onto a pivot and then with on each side or end you have a hoist that was used to lift an 11ft camper to lift your quads, i actually used them for adjustable pipe welding and holding loads in place while welding, also for lifting sheds, when lifting a quad run a motorcycle ratchet strap under and hook to both jacks then secure together.
Intriguing engine change out ..fantastic decision to change out the harness at the same time 👍I assure you people at Polaris are watching your channel right now thinking about the future
finally someone did this to a rs1!
Doug my man, for the extended reach and a user friendly hack i took a square tube and welded an old Jackall - beam {one with all the holes} and then when i reach out i can put a cleavis through any one of the holes in the jack beam and the load won`t slide. ya gotta have an old jackall for a doner
This thing is gonna scream. As soon as you said turbo motor and Rick was on board all I could picture is the old rat fink in the T-bucket with fire shooting out and front wheels off the ground. You guys kick-a$$. This is awesome. This is why I watch. Keep it up. Ps-love the time lapse with nick just sitting on the Simpson chairs. Lmao
Rick - I'm selling the X3 and building one of these.
Leo - Almost has a stroke wondering why Rick would do that when they're building one right this moment.
I have been waiting for this project for a long time. Hope it gets some sweet mods. Thanks guys. CF1 -T
Awesome stuff guys ! Also thank you for continuing to do stuff during this quarantine/lock down all the things crazy time right now. Super appreciated 👍
Another video this week is awesome! I can imagine more content in a week can be a lot of work but I know that I really appreciate it!
Really like the cf2 project idea. Both Rick & Doug working on it seemed to get a lot done in a day.
Keep it up guys!
Great build and she going to be a ripper a big tums UP to you and your team for making a amazing machine SXSBlog.com number one #1
I feel like the stars wars sound track would be appropriate for the scene putting the motor because that baby’s going TO THE MOON!
Man with the move and everything else I totally forgot about this rig! Great to see you "reviving it" you ALL always talked about how great it was every time you used it! But I was REALLY hoping you were going to clean it before you dropped in the motor. Oh well...."tough break". ;) But it should be a blast! You guys can def make a regular day into something AWESOME!
Should weld a U bolt on the top of your engine lift to pass your strap through that way it can't slide forward or backwards
Kenneth Flores I seen that right away and was gritting my teeth waiting for the disaster to hit!!! Wow I can’t believe it didn’t slide back and get him!!
@@simpsonrdlarry4385 yeah, easy way to solve a problem before there's a problem. I know there's a certain built 2J in there and if that thing fell off the lift there would be a lot more said than "tough break"
Even better... We got a cheap wood clamp 😎😎😂
Without a doubt one of the best ideas I’ve ever seen! This thing is going to suck gas and haul ass. Wow. Lenardo I love your light Brite pullover hoodie. Keeping it real while being regulated. Just EPIC guys!
Finally turbo rs1 good work boys I dont even own a sxs I love this channel
Your guys his content is always on point I’m always excited to see what you guys are going to do next it is so much fun watching you guys I don’t even watch regular TV anymore thank you guys for what you do
YES YES YES. #Baddest fleet in the world!!!One of my favorite machines.!! So underrated. I was just searching on RUclips the other day for a turba rs1 and there is nothing on RUclips. You guys are alright. NO.#1. I’ll bet when yinz getting running times around the new track this one will be hard to beat. Widen it a bit. And it already jumps perfect and will be even better with a few extra pounds in the back to keep it more level. Thanks. P.s. SHOUT out to POLARIS for letting you guys do what you want with another quote on quote loaner. Straight shooters as sous would say. That’s why I bought a po po.
Don’t even have to watch, this gets a thumbs up just from the title. Had always hoped you would turbo the RS1.
Everyone always says Nick is their spirit animal, but I've always strongly felt that Rick was my spirit animal.
Heck ya DUDE!!!! Been waiting for someone to do this to an RS1!
Sooooo Happy this is finally happening it would be cool if ya'll did a 72' suspension off the Turbo S with the wheels and tires as well even the Sparco steering wheel......... I like this more the the 2JZ......but I enjoy everything ya'll do !
amazing how fast that shop filled up.. now ya need one 2x bigger! lol
I think I’m more excited about this build than the jp build ! Can’t wait for the vids cf1 makes. Stay safe
Awesome build guys can’t wait to see more.
Make it 72" too!🤪
They better or it's going to be on its roof lol
Yes it will be
Spacers and 32 inch carnivores on some offset wheels. My hostages added a couple inches on each side.
Rob Chamberlain they'll do it the expensive way with A-Arms Sway Bars and longer axles.
Love how ur guys content is amazing always something different and enjoyable keep it up brothers glad cleetus lead me to ur channel
Thanks brother!
It's going to be awesome! Now, all it needs is a 72" conversion with an HCR long arm travel kit like the RZR Pro XP got, and it will be perfect! lol.
Would be insane!
Awesome guys started my Saturday perfect😁
haven't seen it run yet and i want one!!! love the vids keep it up boys.
Cool project. My dream was a two stroke sled motor though.
“Things have been removed by the people who have been removing them”
Facts!
Swap Leroys old engine into it 😎🇺🇸
I was thinking how funny it would be if Cooper came to help......then there was a knock at the door. Haha, it would have been hilarious.
You dont want cooper wrenching or driving anything that belongs to you!
It’s amazing how full that shop has gotten.
You guys always thanks yours views always humble, keep the good work
RZR lives again thanks JP
Gosh dang ALL THE PROJECTS at once, loving it
So many projects lol
Love it! So sick the driving experience in those single seaters
There's only one thing better to wake up to than a blog video..... and that can't be said on a blog video.....
Hell yeah can't wait to see it fire up. Love the videos BTW.
Build a simple cage for it! I know I would prefer one in something like that. Just trying to keep yall safe so we continue to see awesome builds and great entertainment!
Freaking awesome. You need to mix some some live content in. Greatest SxS channel on RUclips
cool build and i like the new music youve been using leo.
Once you do the swap Bolt a smart car chassis to the rs1 it is very close in size and should bolt up fairly easy to the frame and then it could be street legal kind of like how the Maverick side by sides with a Volkswagen Beetle chassis
Yeah but that would add probably 200lbs of metal if not more once their done with glass if they keep it. It would be awesome but kinda kills the idea of it being fast but small and lightweight. Maybe they should dedicate a build to a street legal design
Hell yea man surprised this hasn't happened sooner
Lot of things going on.
Oh yea I've been watching love the content keep up the good work👍👍👍🤙🤙🤙
Considering SXS's are not boats, that sucker took it like a champ. 🤘😎
This is why i love these guys LOL, full sends 110% of the time even if it includes a machine thats fallin, give her bigger life and let'R eat lol.....best channel on yt bar none!!🤙 and Rick, "this is as harbor freight as it gets" LMAO
The Best RUclips Channel!
Sxsblog the pioneers of sxs chaos!! Bring it to FF with JP2JZ
Wow! This unit has been sitting a while.
Best video yet! Can’t wait to see her in action!
Yeah you just know that the Jurassic park engines gonna have a lot of pulling torque over the RS1’s engine! What a little Monster!
Ya!!! Rick is in the intro now!!! Sweet!
can’t wait to see the 0-60 comparisons and gauntlet laps
Hey I got to looking at the bench seat you guys made you should make some brackets to put tires on the side of it
This will be the best unit in the history of units...possibly ever.
Leo is gonna heck the heck out of the heck out of stuff catch phrase.
Doug power! ... I do feel like Doug might be hitting the weights lately ... Makes sense.. you gotta hang the gun out the door on the trails in the summer
Might as well put the Dynamics and ride command systems in too! Since you had to swap wiring harnesses anyway. In my opinion this setup will be second to none!
The rs1 has always been a beast of a car. Yee-yee brother.
...I'm standing here putting my YXZ transmission back together... And drinking.. obviously. Might go look for my own CF1 project next 👏
Heck yeah!!!
That’s going to be the best trail machine ever once you get live valve suspension put into it. RS1 pro xp! Lol
What a freaking tease. Can't wait to see it rip the original gauntlet. Please tell me yall are still going to do OG gauntlet stuff. ✊😗
A long awaited mod. This will be so sick for sure.
I've been subscribed since i saw yall on cleetus channel but yall need to include some of the trail machines as well, ive git a mav 800 trail would be nice to see some content on those too. As always awesome content guys
Awesome job! Can’t wait to see it rippin!
Sorry for Yelling 🤘😁🤘 it’s so fn awesome to see it all come together 🙌🙌🙌
I love your no fear attitude and just do it mentality. That rs1 is gonna be fun to drive. Will you be adding even more power in the future?
Been wanting a long time for this build
The front drive shaft is weak on the rs1. Check out kb3. They have the beefy drive shafts needed for this.
Classic. You guys rock man. I've got a wildcat 1000 and would love to upgrade it. H E L P
Glad the new shop is in Mexico and not under Whitless lock down restrictions.
you should post the swamp back to cletus as sub mail with a repair bill on toilet paper that would be so funny in his sub vid lol
Polaris easy to come apart because they know you'll be working on it all the time
How do you even pick what to take on a ride? Everything’s a ripper! Keep the videos common’ boys. It is keeping up morale for sure.
Loving the projects guys!